Weatronic

Weatronic

WEATRONIC is a High technology manufacturing company, located in the Aerospace Center in Wildau, Germany (Just outside Berlin).Weatronic offers you a superior RF system making the best use of modern electronics technology providing you unsurpassed reliability and performance. Quality and reliability are the top priorities for our experienced hardware and software engineers. We want you to confidently fly your WEATRONIC® radio, knowing that you are flying the very best system available today. In addition we are modelers, we fly the same systems, we proudly build for you.

Products


  • Weatronic Clever 6 Receiver 2.4 FHSS

    Weatronic Clever 6 Receiver 2.4 FHSS

    Weatronic Clever 6 Receiver 2.4 FHSS. This is an extremely sensitive high-quality 2.4 Dual FHSS 12-channel receiver with enormous interference resistance.
    The signal packets from the antenna are continuously evaluated and assessed for completeness and validity. This and other controller functions are handled by a 32-bit ARM processor. Each channel can be programmed separately for failsafe. The receivers of the 2.4 Dual FHSS “Clever” series, like the large onboard electronics, are designed for maximum security. This includes: a watchdog function, complex fault clearance at outputs, high current carrying capacity, 5 Volt signal voltage, operating voltage 4 to 10 Volts. Naturally the “Clever” series is fully updatable and programmable and is equipped with the weatronic® telemetry functions.
     
    Specifications:

    • Transmission: Adaptive Frequency Hopping
    • Frequency Range: 2,401 - 2,4835 GHz
    • Hopping-Frequency:81, in France: 52
    • Hopping-Speedt: 10 ms
    • Receive Sensitivity: -100 dBm
    • Output: 20 dBm (100 mW)
    • Range: < 1500 m
    • Antenna:1 x 90 mm - effective antenna length: 29 mm
    • Servo-outputs: 6
    • Resolution control channels: 4096 Steps
    • Operating Voltage: 4.0 - 10.0 Volt
    • Current consumption: Max. 130 mA
    • Current load: Max. 5 A continuous Current
    • Temperature Range:-10° C bis +60° C
    • Dimensions: 46,5 x 24,1 x 13,1 mm
    • Weight: 9 g
    • Feedback channel for telemetry
    • and sensor data:Standard: Battery voltage, signal quality
    • Firmware: Updateable via USB-Adapter

    Includes:

    • Dual Receiver Clever 6
    • Binding-Jumper
    • Clever Quick Guide

    Note:

    Availability after 2 weeks

    SKU: WEA37683
    €89.99
    inc. VAT

  • Weatronic Micro 10 Dual Receiver 2.4 Dual FHSS

    Weatronic Micro 10 Dual Receiver 2.4 Dual FHSS

    Weatronic Micro 10 Dual Receiver 2.4 Dual FHSS. This series has been developed for medium-sized models.
    This receiver is a high-quality, updatable and fully programmable 2.4 GHz dual FHSS dual receiver. This 12-channel receiver is developed for connecting up to 10 servos with extreme sensitivity and enormous interference resistance. There are two HF components, each of which is controlled by an antenna. This means that full receiving diversity is assured. The signal packets from the two antennae are continuously evaluated and assessed for completeness and validity. This and other controller functions are handled by a 32-bit ARM processor. Each channel can be programmed separately for failsafe. The dual receivers of the 2.4 Dual FHSS “micro” series, like the large onboard electronics, are designed for maximum security. This includes: a double watchdog function, complex fault clearance at outputs, high current carrying capacity, 5 Volt signal voltage, operating voltage 4 to 10 Volts.

    Specifications:
    • Transmission: Adaptive Frequency Hopping
    • Frequency Range: 2,401 - 2,4835 GHz
    • Hopping-Frequency:81, in France: 52
    • Hopping-Speedt: 10 ms
    • Receive Sensitivity: -100 dBm
    • Output: 20 dBm (100 mW)
    • Range: > 3000 m
    • Antenna:2 x 90 mm - effective antenna length: 29 mm
    • Servo-outputs: 10
    • Resolution control channels: 4096 Steps
    • Operating Voltage: 4.0 - 10.0 Volt
    • Current consumption: Max. 130 mA
    • Current load: Max. 5 A continuous Current
    • Temperature Range:-10° C bis +60° C
    • Dimensions: 54,8 x 34 x 18,8 mm
    • Weight: 30 g
    • Feedback channel for telemetry
    • and sensor data:Standard: Battery voltage, signal quality
    • Firmware: Update via USB-Adapter
    Package Included:
    • Dual Receiver Micro 10
    • Jumper
    • Micro Quick Guide

    Note:

    • Availability after 2 weeks
    SKU: WEA37694
    €164.99
    inc. VAT

  • Weatronic Radio transmitter BAT60 with 10CH receiver, Carry case- special offer

    Weatronic Radio transmitter BAT60 with 10CH receiver, Carry case- special offer

    With the new transmitter BAT 60 weatronic sets a new standard. New design and colors and all the technical features will make your heart beat faster. Amazing high quality, 9 ball bearing per stick, the non-wearing hall sensors, the new battery management and - last but not least - the brand new innovative stick design with the clever concept of interchangeable feedback parts convinced even the last critics.

    From now on there is no limit for channels or predetermined structures. Up to 96 (!) free configurable functions could directly control up to 64 servos, 32 virtual switches, 16 flight phases, 96 limiters and 96 mixers together with other highlights make all your dreams come true. Other solutions as for example screenshots and a complete model management with copy, edit and export of models are the results of our long lasting practical experience. As a development from the leader in reliable data-communication our bidirectional redundant transmission system, the flight-controller separated from the Linux processor as well as the intelligent battery management speak for themselves. Yet another highlight of this transmitter is the new stick design meeting all the possible requirements of model makers including the novel gas/braking lever solution.

    High-tech standard made in Germany in the Aeronautic Centre:

    • Proprietary gimbal design with 9 ball bearings
    • wear-free thanks to the hall-sensors
    • innovative gas- / brake handle concept
    • 22 free programmable control elements
    • 5ʺ capacitive touch screen 800 x 480 colour LCD
    • „Look and find“ function due to built in GPS receiver
    • web interface for external access and programming
    • separate charge controller for each Li-Ion cell
    • one battery is always reserved at 25% reserve capacityfor the safer landing
    • micro-SD card for data recording
    • USB-A and USB-B (master and slave)
    • 3,5 mm headphones socket
    • two parallel transmitting and receiving systems
    • optional 3-axial gyro
    • optional 3-axial positioning with acceleration sensors
    • optional WLAN and Bluetooth, UMTS via USB
    • optional with control functions in stick and selectable stick length

    Programming and adjusting:

    The new BAT 60 - now the pilot can adjust his model, with all GigaControl options, directly with the transmitter. Simple - easy to understand - and intuitive for all users, from the beginner to the advanced.

    Technical data:

    •   transmission: adaptive frequency hopping operation with “listen before talk” function
    •   hopping-frequencies: 80
    •   hopping-speed: 100 Hz
    •   antennas: 2 x patch antennas (angle of radiation > 180°)
    •   4 Li-Ion batteries à 3000 mAh
    •   integrated GPS receiver
    •   operating- and charging voltage: 10,0 - 20,0 Volt
    •   temperature range: -10° C to  +60° C, non-condensing
    •   dimensions: 220 x 200 x 51 mm

    Included:

    • Transmitter BAT 60
    • Receiver 10ch
    • Carry case
    SKU: BAT60HAND
    €1199.00 €1699.00
    inc. VAT

     LOW STOCK
    SALE

Manufacturers