New Arrivals

  • Aluminium Side Case SR Black Matte For Goblin Comet

    Aluminium Side Case SR Black Matte For Goblin Comet

    Description:

    Includes:

    • 1 x Side Case SR

    Used For:

    • Goblin Comet
    SKU: H0604BM-S
    €42.00
    inc. VAT

    NEW
  • Aluminium Main Support Black Matte For Goblin Comet

    Aluminium Main Support Black Matte For Goblin Comet

    Description:

    Includes:

    • 1x Main Support

    Used For:

    • Goblin Comet
    SKU: H0606BM-S
    €52.00
    inc. VAT

    NEW
  • Gens ace 5000mAh 11.1V 50C 3S1P Lipo with Original TRX Connector

    Gens ace 5000mAh 11.1V 50C 3S1P Lipo with Original TRX Connector

    Gens ace 5000mAh 11.1V 50C 3S1P Lipo with Original TRX Connector

    The Gens ace 5000mAh 50C 11.1V LiPo battery provide all the wild power you need for your rc cars,just the perfect size,idea weight,help you win all the attention in the rc track. The 50C true rate gives you enough power for acceleration, it is all about the speed.

    These batteries packs are made with superior Lithium Polymer raw materials from Japan and Korea. The advanced stacking technology enables a single cell of capacity to reach 5000mAh. They are widely fit most of the traxxas  car Models

    The 5000mah 11.1v lipo battery provides your batteries very solid protection.
     
    Specifications:

    • Net Weight (g)     374
    • Brand     Gens ace
    • Capacity 5000 mAh
    • Discharge Rate (C) 50
    • Max Cont Current (A) 250
    • Max Burst Current (A) 500
    • Max Burst discharge Rate (C) 100
    • Parallel (P)     1
    • Voltage     3S (11.1V)
    • Length (mm)     134
    • Width (mm)     40
    • Thickness(mm)     21
    • Wire Gauge     12#
    • Wire Length (C/D)     120mm / 150mm
    • Connector Type     TRAXXAS
    • Balancer Connector Type    JST-XHR

    Gens ace lipo 5000mAh 3S1P 50C battery Suited to rc models,Slash VXL, Slash 4x4 VXL, E-Maxx Brushless, E-Revo Brushless and Spartan models

    SKU: B-50C-5000-3S1P-TRX
    €63.90
    inc. VAT

     LOW STOCK
    NEW
  • ALuminium Top Plate SR Black Matte For Goblin Comet

    ALuminium Top Plate SR Black Matte For Goblin Comet

    Description:

    Includes:

    • 1 x Top Plate SR

    Used For:

    • Goblin Comet
    SKU: H0607BM-S
    €42.00
    inc. VAT

    NEW
  • ESC Support For Goblin Comet

    ESC Support For Goblin Comet

    Description:

    Includes:

    • 1 x ESC Support.
    • 1 x ESC Plate.
    • 2 x Socket Head Cap Screw M3x10mm.
    • 2 x Finishing Washer M3.

    Used For:

    • Goblin Comet

     

    SKU: H0610-S
    €9.00
    inc. VAT

    NEW
  • Aluminium Battery Support Black Matte For Goblin Comet

    Aluminium Battery Support Black Matte For Goblin Comet

    Description:

    Includes:

    • 1 x Battery Support.
    • 1 x Frame Battery Support.
    • 1 x Battery Plate.
    • 1 x Socket Head Cap Screws M3x12mm.
    • 2 x Socket Head Cap Screws M4x10mm.
    • 2 x Flat Head Cap Screws M3x5mm.
    • 2 x Washer 3.2x 6x0.5.
    • 1 x Battery Reload Arm
    • 1 x Finshing Washer M3
    • 1 x Socket Head Cap Screw M3x8
    • 1 x Center Support.

    Used For:

    • Goblin Comet
    SKU: H0733-S
    €32.00
    inc. VAT

    NEW
  • ALuminium Motor Mount For Goblin Comet

    ALuminium Motor Mount For Goblin Comet

    Description:

    Includes:

    • 1 x Motor Mount.
    • 2 x Springs de 5.8/ df0.5 / LL9.
    • 2 x Washer 5.3x 15x1mm.
    • 2 x Metric Hex Nylon Nut M5.
    • 2 x Set Screw M5x20mm.
    • 1 x Motor Mount.

    Used For:

    • Goblin Comet
    SKU: H0735-S
    €36.00
    inc. VAT

    NEW
  • Aluminium Battery Stop For Goblin Comet

    Aluminium Battery Stop For Goblin Comet

    Description:

    Includes:

    • 1pc x Tail Side Plate Left
    • 1pc x Tail Side Plate Right
    • 1pc x Tail Case Spacer
    • 2pcs x Flanged Bearing 6 x 13 x 5mm

    Used For:

    • Goblin Comet
    SKU: H0736-S
    €11.00
    inc. VAT

    NEW
  • FBL And RX Support For Goblin Comet

    FBL And RX Support For Goblin Comet

    Description:

    Includes:

    • 1 x FBL Support.
    • 1 x RX Support.
    • 2 x Column.
    • 2 x Finishing Washer M3.
    • 2 x Head Cap Screw Shouldered M3x30mm.

