Transmitters & Radios

Transmitters & Radios

 Radios and transmitters from Top brands, as Futaba, Spektrum, Hitec and others.

Products


  •  Mikado VBar VBar Control Custom Line Honeycomb, VBasic Receiver

    Mikado VBar VBar Control Custom Line Honeycomb, VBasic Receiver

    Mikado VBar VBar Control Custom Line Honeycomb, VBasic Receiver

    Note:

    The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

    Software Highlights:

    • Set up, programming and adjusting of VBar-controlled model helicopters accomplished directly via VBar Control transmitter.
    • No computer, control panel or smartphone necessary.
    • Instant access to almost every flight parameter from the transmitter controls, even in flight.
    • Easy programming for new helicopters via the familiar VBar setup wizard.
    • New ESC setup wizard for programming all types of speed controllers.
    • Bank switching with three banks.
    • Real time logging and real time vibration analysis readable from the transmitter.
    • Several telemetry functions are available, such as voltages, current, rpm, speed, and power consumption of the batteries (may need aditional hardware).
    • Storage of event log files like VBar event log, VBar Control event log, GPS way points, voltage/current logging etc.
    • Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
    • Wireless buddy boxing with two VBar Control transmitters, fully configurable.
    • Easy bind process, allows bind and fly of any model equipped with VBar Control (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
    • Software updates via internet using a simple VBar Control Manager app and the web browser.
    • Option for adding new features via apps, simple installation via internet, supports both Windows and Mac OS X-PCs, no drivers needed.
    • Airplane software availabe as a firmware update to existing Mini and full size VBars and as an App for VBar Control.

    Hardware Highlights:

    • 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
    • VBar Control Satellite Receiver connects directly to VBar flybarless controller via 2.4GHz VBar-Link protocol.
    • Unlimited model memory.
    • Virtually unlimited number of control channels.
    • High range, low latency, antenna diversity on both transmitter and receiver.
    • Intelligent antenna monitoring and management.
    • XXtra Bright Graphic Display featuring high contrast and ambient light sensor to automatically control the display brightness, making it equally well readable in bright sunlight and in the dark.
    • Easy Dialog System with rotary dial for convenient and safe inputs, with optical, tactile and acoustic feedback.
    • Precision gimbals with four ball bearings, fully adjustable.
    • Collective stick equipped with optional throw limiter.
    • Fully equipped with four 3-position-switches, two quick-break-switches and two rotation knobs, all fully programmable.
    • Delicate rubber lining for comfortable, slip-free and safe holding.
    • 3-point neck-strap attachment, for optimum balance.
    • Large 2 Watt loudspeaker for alarms and voice output.
    • Vibration alarm (adjustable).
    • Internal 8 MB flash memory.
    • Memory accessible as a USB memory stick, no drivers needed.
    • 4.000 mAh Lithium Polymer battery allows for long run times.
    • Charge through USB connector or built-in charger.
    • Power Supply for fast charging included.

    Specifications VBar Control:

    • Band: 2,4 GHz
    • Flight Mode: Mode 1-4 (Mode 2 default)
    • Model Type: All model types and genres up to 9 servos, free programming via Macrocells, fully updatable to VBar NEO Pro or Pro+Rescue (purchase through our App Store).
    • Telemetry: Telemetry with optional sensors available
    • Frame Rate: 10 ms
    • Range: Full
    • Modulation: 80 Chanel FHSS
    • Proportional inpits: 12
    • Flight Modes: 4 Positions
    • Memory: Flashmemory
    • Transmitter Battery: Lipo 1S 4000mAh
    • Charger: Intl and Domestic AC adapter /USB charging

    Content:

    • VBar Transmitter:VBar Control
    • VBar Receiver: VBar NEO VBasic Receiver
    • VBar: -
    • Charger: External fast charger with Intl and Domestic AC adapter
    • Accessories: USB cable, Neck strap, VBar Control key chain

     

    SKU: MIK-05071
    €799.00
    inc. VAT

     72HR STOCK
  • Alias Ready 2.4Ghz 6-Channel Transmitter

    Alias Ready 2.4Ghz 6-Channel Transmitter

    Alias Ready 2.4Ghz 6-Channel Transmitter

    SKU: TRX6639
    €48.90
    inc. VAT

     72HR STOCK
  • DJI Spark Transmitter

    DJI Spark Transmitter

    Control your DJI Spark using the official remote controller.
    It uses a brand new Wi-Fi transmission system, which can control the aircraft and camera at a maximum range of 1.2mi (2km).
    The mobile device holder on the remote will let you display a live video feed from your Spark to the DJI GO4 App.
    The remote control has a battery life of approximately 2.5 hours.
    Unfortunately the Spark remote isn't backwards compatible with the Mavic Pro.

    Operating Frequency:
    2.412-2.462 GHz; 5.745-5.825 GHz

    Max Transmission Distance:
    2.412 - 2.462 GHz (unobstructed, free of interference)
    FCC: 1.2 mi (2 km); CE: 0.3 mi (500 m); SRRC: 0.3 mi (500 m)
    5.745 - 5.825 GHz (unobstructed, free of interference)
    FCC: 1.2 mi (2 km); CE: 0.18 mi (300 m); SRRC: 0.7 mi (1.2 km)

    Operating Temperature Range:
    32° to 104° F (0° to 40° C)

    Battery:
    2970 mAh

    Transmitter Power (EIRP):
    2.4 GHz
    FCC: ≤26 dBm; CE: ≤18 dBm; SRCC: ≤18 dBm
    5.8 GHz
    FCC: ≤28 dBm; CE: ≤14 dBm; SRCC: ≤26 dBm

    Operating Current/Voltage:
    950 mAh @3.7 V

    Supported Mobile Device Size:
    Thickness range: 6.5-8.5 mm
    Max length: 160 mm

    SKU: DJI-SPARK-PART4
    €179.00
    inc. VAT

     LOW STOCK
    NEW
  • Frsky Horus X12S Grey Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S Grey Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S Space Grey Radio 2.4Ghz ACSST Mode 2

    The long awaited high end transmitter from FrSKY.  Comes with a hard case for transport.
    The FrSky Horus X12D 16/32 channel RC Transmitter features:

    • Aluminium CNC base gimbals with high resolution magnetic angle sensors
    • High resolution IPS screen (800*480), touch operation supported
    • Bluetooth 4.0
    • Voice broadcast and recognition
    • Inbuilt 9-axis sensor, do everything you can imagine
    • Inbuilt GPS and WiFi*
    • FrSky OS installed, easy for beginners and expansible for advanced users
    • Support open source firmware, such as openT
    • Industrial high resolution screen (480*272), readable outdoor
    • All CNC gimbal with 6 ball bearings, accuracy hall sensor and extensible by stick ends
    • Inbuilt GPS module
    • Inbuilt wireless trainer system
    • Inbuilt 6-axis sensors (3-axis gyro and 3-axis accelerator)
    • Two types of aluminum panels (matt or texture)
    • 16 channels (up to 32 channels)
    • Audio speech function
    • Full telemetry and real-time data logging
    • Antenna detection and SWR warning
    • Receiver match
    • Newly designed internal RF module IXJT with lower latency and higher stability
    • Inbuilt antenna as default, external antenna could be added (for internal RF module)
    • External module bay
    • Safe power switch with integrated strap base
    • Two types of trainer ports
    • MP3 player
    • Haptic feedback
    • NiMH batteries with inbuilt charging circuit
    • 6 position encoder for easier flight modes switch
    • FrSky FrTX operation system installed as default, Open source firmware supported

