Video TX & RX

Video TX & RX

All related to FPV, video transmission, Antennas and more

Products


  • 5,8 GHz 12dBi AV/RX Directional Antenna

    5,8 GHz 12dBi AV/RX Directional Antenna

    This 5.8 ghz high gain patch antenna (12dBi) has a substantially higher range than the stock omni whip antenna.

    • Its light weight is perfect for a pan and tilt antenna or antenna tracker unit
    • Only measures 8 1/2 inches square (8 inches each side)
    • Low loss solid brass elements
    • 3 foot coax lead with SMA Male connector
    • Can be mounted for vertical or horizontal polarization
    • You can use this antenna with any of our 5.8 ghz Receivers here
    SKU: IMRC12DBI
    €89.99
    inc. VAT

     72HR STOCK
  • 5,8 GHz ImmersionRC 25mW A/V transmitter

    5,8 GHz ImmersionRC 25mW A/V transmitter

    Small size High Quality 5,8 GHz Immersion RC 25 mW A/V transmitter

    With all 2,4 GHz RC Radios like FASST, Spektrum, Jeti Duplex compatible !

    Datasheet:

    • Transmission power: 25mW
    • Channels: 7(5740,5760,5780,5800,5820,5840,5860 MHz)
    • Stereo Sound: 2x line IN
    • Supply Voltage: 7-25 V DC
    • Size: 80x35x10mm
    • Weight: 29g (incl. Antenna)

    The Transmitter comes witch: a 5,8 GHz 2,5dBi Antenna, cabling type is selectable and a BEC Plug
    This product is CE certified, and conform with EU rules.

    SKU: IMRC25MWAV
    €69.90
    inc. VAT

     72HR STOCK
  • 5,8 GHz ImmersionRC UNO5800 V2 A/V receiver

    5,8 GHz ImmersionRC UNO5800 V2 A/V receiver

    Small High Quality A/V-Receiver.

    With all 2,4 GHz RC Radios like FASST, Spektrum, Jeti Duplex compatible !

    Datasheet:

    • Sensitivity: up to -90dBm
    • Channels: 7(5740,5760,5780,5800,5820,5840,5860 MHz)
    • Videooutputs: 2x 3,5mm Jack
    • Supply Voltage: 6-13 V DC
    • Size: 85x75x25mm
    • Weight: 130g (incl. Antenna)


    The Receiver comes with: 1x  A/V-Chinch-cable, 1x Antennas, 1x Powercable

    SKU: IMRCAVRX
    €74.99
    inc. VAT

     72HR STOCK
  • 5.8G 32CH Wireless RF Power Adjustable AV Transmitter

    5.8G 32CH Wireless RF Power Adjustable AV Transmitter

    5.8G 32CH Wireless RF Power Adjustable AV Transmitter,
    When you fly in POWER restricted countries, you can use as low output as 25mw, and allow to change the power when flying abroad or in Non restricted countries:
    ( Please check always the local regulations for maximum allowed transmission power ), we sell this product for use Out of Belgium

    LCD display,frequency and channel asynchronous display.
    RF power output 8 step adjustable(25/50/100/200/400/500/600/800mW)
    Large input voltage range

    Specification:
     

    • Transmitting Frequency:ISM 5.6GHz-5.95GHz 32CH
    • Operating Voltage: +6.0V~+25.0V
    • Supply Current: 450mA/800mW/12V
    • Video Input Level: 1V±0.2Vp-p/75Ω
    • Audio Input Level: 0.5~2.0Vp-p/10KΩ
    • TV System: PAL/NTSC/SECAM(AUTO)
    • RF Output Power: 8 step adjustable(25/50/100/200/400/500/600/800mW)
    • Antenna Connector: SMA Connector
    • Operating Temperature: -10℃~+85℃
    • Weight:35g
    • Dimensions(L x W x H):50 x 37 x 17mm
    • Cable to Go -pro included.
    SKU: FT956
    €99.00
    inc. VAT

     IN STOCK
  • 5.8G FPV DIPOLE Mini whip unbreakable 2.8 DBI  TX/RX Racing Antenna

    5.8G FPV DIPOLE Mini whip unbreakable 2.8 DBI TX/RX Racing Antenna

    5.8G FPV DIPOLE Mini whip unbreakable 2.8 DBI  TX/RX Racing Antenna

    This super strong antenna is not easy to break!

    Specifications:

    • Connector type: SMA
    • Stopping wave ratio: 1.22-1.51
    • Transmitting efficiency: About 95%
    • Gain: 3.5db
    • Lenght: 73 mm
    • Weight: 6.8g
    SKU: AT001
    €10.00
    inc. VAT

     IN STOCK
  • 5.8G Receiver Helical Antenna with protective case SMA

    5.8G Receiver Helical Antenna with protective case SMA

    5.8G Helical Antenna (Right) for Receiver SMA

    Helical Antenna 12dBi, 5.8GHz, Right hand circular polarization, SMA connector.
    The circular polarization directional antenna, high gain, ideal for use in the video receiver when intending long ranges. The antennas are right hand circular polarization. Supplied with SMA connector and including a coaxial cable with SMA or PR-SMA (see spc).
     