    Used For:

    • Goblin Comet
    SKU: H0754-S
    €19.00
    inc. VAT

    NEW
  • SAB Goblin Canopy Comet Yellow / Red

    SAB Goblin Canopy Comet Yellow / Red

    Description:

    Includes:

    • 1 x Canopy Comet Yellow/Red

    Used For:

    • Goblin Comet
    SKU: H0879-S
    €156.00
    inc. VAT

     72HR STOCK
    NEW
  • SAB Goblin Canopy Rubber Band

    SAB Goblin Canopy Rubber Band

    Description:

    Includes:

    • 3pcs x Canopy Rubber Band 85-12-1.3mm (Black)
    • 3pcs x Canopy Silicone Band 70-04-0.4mm (Transparent)

    Used For:

    • Goblin Kit
    SKU: HA060-S
    €6.00
    inc. VAT

    NEW
  • Aluminium Side Case SL Black Matte For Goblin Comet

    Aluminium Side Case SL Black Matte For Goblin Comet

    Description:

    Includes:

    • 1 x Side Case SL

    Used for:

    • Goblin Comet

     

    SKU: H0605BM-S
    €42.00
    inc. VAT

    NEW
  • SAB Goblin Comet Retractable Landing Gear

    SAB Goblin Comet Retractable Landing Gear

    Description:

    This kit was designed to replace the standard landing gear contained in Goblin Comet Kit.

    Any standard landing gear acts like an airborne brake.

    To get the best performance, the landing gear must retract into the fuselage.

    This kit uses an electric motor that powers the landing gear allowing full retract.....

    The device functions just like a servo.

    You will need to use a receiver channel and combine it with an on-off switch powered directly from the receiver channel (7.4V).

    With a 0-100 signal, you can control the extension and retraction of the landing gear.

    Includes:

    • 1 x Main module set.
    • 1 x Electric Unit.
    • 1 x Retract Landing Gear Red.
    • 2 x Socket Head Cap Screw M3x8.
    • 4 x Flat Head Cap Screw M3x8.

    Used for:

    • Goblin Comet
    SKU: H0742-K
    €196.00
    inc. VAT

     72HR STOCK
    NEW
  • SAB Goblin Ball Bearing 12 x 28 x 7

    SAB Goblin Ball Bearing 12 x 28 x 7

    Description:

    Includes:

    • ABEC-5 Ball Bearing 12 x 28 x 7mm (16001zz) - 2pcs
    SKU: HC480-S
    €19.00
    inc. VAT

    NEW
  • SAB Goblin Flat Head Cap Screw M3 X 10mm

    SAB Goblin Flat Head Cap Screw M3 X 10mm

    Description:

    Includes:

    • Flat Head Cap Screw M3x10mm - 8pcs
    SKU: HC135-S
    €5.00
    inc. VAT

    NEW
  • SAB Goblin Main Blade 280mm

    SAB Goblin Main Blade 280mm

    Description:

    Includes:

    • 1set TB Main Blade (Length 280mm)

    Used for:

    • Goblin Fireball
    • Goblin Mini Comet
    SKU: 280TB
    €29.00
    inc. VAT

    NEW
  • SAB Goblin Spacer 4 x 6.9 x 0.4mm

    SAB Goblin Spacer 4 x 6.9 x 0.4mm

    Description:

    Includes:

    • 2x Spacer 4 x 6.9 x 0.4mm

    Use for:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0219-S
    €3.80
    inc. VAT

    NEW
  • SAB Goblin Washer 2.5 x 4.5 x 0.5mm

    SAB Goblin Washer 2.5 x 4.5 x 0.5mm

    Description:

    Includes:

    • 10 x Washer 2,5 x 4,5 x 0,5

    Use for:

    • Goblin Fireball
    SKU: H0566-S
    €4.00
    inc. VAT

    NEW
  • SAB Goblin Tail Hub

    SAB Goblin Tail Hub

    Description:

    Includes:

    • 1x Tail Hub
    • 2x Washer 2,1 x 4,5 x 0,5
    • 2x Socket Head Cap M2x5
    • 1x Set Screw M3 x 4mm

    Use for:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0771-S
    €8.80
    inc. VAT

    NEW
  • SAB Goblin Tail Pitch Slider

    SAB Goblin Tail Pitch Slider

    Description:

    Includes:

    • 1x Pitch Slider 03
    • 1x Pitch Slider 01
    • 1x Pitch Slider 02
    • 2x Flanged Bearing 4 x 7 x 2.5mm (MF74ZZ)

    Use for:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0775-S
    €9.80
    inc. VAT

    NEW
  • SAB Goblin Tail Rotor Arm

    SAB Goblin Tail Rotor Arm

    Description:

    Includes:

    • 2x Tail Arm
    • 2x Grip Link Bush

    Use for:

    • Goblin Fireball
    SKU: H0777-S
    €5.00
    inc. VAT

    NEW
  • SAB Goblin Bell Crank Support

    SAB Goblin Bell Crank Support

    Description:

    Includes:

    • 1x Bell Crank Support
    • 4x Socket Screw 1,6 x 5mm

    Use for:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0778-S
    €6.80
    inc. VAT

    NEW
  • SAB Goblin Plastic Ball 4mm

    SAB Goblin Plastic Ball 4mm

    Description:

    Includes:

    • 5x Uniball Arm

    Use for:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0779-S
    €5.00
    inc. VAT

    NEW
  • SAB Goblin Tail Side Plate

    SAB Goblin Tail Side Plate

    Description:

    Includes:

    • 1x Tail Plate
    • 1x Flanged Bearing 3 x 8 x 3mm (MF83ZZ)

    Use For:

    • Goblin Fireball
    • Goblin MiniComet
    SKU: H0780-S
    €7.80
    inc. VAT

    NEW

Manufacturers