    Set contains:

    • TX Horus X12S
    • AC Charger 220V.
    • Neck strap
    • Aluminium Case
    SKU: HORUS-X12D-GREY
    €559.90
    inc. VAT

     LOW STOCK
  • Frsky Horus X12S SILVER Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S SILVER Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S SSILVER COLOR Radio 2.4Ghz ACSST Mode 2

    The long awaited high end transmitter from FrSKY.  Comes with a hard case for transport.
    The FrSky Horus X12D 16/32 channel RC Transmitter features:

    • Aluminium CNC base gimbals with high resolution magnetic angle sensors
    • High resolution IPS screen (800*480), touch operation supported
    • Bluetooth 4.0
    • Voice broadcast and recognition
    • Inbuilt 9-axis sensor, do everything you can imagine
    • Inbuilt GPS and WiFi*
    • FrSky OS installed, easy for beginners and expansible for advanced users
    • Support open source firmware, such as openT
    • Industrial high resolution screen (480*272), readable outdoor
    • All CNC gimbal with 6 ball bearings, accuracy hall sensor and extensible by stick ends
    • Inbuilt GPS module
    • Inbuilt wireless trainer system
    • Inbuilt 6-axis sensors (3-axis gyro and 3-axis accelerator)
    • Two types of aluminum panels (matt or texture)
    • 16 channels (up to 32 channels)
    • Audio speech function
    • Full telemetry and real-time data logging
    • Antenna detection and SWR warning
    • Receiver match
    • Newly designed internal RF module IXJT with lower latency and higher stability
    • Inbuilt antenna as default, external antenna could be added (for internal RF module)
    • External module bay
    • Safe power switch with integrated strap base
    • Two types of trainer ports
    • MP3 player
    • Haptic feedback
    • NiMH batteries with inbuilt charging circuit
    • 6 position encoder for easier flight modes switch
    • FrSky FrTX operation system installed as default, Open source firmware supported

    Set contains:

    • TX Horus X12S
    • AC Charger 220V.
    • Neck strap
    • Aluminium Case
    SKU: HORUS-X12D-SIL
    €559.90
    inc. VAT

     72HR STOCK
  • Frsky Horus X12S Texture Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S Texture Version 16 Channels Inbuilt GPS Module Transmitter Set

    Frsky Horus X12S Gray Texture Radio 2.4Ghz ACSST Mode 2

    The long awaited high end transmitter from FrSKY.  Comes with a hard case for transport.
    The FrSky Horus X12D 16/32 channel RC Transmitter features:

    • Aluminium CNC base gimbals with high resolution magnetic angle sensors
    • High resolution IPS screen (800*480), touch operation supported
    • Bluetooth 4.0
    • Voice broadcast and recognition
    • Inbuilt 9-axis sensor, do everything you can imagine
    • Inbuilt GPS and WiFi*
    • FrSky OS installed, easy for beginners and expansible for advanced users
    • Support open source firmware, such as openT
    • Industrial high resolution screen (480*272), readable outdoor
    • All CNC gimbal with 6 ball bearings, accuracy hall sensor and extensible by stick ends
    • Inbuilt GPS module
    • Inbuilt wireless trainer system
    • Inbuilt 6-axis sensors (3-axis gyro and 3-axis accelerator)
    • Two types of aluminum panels (matt or texture)
    • 16 channels (up to 32 channels)
    • Audio speech function
    • Full telemetry and real-time data logging
    • Antenna detection and SWR warning
    • Receiver match
    • Newly designed internal RF module IXJT with lower latency and higher stability
    • Inbuilt antenna as default, external antenna could be added (for internal RF module)
    • External module bay
    • Safe power switch with integrated strap base
    • Two types of trainer ports
    • MP3 player
    • Haptic feedback
    • NiMH batteries with inbuilt charging circuit
    • 6 position encoder for easier flight modes switch
    • FrSky FrTX operation system installed as default, Open source firmware supported

    Set contains:

    • TX horus X12S
    • AC Charger 220V.
    • Neck strap
    • Aluminium Case
    SKU: HORUS-X12D-TEXTURE
    €559.90
    inc. VAT

  • FrSky Taranis Q X7 Digital Telemetry Radio Transmitter 2.4GHz ACCST Black

    FrSky Taranis Q X7 Digital Telemetry Radio Transmitter 2.4GHz ACCST Black

    Frsky have put their reliable and well-known frequency hopping ACCST technology into the new Taranis Q X7 radio system with addition of full telemetry. All the usual Taranis features are used in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.
     
    There is a new look case that comes in either black or white. Once again the excellent Quad Ball-Bearing Gimbals are used and it is up to you to determine what mode to set the radio to and also if you want self-centering spring loaded sticks (standard) or the usual stationary set throttle.
     
    The Taranis mixes the power of the “OPEN TX” open-source software with an ergonomic case with 6 programmable switches (4 x 3-position, 1 x 2-position, 1 x momentary) and two twist knobs. Set up your switches and controls how you want them.
     
    Alerts can be presented in the form of audio speech outputs, sound or vibration alerts making this extremely user-friendly. The MicroSD card slot offers unlimited model memory options, it also has a USB port for upgrades and to connect to a PC for adjusting settings. As well as this there is the ability to use all your model files from the older TARANIS X9D/X9D Plus/X9E making it easy to get the new system up and working.
     
    The FrSky Taranis Q X7 is a very versatile, cost effective radio.
     
    Features:

    • Quad Ball Bearing Gimbals
    • Receiver Match
    • Audio Speech Outputs (values, alarms, settings, etc.)
    • Real-time Flight Data Logging
    • Receiver Signal Strength Indicator (RSSI) Alerts
    • Super Low Latency
    • Vibration Alerts
    • Model files are compatible with TARANIS X9D/X9D Plus/X9E.
    • Open source firmware OpenTx installed.Model Name: Taranis Q X7
    • Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)
    • Operating Current: 210mA maximum (both RF module and backlit are on)
    • Operating Temperature: -10~45℃
    • Backlight LCD Screen: 128*64 outdoor readable LCD
    • Model Memories: 60 (extendable by SD card)
    • Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used)

     Features:

    • Quad Ball Bearing Gimbals
    • Receiver Match
    • Audio Speech Outputs (values, alarms, settings, etc.)Antenna Status Detection and adjustment
    • Real-time Flight Data Logging
    • Receiver Signal Strength Indicator (RSSI) Alerts
    • Super Low Latency
    • Smart Port Supported
    • Vibration Alerts
    • Model configuration files compatible with TARANIS X9D Plus  

    Note: The battery is not included .
     
    Including:

    • 1 x Taranis Q X7
    • 1 x Manual
    • 1 x Neck strap
    SKU: FRSKYQX7BL
    €139.90
    inc. VAT

     LOW STOCK
  • FrSky Taranis Q X7 Digital Telemetry Radio Transmitter 2.4GHz ACCST White

    FrSky Taranis Q X7 Digital Telemetry Radio Transmitter 2.4GHz ACCST White

    Frsky have put their reliable and well-known frequency hopping ACCST technology into the new Taranis Q X7 radio system with addition of full telemetry. All the usual Taranis features are used in this radio such as Receiver Signal Strength Indicator (RSSI) alerts, Real-time Flight Data Logging and receiver matching.
     
    There is a new look case that comes in either black or white. Once again the excellent Quad Ball-Bearing Gimbals are used and it is up to you to determine what mode to set the radio to and also if you want self-centering spring loaded sticks (standard) or the usual stationary set throttle.
     
    The Taranis mixes the power of the “OPEN TX” open-source software with an ergonomic case with 6 programmable switches (4 x 3-position, 1 x 2-position, 1 x momentary) and two twist knobs. Set up your switches and controls how you want them.
     
    Alerts can be presented in the form of audio speech outputs, sound or vibration alerts making this extremely user-friendly. The MicroSD card slot offers unlimited model memory options, it also has a USB port for upgrades and to connect to a PC for adjusting settings. As well as this there is the ability to use all your model files from the older TARANIS X9D/X9D Plus/X9E making it easy to get the new system up and working.
     
    The FrSky Taranis Q X7 is a very versatile, cost effective radio.
     
    Features:

    • Quad Ball Bearing Gimbals
    • Receiver Match
    • Audio Speech Outputs (values, alarms, settings, etc.)
    • Real-time Flight Data Logging
    • Receiver Signal Strength Indicator (RSSI) Alerts
    • Super Low Latency
    • Vibration Alerts
    • Model files are compatible with TARANIS X9D/X9D Plus/X9E.
    • Open source firmware OpenTx installed.Model Name: Taranis Q X7
    • Operating Voltage Range: 6~15V (2S, 3S Lipos are acceptable)
    • Operating Current: 210mA maximum (both RF module and backlit are on)
    • Operating Temperature: -10~45℃
    • Backlight LCD Screen: 128*64 outdoor readable LCD
    • Model Memories: 60 (extendable by SD card)
    • Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used)

     Features:

    • Quad Ball Bearing Gimbals
    • Receiver Match
    • Audio Speech Outputs (values, alarms, settings, etc.)Antenna Status Detection and adjustment
    • Real-time Flight Data Logging
    • Receiver Signal Strength Indicator (RSSI) Alerts
    • Super Low Latency
    • Smart Port Supported
    • Vibration Alerts
    • Model configuration files compatible with TARANIS X9D Plus  

    Note: The battery is not included .
     
    Including:

    • 1 x Taranis Q X7
    • 1 x Manual
    • 1 x Neck strap
    SKU: FRSKYQX7WH
    €139.90
    inc. VAT

     LOW STOCK
  • FUTABA 18SZ 2.4Ghz Radio + 2x R7008SB RECEIVER- special offer

    FUTABA 18SZ 2.4Ghz Radio + 2x R7008SB RECEIVER- special offer

    This is the preorder for Newest Futaba 18 SZ. the rado come in Choise of MODES.

    The new Futaba 18SZ includes an amazing array of features that are sure to please all airplane, helicopter and multirotor pilots. Eighteen channels allow even the most complex of models to be controlled. A large, color LED touchscreen and display simplifies data entry and programming tasks. Additional features include flight conditions, S.Bus servo programming capabilities and several selectable languages. The included Futaba R7008SB FASSTest 8+ channel S.Bus receiver enables bi-directional communication and the use of a variety of Futaba telemetry sensors. The first delivery scheduled at October 2015, orders will be sent our per orders placed.

    For many years Futaba have led the way with the ultimate in radio systems, and they have done it again with their new T18SZ.

    Packed full of possibilities, the T18SZ includes a Li-Fe battery for extended run times, S-FHSS, T-FHSS, FASST and FASSTest transmission systems, 4.3" colour ultra quick response touch screen, flight conditions, a massive range of mixing and programming options for Aircraft, Gliders, Helicopters and Multirotors, Telemetry, Data Logging, etc, not to mention full 18 channel operation.

    Supplied complete with the 8 18 channel R7008SB receiver, the T18SZ is the perfect radio for any serious pilot, and of course the regular software updates provided by Futaba will keep this superb radio up to date.

    • Futaba 2.4GHz FASSTest, FASST, T-FHSS, S-FHSS Modulation
    • 18 Channel (16 Linear + 2 Digital)
    • 30 Internal Model Memory
    • SD Card External Model Memory (SDHC is available.)
    • Telemetry System (Details Below)
    • Voice Message
    • Easy Software Updates using SD card
    • Stick Calibration
    • Ultra-Fast 109mm (4.3") Colour TFT-LCD Touch Screen
    • 2 Front Dials
    • 2 Side Levers
    • 6 Trim Levers
    • 8 Toggle Switch
    • Long life LiFe Battery (LT2F2100B)
    • Antenna Angle Adjustment (90 degree and 3 step Rotation)
    • Built-in Speaker
    • Earphone Jack
    • S.BUS I/F (with Power Supply)
    • Trainer PPM 8CH / PPM 12CH / S.BUS (16CH)
    • Trainer S.BUS Port
    • Adjustable Angle Sticks
    • Built-In Vibrator

    Basic Program Features

    • 15 Character User Names
    • 15 Character Model Names
    • Condition Name
    • Function Setting
    • Function Rename (AUX function only)
    • Sub Trim (±240 steps)
    • Servo Reverse
    • Fail Safe
    • Battery Fail Safe (All Channels on FASSTest/FASST-Multi/S-FHSS, 3 Channel FASST 7CH)
    • EPA (30 - 140% with Limit setting)
    • Servo Speed Adjustment
    • Trim Setting (Step, Rate, Mode)
    • Flight Condition (Maximum 8 conditions)
    • AFR (D/R)
    • AFR Curve Mode (3 Types)
    • AFR Curve Point Number (Maximum 17 points)
    • Programmable Mixing (10 per Condition)
    • Throttle Cut
    • Idle down
    • Logic switch (Condition switch only)
    • Data editor for S.BUS equipment
    • Servo Monitor (with NT and Moving Test)
    • 2 Up/Down Timers
    • Integral Timer (System Timer)
    • Model Timer
    • Stick Alarm

    Telemetry Options

    • Receiver Battery
    • Temperature Sensor
    • RPM Sensor (Magnetic)
    • RPM Sensor (Optic)
    • Altitude Sensor (with Vario)
    • GPS Sensor (Included Altitude Sensor)
    • Voltage Sensor
    • Current Sensor
    • Voice
    • Data Logging    

    Specification

    • Dials:    2
    • Memory:Expandable SD/SDHC Card Slot
    • Mode:Mode 2 or 1.
    • Model Memory:30 (+ SD/SDHC Card)
    • Modulation:Futaba 2GHz FASST, FASSTest, T-FHSS, S-FHSS
    • Receiver:R7008SB 2.4GHz FASSTest (Inc.)
    • S.BUS:    S.Bus & S.Bus2
    • Screen:    109mm (4.3") TFT-LCD Colour Touch Screen (Inc.)
    • Sliders:2
    • Speaker:(Inc.)
    • Switches:8
    • Telemetry:T-FHSS & FASSTest Telemetry + Voice
    • Trims:6
    • Battery:FT2F2100B 2100mAh Li-Fe (Inc.)
    • Channels:18 (16 Full + 2 Switch)

        

    SKU: FUT18SZ-SP
    €1099.99
    inc. VAT

     LOW STOCK
  • FUTABA 18SZ 2.4Ghz Radio + R7008SB RECEIVER

    FUTABA 18SZ 2.4Ghz Radio + R7008SB RECEIVER

    This is the preorder for Newest Futaba 18 SZ. the rado come in Choise of MODES.

    The new Futaba 18SZ includes an amazing array of features that are sure to please all airplane, helicopter and multirotor pilots. Eighteen channels allow even the most complex of models to be controlled. A large, color LED touchscreen and display simplifies data entry and programming tasks. Additional features include flight conditions, S.Bus servo programming capabilities and several selectable languages. The included Futaba R7008SB FASSTest 8+ channel S.Bus receiver enables bi-directional communication and the use of a variety of Futaba telemetry sensors. The first delivery scheduled at October 2015, orders will be sent our per orders placed.

    For many years Futaba have led the way with the ultimate in radio systems, and they have done it again with their new T18SZ.

    Packed full of possibilities, the T18SZ includes a Li-Fe battery for extended run times, S-FHSS, T-FHSS, FASST and FASSTest transmission systems, 4.3" colour ultra quick response touch screen, flight conditions, a massive range of mixing and programming options for Aircraft, Gliders, Helicopters and Multirotors, Telemetry, Data Logging, etc, not to mention full 18 channel operation.

    Supplied complete with the 8 18 channel R7008SB receiver, the T18SZ is the perfect radio for any serious pilot, and of course the regular software updates provided by Futaba will keep this superb radio up to date.

    • Futaba 2.4GHz FASSTest, FASST, T-FHSS, S-FHSS Modulation
    • 18 Channel (16 Linear + 2 Digital)
    • 30 Internal Model Memory
    • SD Card External Model Memory (SDHC is available.)
    • Telemetry System (Details Below)
    • Voice Message
    • Easy Software Updates using SD card
    • Stick Calibration
    • Ultra-Fast 109mm (4.3") Colour TFT-LCD Touch Screen
    • 2 Front Dials
    • 2 Side Levers
    • 6 Trim Levers
    • 8 Toggle Switch
    • Long life LiFe Battery (LT2F2100B)
    • Antenna Angle Adjustment (90 degree and 3 step Rotation)
    • Built-in Speaker
    • Earphone Jack
    • S.BUS I/F (with Power Supply)
    • Trainer PPM 8CH / PPM 12CH / S.BUS (16CH)
    • Trainer S.BUS Port
    • Adjustable Angle Sticks
    • Built-In Vibrator

    Basic Program Features

    • 15 Character User Names
    • 15 Character Model Names
    • Condition Name
    • Function Setting
    • Function Rename (AUX function only)
    • Sub Trim (±240 steps)
    • Servo Reverse
    • Fail Safe
    • Battery Fail Safe (All Channels on FASSTest/FASST-Multi/S-FHSS, 3 Channel FASST 7CH)
    • EPA (30 - 140% with Limit setting)
    • Servo Speed Adjustment
    • Trim Setting (Step, Rate, Mode)
    • Flight Condition (Maximum 8 conditions)
    • AFR (D/R)
    • AFR Curve Mode (3 Types)
    • AFR Curve Point Number (Maximum 17 points)
    • Programmable Mixing (10 per Condition)
    • Throttle Cut
    • Idle down
    • Logic switch (Condition switch only)
    • Data editor for S.BUS equipment
    • Servo Monitor (with NT and Moving Test)
    • 2 Up/Down Timers
    • Integral Timer (System Timer)
    • Model Timer
    • Stick Alarm

    Telemetry Options

    • Receiver Battery
    • Temperature Sensor
    • RPM Sensor (Magnetic)
    • RPM Sensor (Optic)
    • Altitude Sensor (with Vario)
    • GPS Sensor (Included Altitude Sensor)
    • Voltage Sensor
    • Current Sensor
    • Voice
    • Data Logging    

    Specification

    • Dials:    2
    • Memory:Expandable SD/SDHC Card Slot
    • Mode:Mode 2 or 1.
    • Model Memory:30 (+ SD/SDHC Card)
    • Modulation:Futaba 2GHz FASST, FASSTest, T-FHSS, S-FHSS
    • Receiver:R7008SB 2.4GHz FASSTest (Inc.)
    • S.BUS:    S.Bus & S.Bus2
    • Screen:    109mm (4.3") TFT-LCD Colour Touch Screen (Inc.)
    • Sliders:2
    • Speaker:(Inc.)
    • Switches:8
    • Telemetry:T-FHSS & FASSTest Telemetry + Voice
    • Trims:6
    • Battery:FT2F2100B 2100mAh Li-Fe (Inc.)
    • Channels:18 (16 Full + 2 Switch)

        

    SKU: FUT18SZ
    €969.00
    inc. VAT

     LOW STOCK
  • Futaba FX-32 Tray version radio with receiver R7008 2.4 GHz FASSTest

    Futaba FX-32 Tray version radio with receiver R7008 2.4 GHz FASSTest

    The Top One, Futaba FX-32 Tray version radio with receiver R7008 2.4 GHz FASSTest

    The FX-32 is a fully expanded High-End 18-channel console transmitter with integrated telemetry functions, exploiting 2.4 GHz FASSTest Technology.
    Futaba‘s FASSTest technology ensures outstanding transmission security and a direct, extremely precise sensation of control.
    This, combined with a comprehensive range of functions and the renowned quality of Futaba products makes the FX-32 the perfect transmitter for every demanding model pilot.
    The outstanding features of the transmitter case are its uncluttered design, light weight,and ergonomic arrangement of the controls.
    The large, centrally positioned, high-resolution, backlit 128 x 64 dot graphic screen ensures good legibility in all light conditions.
    The graphic user interface, with the renowned, simple Futaba menu structure, makes the unit very simple to operate. The menu structure can be displayed in any of 7 languages.
    The uncluttered design of the system is made possible by the new Cap-Touch system: zero-contact sensors form a 3D hot-key, and allow a smooth,sealed surface devoid of projecting controls.
    Experience the new sensation of control using the special precision dual-axis stick units, with digital trims and trim value memory. The side-mounted rotary controls provide a practical means of operating auxiliary functions without taking your fingers from the sticks.

    Highlights

    • FASSTest 2.4 GHz technology
    • Superior interference rejection through a combination of the advantages of the DSSS and FHSS modulation
    • Future-proof (already fulfils the new EU norm)
    • 32-channel telemetry system
    • Up to 1000 m telemetry range
    • Real-time display on the large integral screen
    • Speech output, melody and sound output, vibration alarm
    • Data recording of control signals and telemetry data
    • Large, 94 x 35 mm backlit screen (255 x 96)
    • S.BUS technology for fully digital inclusion of S.BUS servos, S.BUS speed controllers and S.BUS sensors
    • Fully expanded 18-channel transmitter with 20 freely programmable control elements
    • Precision stick units with Open-Stick mechanism and 12-bit resolution
    • zero backlash
    • quadruple ballraces

    Specification:

    • Functions 18 / 36 servos
    • Frequency band 2.4 ... 2.4835 GHz
    • Transmitter power 90 mW
    • Transmission system FASSTest 16+2 channels
    • FASSTest 12 channels
    • FASST Multi 16+2 channels, FASST 7-channel
    • S-FHSS 8-channel
    • Channel spacing 2048 kHz
    • Power supply 2S LiPo battery, 3400 mAh
    • Current drain 350 mA
    • Dimensions 205 x 220 x 55 mm
    • Weight approx. 1035 g
    • Compatible with all S-FHSS, FASST / RASST ,FASSTest
    • Included: R7008SB 2.4 GHz FASSTest receiver

    Package including:

    • Fx 32 transmitter
    • R7008SB receiver
    • Long sticks
    • Charger
    • Metal carry case
    • Misc accessories
    SKU: FX32EU
    €999.00
    inc. VAT

  • Futaba FX22+R7008SB 2,4 GHz FASSTest Tray Radio

    Futaba FX22+R7008SB 2,4 GHz FASSTest Tray Radio

    Futaba FX22+R7008SB 2,4 GHz FASSTest is coming back!

    Fully expanded 14-channel console transmitter with high-class performance and integral telemetry function.
    The FASSTest® transmission technology of the robbe Futaba FX-22 guarantees superior transmission security and a direct, ultra-precise sensation of control.
    Combine all this with a comprehensive array of functions which leaves little to chance, and the usual high Futaba quality, and the FX-22 is the perfect console transmitter for all demanding pilots.
    The popular, proven and robust transmitter case of the FX transmitter range provides carefully arranged controls for ease of access and optimum ergonomics The large,
    centrally positioned, high-resolution, backlit 128 x 64 dot graphic screen ensures good legibility in all light conditions. The graphic user interface, with the renowned simple
    Futaba menu structure, makes the unit very simple to operate.
    The menu system can be displayed in any of nine languages.
    The Cap-Touch system is intuitive in operation, providing fast and simple navigation through the menu structure and rapid adjustment of all parameters.
    Experience the sensation of fine, accurate control using the special precision dual-axis stick units, with digital trims and trim value memory.
    Centrally positioned linear sliders and rotary knobs with unre-stricted function assignment ensure ease of access to auxiliary functions for easy operation.

    Highlights:

    FASSTest® 2.4 GHz technology Combined advantages of DSSS and FHSS modulation for superior

    • interference rejection
    • Future-proof (already satisfies the new EU norm)
    • Integral 32-channel telemetry system
    • Telemetry range up to 1000 m
    • Real-time telemetry display on large screen
    • Speech out put via optional earphone with 3.5 mm barrel connector
    • Melody and sound output (via internalbeeper or optional earphone)
    • Vibration alarm
    • Data recording of control signals and telemetry data in preparation
    • Large 74 x 38.5 mm backlit screen (128 x 64 dots)
    • S-BUS technology for fully digital incorporation of S.BUS servos, S.BUS speed
    • controllers and S.BUS sensors
    • Fully expanded fourteen-channel transmitter with 20 (22) freely programmable controls
    • Accurate primary sticks with open-stick mechanisms and 12-bit resolution,
    • zero-slop, twin ballraces
    • Switchable transmission: FASSTest®
    • FASST and S-FHSS for compatibility with all Futaba systems
    • Transmission 14 channels FASSTest® technology (Futaba Advanced Spread Spectrum technology)
    • Special hybrid technology combines the advantages of DSSS and FHSS modulation.
    • Extreme channel spread (spread factor 11) through DSSS spreading combined with optimised FHSS
    • frequency hopping produces superior interference rejection and ultra-fast response for a
    • direct, precise sensation of control.
    • 100 mW transmitter output
    • Real-Time-Response. The latency (delay between moving the stick and the servo’sinitial movement) of the FASSTest® / FASST system is significantly faster than other 2.4 GHz systems.
    • Very long range >3000m
    • Ultra-fast, direct, fully digital modulation for extremely direct response
    • Switchable FASSTest®
    • High-Speed mode for ultra-fast digital servo response and 6.3 ms frame rate (12-channel, reduced
    • telemetry functions)
    • Easy Link - ultra-simple, fast binding procedure between transmitter and receiver

    Specification:

    • Functions 14 / 32
    • Frequency band 2.4 ... 2.4835 GHz
    • Transmitter power 100 mW
    • Transmission system
    • FASSTest® 14 channels
    • FASSTest® 12 channels
    • FASST Multi 12+2 channels
    • FASST 7-channel
    • S-FHSS 8-channel
    • Power supply 2S LiPo 3400 mAh / 7.4 Volt
    • Current drain appro x. 220 mA
    • Dimensions 205 x 220 x 55 mm
    • Weight approx. 890 g
    • Compatible with all S-FHSS, FASST / FASST and FASSTest® model aircraft receivers.
    • R7008SB 2.4 GHz FASSTest® receiver
    • Frequency band 2.4 – 2.4835 GHz
    • Spot frequencies 36 Channel count 18 Channel spacing
    • 2048 kHz Transmission system FASSTest®
    • Voltage 3.7...7.4 Volt (4-5 Nx, 2 LiFe, 1-2 LiPo)
    • Current 50 mA
    • Dimensions 47 x 25 x 14.3 mm
    • Aerial length 14 cm
    • Weight approx. 11 g

    Set contents

    • 1 FX-22 FASSTest® transmitter
    • 1 R7008SB FASSTest® receiver
    • 1 2S LiPo transmitter battery, 3400 mAh
    • 1 12 V Lithium battery charger (2 A)
    • 1 230 Volt mains PSU for charging from the mains
    • 1 Switch harness
    • 1 Screwdriver
    SKU: FX22EU
    €749.00
    inc. VAT

     72HR STOCK
  • Futaba Robbe 14SG+R7008SB Radio set

    Futaba Robbe 14SG+R7008SB Radio set

    Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology.

    It's also compatible with FutabaFASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.

    The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more.
    Heli pilots will prefer the 14SG's 3-axis gyro support — which makes the 14SG the perfect system for flybarless flight!

    The innovations don't stop there. Turn the 14SG over, and you'll see the construction is as rock-solid as any other Futaba system.
    It's also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue — an added bonus that pilots will appreciate.

    About the 14SG:

    • Channels: 12 proportional, 2 switched
    • Compatible with FASSTest, FASST and S-FHSS protocols
    • FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
    • Free user-updatable software
    • 30-model memory
    • 10-character user naming
    • 10-character model naming
    • Airplane, helicopter and glider programming
    • Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
    • SensorTouch™ programming
    • SD Card compatibility for external model memory and software updates (SD: 32MB-2GB; SDHC 4GB-32GB)
    • Left and right assignable slider switches
    • Two assignable rotary knobs
    • Six assignable three-position switches
    • One assignable momentary two-position switch
    • One assignable two-position switch
    • Comfortable rubber grips on the sides and back
    • Wide top switch spacing
    • Adjustable stick tension
    • Dual ball bearing gimbals
    • 4 vibration warning types
    • Home/Exit; User Menu/Servo Monitor buttons
    • Audio earphone jack (for telemetry alarms)
    • User stick calibration
    • Trainer system
    • Servo speed adjust
    • 5 programmable mixes
    • V-tail, Alivator, winglet, motor mixing
    • Trim mix
    • Logic switch (condition switch only)
    • Internal programmer for S.Bus servos
    • User menu
    • Servo monitor (neutral and moving tests)
    • 2 count up/countdown timers
    • Integral timer
    • Model timer
    • Quick model select
    SKU: RBF8075
    €499.00
    inc. VAT

     72HR STOCK
  • Futaba Skysport T4YF 2,4 GHz FHSS

    Futaba Skysport T4YF 2,4 GHz FHSS

    4-channel-manual-transmitter on 2.4 GHz Frequency Hopping Technology (FHSS), for controlling model aircraft, boats and cars.
    No crystals, no frequency selection, and highest protection against same-channel interference. With Spread Spectrum-Modulation, Frequency-Hopping as well as Tx to Rx binding, it is practically interference free.

    Handy 4-Channel transmitter for controlling models with up to 4 channels. For flying delta-wing or wing-only models (Sportwing, Miniwing, etc.) this transmitter has a built-in mixer.
    • Integrated teacher-pupil-system, ideal as pupil transmitter.

    • The L/S connector can be used to attach all standard flight simulators.

    • External servo-reverse switch
    • The power supply is from 4 Mignon cells, with built-in recharger,
    • through which it is eary to recharge the transmitter battery.
    • Range: approx. 1000 m

    Delivered with RX R2004G

    Dimensions: 180 x 160 x 50 mm
    Weight: 595 g
    Frequency band: 2400.00
    Channel spacing: 1500 kHz
    Spotfrequencies: 30.00
    Current drain: 77 mA
    Power Supply: 4,8 Volt (4NC/NiMH)
    Transmission system: FHSS
    Functions: 4
    SKU: F4074
    €120.00
    inc. VAT

     72HR STOCK
  • Futaba T-14MZ transmitter only

    Futaba T-14MZ transmitter only

    Transmitter MZ-14, without RF module and Tx antenna

    Included

    1 Fut 14MZ transmitter, fully expanded to fourteen channels
    1 Lithium Tx battery, 7.4 V / 2200 mAh.
    1 230 V Lithium battery charger (1,5 A)
    1 Aluminium transport case
    1 4,8V, 1400 mAh NiMH Rx pack
    1 Neckstrap
    1 DSC lead
    1 DP card, 128 MB
    1 Combination tool / writing stylus
    1 Cleaning cloth
    1 switch harness with charge socket
    2 Servo extension leads (20 cm)

    SKU: RobbeF8063
    €1720.00
    inc. VAT

     72HR STOCK
  • Futaba T10J with receiver R3008SB 2,4 GHz T-FHSS radio

    Futaba T10J with receiver R3008SB 2,4 GHz T-FHSS radio

    Fully Equipped 10 - channel handheld transmitter with integrated telemetry function in 2.4GHz FHSS - T  frequency - hopping technology .
    The ideal plant for advanced control of the airplane , helicopter and Multicopter - models , place value on a precise feeling of control .
    The T10J allows with your extremely rich features also demanding applications and leaves nothing in terms program-ability almost nothing to be desired. The ergonomically designed transmitter case with known Futaba build quality feels good in the hand and is characterized by conveniently arranged controls .
    A 128 x 64 pixels large, back-lit LCD display , with large pixels for better legibility in all light conditions .
    The graphically -driven user interface , with the known simple Futaba menu structure makes for easy operation - the menu system can be chosen in 7 languages. The intuitive 3D hot-key allows quick and easy navigation through the menu structure and easy adjustment of all parameters.

    Highlights

    • T- FHSS 2.4GHz technology
    • High interference by rapid frequency hopping modulation (100 times per second . )
    • Future-proof (equivalent already the new EU standard of 2015)
    • Integrated 32- channel telemetry system with high range
    • Telemetry real-time display on a large screen
    • Voice output through optional headphones with 3.5 mm jack
    • Melody and sound output ( either via internal beeper or optional headphones)
    • Vibration Alarm system
    • 65 x 34 mm large, back-lit display (128 x 64 dot)
    • S- BUS technology for full digital integration of S.BUS servos , S.BUS controllers and sensors S.BUS
    • By S.BUS support ideal for helicopter with flybarless systems S.BUS
    • Integrated patch antenna for always optimal antenna radiation
    • Fully equipped 10 - channel transmitter with 19 controls
    • Precision , backlash-free stick with open- stick mechanism
    • The stick units for universal mode (Mode 1 and 2) can be user- Changed .
    • Supplied with heavy NiMH battery for 10 hours of operation , and charger.

    Included:

    1 transmitter T10J 2.4 GHz T / S-FHSS
    1 receiver R3008SB 2.4GHz FHSS-T
    1 Transmitter battery 2000 mAh 5NiMH
    1 socket charger Tx-Rx 150 mA
    1 Switch harness with charge socket
    1 User Manual

    Other Features:

    1. 10 (8 +2) channels
    2. Switching from T- FHSS (10 channels ) to S- FHSS (8 Kan) - modulation.
    3. T- FHSS Frequency Hopping technology with integrated telemetry
    4. A broad channel spread results in high noise immunity and ultra-fast response times for precise , direct control feel .
    5. FEC technique that T- FHSS  receiver scan the input signal continuously and apply an intelligent error correction method to
    6. 100mW transmit power
    7. No reaction speed loss even with heavily occupied frequency band
    8. Real - time response - real-time control
    9. Excellent range
    10. Ultra-fast , direct, continuous digital modulation for the shortest response times
    11. EasyLink - extremely simple , fast binding process between sender and receiver
    12. Fast and reliable automatic re- binding , even under difficult conditions
    13. Intelligent Servo Timing for uniform servo control and prevention of servo delay differences
    14. Dual Antenna Diversity - extremely fast switching between two receiving antennas for optimal reception signal quality (depending on receiver)
    15. Integrated range check function to check the reach before the start
    SKU: F4109
    €329.00
    inc. VAT

     LOW STOCK
  • FUTABA T16SZ 2.4GHz Radio Multimode + R7008SB Receiver

    FUTABA T16SZ 2.4GHz Radio Multimode + R7008SB Receiver

    Professional 16-channel 2.4 GHz remote control system with telemetry and 4.3 inch large color touch screen.
    The T16SZ is a fully-featured 16-channel transmitter that omits nothing in terms of transmission reliability, quality, function and usability.

    The transmitter has all known modulations such as T-FHSS, FASSTest, FASST and S-FHSS.
    The menu control of the transmitter software is clearly structured and can be operated intuitively via the large colored touch screen.
    Besides the special multicopter menu, the T16SZ has a 9-language menu navigation.
    The integrated SD card slot is there for storing the model data and software updates, new applications makes this remote control system future-proof.

    Product Features:

    • Professional 16-channel remote control system with FASSTest & T-FHSS 2.4 GHz technology
    • Model selection, internal memory for 30 models, expandable via SD card
    • Model / User Name up to 15 characters
    • Modulation selectable FAST, FASSTEST, S-FHSS, T-FHSS
    • Stickmode 1-4 can be changed by user, you can choose Mode 1 or 2
    • 9-language navigation menu
    • Color touch screen 4.3 inches 480x272 pixels
    • Telemetry with voice output via loudspeaker, optionally headphone
    • 16 control elements: 6 trimmers, 8 switches, 2 rotary encoders, all freely assignable
    • Power supply via FT2F2100B LiFe battery (2100mAh)
    • Graphical servomonitor for displaying all servo travels with servo test function
    • Future-proof by updating via SD card
    • Comprehensive timers and calendar functions
    • Vibration alarm
    • S.Bus port with PowerSupport, for programming and logging S.Bus products
    • 8 flight conditions per model memory can be combined with Logic function
    • 10 free programmers
    • AFR 3 modes, up to 17 points
    • 13 wing types, 3 control units, 8 wobble disc types available
    • Fully equipped helicopter menu with swash ring, governor, servo travel and speed compensation, gas limiter
    • 3 curve modes for gas / pitch, up to 17 points possible
    • Fully equipped sailplane with 13 wing types, 3 tailpipes
    • Comprehensive mixer selection for sailors and engine models
    • Freely configurable teacher / student channel assignment, single or mixed operation

    Specifications:

    • Channels: 16
    • Transmission system: FASSTest, FASST, T-FHSS, S-FHSS
    • Frequency band: 2.4 GHz
    • RF Power Output: 100mW EIRP
    • Voltage range: 7.4 V
    • Dimensions: 190x203x72 mm
    • Weight approx.: 1130 g

    Package Includes:

    • Transmitter T16SZ
    • Receiver R7008SB FASSTest
    • Multilingual user manual
    SKU: FUT16SZ-REU
    €759.00
    inc. VAT

     72HR STOCK
    NEW
  • Futaba T18MZ+R7008SB 2,4GHz FASSTest Radio

    Futaba T18MZ+R7008SB 2,4GHz FASSTest Radio

     It’s the first true 18-channel Futaba radio system ever. It comes with an R7000SB receiver, as well as transmitter and receiver batteries.

    The R7008SB is a high-voltage design that lets you use as many — or as few — channels as you want.

    You can operate on up to 8 channels using the 8 standard PWM inputs. Servo options are wide open, ranging from simple analog to SBUS and new S.Bus2 servos.

    You have access to up to 18 channels (16 proportional + 2 digital) through the 18MZ’s two S.Bus2 ports. That means simpler, more foolproof setup and full support for S.Bus servos.

    It features a SD Card slot. Slide a card in the slot, and you have ample (and adjustable) capacity for updates, model memory and more.

    It includes versatile “internal memory”. It’s not just for model/setup data; it can also be used for sound and picture files. That’s especially nice, since the 18MZ has…

    A built-in 0.3M megapixel camera. No need for a digital camera or even a flip phone. Just point the 18MZ, click and you have a foolproof picture ID of your model in seconds.

    It includes a 6” touch screen with 640×240 resolution. Big, brilliant and backlit for easy viewing anywhere, it provides sparkling clarity on remarkably little power. Gentle finger pressure is all that’s needed for fast, easy navigation and programming.

    You can download software updates online. This is a standard feature for Futaba computer systems, and easily one of the most popular customer “perks.” It’s a fast and easy way to keep your system “current”.

    A 7.4V, 3500mAh LiPo transmitter battery is standard equipment.

    It features a built-in U.S.B. Port. You can use it to connect a memory stick or connect it to a keyboard or mouse or use it to download telemetry data to your PC or laptop for storage and reference.

    It includes a Serial Interface, too. Futaba already offers a stand-alone serial interface (the CIU-2) for programming the travel, endpoint and other functions of S.Bus and S.Bus2 servos. This built-in (and the free download) lets you do the same with the 18MZ.

    Stick angle adjusts quickly and easily. First introduced on the 14MZ, the adjustable gimble angles feature has proven so popular that it was included on the 18MZ, as well. It’s more than a comfort/convenience feature; it allows you to customize your control setup for greater ease and precision.

    Inclusive 3 years real warranty from Robbe.

    • S-Bus servos, removing the requirement for a laptop and CIU-2 interface and thus simplifying setups.
    • First introduced on the 14MZ, the adjustable gimbal angles feature has proven so popular that
    • it was included on the 18MZ, as well. It’s more than a comfort/convenience feature; it allows you to
    • customise your control setup for greater ease and precision.
    • The functions outlined here are just the tip of the iceberg - making the Futaba 18MZ a must have
    • for any serious pilot!
    • S-FHSS/FASST/FASSTest Transmission Modes
    • Inbuilt Telemetry System
    • 18 Channels
    • Dedicated 2.4GHz Transmitter
    • Extended Operating Time of at Least 6 Hours
    • Unlimited Model Memories (Using Optional SD Card/s)
    • S-Bus Servo Programming System
    • HVGA Soft-Touch Screen with LED Backlighting
    • Integral Camera
    • Visual and Audible Telemetry Outputs
    • FTR Compatible

    SKU: F8073
    €2599.00
    inc. VAT

     72HR STOCK
  • Futaba T6K 2.4Ghz FHSS/S-FHSS/T-FHSS 6ch S.Bus & R3006SB Receiver

    Futaba T6K 2.4Ghz FHSS/S-FHSS/T-FHSS 6ch S.Bus & R3006SB Receiver

    Futaba T6K 2.4Ghz FHSS/S-FHSS/T-FHSS 6ch S.Bus Transmitter & R3006SB Receiver Combo

    The Futaba 6K has T-FHSS AIR telemetry system. It is a high-performance radio that it has not only Airplane and Helicopter mode but also Multicopter and glider mode. The 6K has a text-to-speech function from audio output connector. So you can make sure of telemetry data safely without take your eyes off from your flying body. It is also equipped with vibrator function to inform you such as voltage drop. The 6K also supports Futaba S-FHSS system receiver. So you can also use R2006GS. *S-FHSS system does not support telemetry function.

    System Features:

    •     15-model memory
    •     Function Voice Telemetry
    •     10-character model naming
    •     Trims: with storage of digital values
    •     Functions: (ATV / EPA) by the end of servo travel adjustment
    •     Stroke Servo: 3 settings and exponential function (EXP)
    •     4 switches / potentiometer 1
    •     Failsafe: adjustable lanes 1-6
    •     Mixes planes and helicopters
    •     T-modulation FHSS / S-FHSS
    •     Stopwatch
    •     Offset neutral
    •     Trainer Mode
    •     Monitor servos
    •     Alarm Adjustable battery under multiple voltages
    •     Audible and vibrating alarms
    •     Port S-BUS
    SKU: FUT-T6K
    €219.00
    inc. VAT

     72HR STOCK
  • Futaba-Spektrum FASST/DSM2/X combined Radio T10CP with extras

    Futaba-Spektrum FASST/DSM2/X combined Radio T10CP with extras

    This is a Futaba T10CP radio transmitter combined with Spektrum module, full range.

    With this radio you can fly all models with Futaba protocol FASST, and Spektrum DSM2/DSMX . Radio converted by professional way, tested perfectly with all models, range test, etc.

    Radio will be delivered with the following

    • TX 10CP with Built in Spektrum DSM2/DSMX Module
    • FUTABA TM-10 fasst module
    • Custom caps in green color, with rubber covered switches
    • 2 x TX original Futaba Robbe packs
    • Transmitter CNC stand
    • Transmitter Robbe- futaba acryl Tray with strap
    SKU: FUT-SPEK-T10
    €335.00
    inc. VAT

     LOW STOCK
  • Graupner MC-20 12-Channel HoTT Radio System Receiver GR-16

    Graupner MC-20 12-Channel HoTT Radio System Receiver GR-16

    Looking for a top-notch tray-type 12-channel system? Look no further than the Graupner mc-20 12-Channel HoTT Radio System! Features include frequency-hopping spread spectrum technology, two receivers, integrated telemetry, two high-contrast 8 line Blue-Lit graphical displays, programming for fixed-wing aircraft and helis, a micro memory card slot, 24 model memories, 10ms cycle times for digital servos and much more.

    GRAUPNER mc-20 HoTT with 12 control functions and a new internal patch aerial enables advanced RC model builders to control nearly any model. The use of HoTT 2.4 GHz transmission technology ensures high functional reliability through bidirectional communication between sender and receiver, with integrated telemetry, voice output via speaker or headphone output, and ultra-fast controller response times.
    The transmitter has a 24-model memory. Programming is done through simplified programming technology with capacitative touch keys. Two high-contrast, 8-line blue-lit graphical displays ensure a perfect display of all parameter settings and telemetry data. It is possible to store telemetry data and expand the model memories on a micro-SD memory card.
    USB connector for readout and storage of model memories and for firmware upgrades.

     Microcomputer remote control system with state-of-the-art 2.4 GHz Graupner HoTT technology
        Patch aerial
        Bidirectional communication between transmitter and receiver
        Wireless L/S function
        6 different languages (German, English, French, Italian, Spanish, and Dutch) possible via software update. For availability of the respective language, see Download area
        Storage of telemetry data with date and time
        Servo cycle times of 10 ms can be selected for digital servos.
        Ultrafast response times through direct transmission of the data from the main processor to the 2.4-GHz transceiver with reliable transmission. No additional delays through detours via a module processor.
        Operation and programming based on the proven concepts of the mx-24
        A contrast-rich, blue-lit graphic display ensures perfect control of settings and parameters such as model type, model memory, clocks, and operating voltage.
        12 control functions
        Free assignment of all switches
        24 model memories«
        10 switches/keys , including 2 3-stage-switches long, 4 2-stage-switches, 2 switches long, 2 switches on the back and 2 sliders and 2 rotary controls on the side
        Mode 1 to 4 freely selectable
        CAP-TOUCH key with key lock function to prevent unintentional operation
        Numerous telemetry, programming, and analysis functions right in the transmitter display
        Voice output can be called up via freely programmable switches
        Extensive programmes for fixed-wing and helicopter models
        Swashplate limiter

    The Set contains:

    • Graupner HoTT mc-20 microcomputer telemetry transmitter
    • LiIo 6000 mAh transmitter battery
    • Graupner HoTT GR-16
    • 500 mA transmitter charger
    • update cable
    • µSD card
    • aluminium case
    • hand rests
    • neck strap
    • short and long joystick
    • transmitter strap (strap: 55% polyester, 45% acrylic, neck pad: 65% polyester, 35% acrylic)

     

    SKU: GR33020.16
    €599.00
    inc. VAT

     72HR STOCK
  • Graupner MZ-18 9Ch 2.4GHz HoTT Radio

    Graupner MZ-18 9Ch 2.4GHz HoTT Radio

    Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Additionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch panel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

    This 9 channel, 30 model memory system is suitable for any aircraft. The MZ-18 uses the latest 3.5” color touch screen, for easy programming and displaying of telemetry data. Compatibility with all optional modules for full telemetry data feedback. With the multi-binding system including Smart Voice Announcement, this is a fantastic system. The MZ-18 is supplied with a 2000mAh battery and charger, USB interface set, GR-24 receiver, manual and even a neck strap.

    9 Channels
    3.5" Color touch screen for easy programming
    Smart voice announcement system
    Real-time telemetry data on screen with voice readout
    Wireless and wired trainer system with individual channel allocation
    2000mAH Li-Po battery and charger included

    Combo Content

    • MZ-18 Transmitter
    • 2000Mah Ni-MH Transmitter Battery
    • Mains Charger
    • GR-24 Receiver
    • Neck Strap
    • PC Interface Cable
    SKU: GR-S1005EN
    €399.00
    inc. VAT

     72HR STOCK
  • Graupner MZ-24 12Ch 2.4GHz HoTT Radio

    Graupner MZ-24 12Ch 2.4GHz HoTT Radio

    The Graupner/SJ MZ-24 puts the HOT in HOTT, leading the way in radio control technology. A beautifully styled radio with a 3.5" user friendly, touch-screen colour display. Fully equipped with a 30 model memory, smart voice announcement, multi-binding system, and advanced HolTT wired or wireless trainer system. With Real Time Data Analysis (with optional sensors), the MZ-24 is a radio you will be proud to own. A 12-channel receiver is included along with a good quality transmitter case.

    Features of the Graupner/SJ MZ-24 transmitter at a glance: -
    12 Channels
    3.5" colour touch-screen for easy programming
    Smart voice announcement system
    Real-time telemetry data on screen with voice readout
    Wireless and wired trainer system with individual channel allocation
    4000mAh Li-Po battery and charger included

    Combo Content

    • MZ-24 Transmitter
    • 4000Mah Ni-MH Transmitter Battery
    • Mains Charger
    • GR-24L Receiver
    • 4GB SD Card
    • Neck Strap
    • Transmitter Balancer
    • PC Interface Cable
    • Aluminium Transmitter Case
    SKU: GR-S1006EN
    €429.00
    inc. VAT

     72HR STOCK
  • Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3

    Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

    Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-NR-M1
    €1149.00
    inc. VAT

     72HR STOCK

Manufacturers

Back