    Specification:
     

    • Frequency: 5.8G
    • Sliver plated line and 24K golden interface
    • Used for receiver, with three-blade antenna on Tx.
    • Suit for video receiver
    • Right Hand Circular Polarization
    • Interface: Please check pictures (please note the connector type you need when place an order) 

    Package:
     

    • 5.8G Helical Antenna x 1
    • 15cm coaxial cable x 1

     

    SKU: RHA5.8G
    €9.90 €15.90
    inc. VAT

     IN STOCK
  • 5.8GHz 11dBi High-gain Panel patch Antenna For FPV System

    5.8GHz 11dBi High-gain Panel patch Antenna For FPV System

    Compact Panel Antenna - Extended Goggle Mounted Range

    Designed to be mounted to FPV / goggle systems, this highly compact panel antenna adds excellent directional FPV range that will outperform similar omnidirectional antennas with ease.

    With this directional antenna mounted to your goggle system, all you need to do is turn your head to direct this extended range capability in a whole new direction, allowing you to direct your range anywhere you look.

    Designed for 5.8GHz systems with an 11dBi gain, this directional panel antenna allows extended range that opens up your FPV flight envelope, allowing you to explore new levels of extended flight without video drop out that omnidirectional antennas suffer at longer ranges.

    Features:
     

    • Compact  Mount Design
    • Extended Directional Range
    • Light Weight & Functional Design
    • Gain: 11dBi
    • Frequency: 5.8GHz
    SKU: SKU48887
    €9.90 €15.00
    inc. VAT

     IN STOCK
  • 5.8GHz Spiro Circular Polarized Antenna Set SMA

    5.8GHz Spiro Circular Polarized Antenna Set SMA

    Hot of the press, literally, the Circularly Polarized SpiroNet antennas are without doubt the best replacement available for your stock whip antennas. Manufactured to extremely high tolerances and 100% tested on a Rhode & Schwartz analyzer, these antennas yield unparalleled results when compared to hand made variants or DIY antennas.

    Left-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Antennas include standard SMA connector. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance. 

    Specifications:

    • Clover (TX) weight: 7.7g
    • Skew (RX) Weight: 8.6g
    • Connector: SMA 
    • Case size: 33.5m(w) 16mm(h)
    • Cable Length: 73mm(skew) 33.5mm(clover)

     

    SKU: Spiro58D
    €18.00 €22.00
    inc. VAT

     IN STOCK
  • Aluminium Heatsink Heat Sink Cooling Cooler Fin 20x14x6mm VTX, ESC

    Aluminium Heatsink Heat Sink Cooling Cooler Fin 20x14x6mm VTX, ESC

    This is a special Heat Sink to cool down your VTX or ESC.
    Reduce the temprature to keep your component safe.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it directly over the electronic components since it might shortcut

    Material : Aluminum
    Sizes 20 x 14 x 6mm
    Weight: 2.3 gr
    1 pcs included in package

    SKU: HS20146
    €3.20
    inc. VAT

     IN STOCK
  • Aluminium Heatsink Heat Sink Cooling Cooler Fin 25x24x16mm  VTX, ESC

    Aluminium Heatsink Heat Sink Cooling Cooler Fin 25x24x16mm VTX, ESC

    This is a special Heat Sink to cool down your VTX or ESC.
    Reduce the temprature to keep your component safe.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it directly over the electronic components since it might shortcut

    Material : Aluminum
    Sizes 24x25mm
    Weight: 5.2gr
    1 pcs included in package

    SKU: HS252416
    €3.60
    inc. VAT

     IN STOCK
  • Aluminum Heatsink For Video transmitter VTX 11x10x6mm

    Aluminum Heatsink For Video transmitter VTX 11x10x6mm

    This is a special Heat Sink to cool down your VTX.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it over the electronic components since it might shortcut

    Material : Aluminum
    Size 11x10x6mm
    Weight: 1gr
    1 pcs included in package

    SKU: HS11106
    €3.00
    inc. VAT

     IN STOCK
  • Aluminum Heatsink For Video transmitter VTX 14x14x6mm

    Aluminum Heatsink For Video transmitter VTX 14x14x6mm

    This is a special Heat Sink to cool down your VTX.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it over the electronic components since it might shortcut

    Material : Aluminum
    Size 14x14x6mm
    Weight: 1.1gr
    1 pcs included in package

    SKU: HS14146
    €3.00
    inc. VAT

     IN STOCK
  • Antenna extension - SMA Male Plug to SMA Female Jack (10cm Length)

    Antenna extension - SMA Male Plug to SMA Female Jack (10cm Length)

    Antenna extension - SMA Male Plug to SMA Female Jack (10cm Length) - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Adapter Type: SMA Male Plug to SMA Female Jack ,10cm

    Details:

    Side #1: SMA Female Jack - External Threads w/ No Center Pin

    Side #2: SMA Male Plug - Internal Threads w/ Center Pin

    Length : 10cm

    SKU: PFJC
    €5.99
    inc. VAT

  • CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set

    CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set

    CL-58 5.8GHz Clover-Leaf Spyro Circular Polarized Antenna set, 2 pcs, TX+RX.

    Designed for FPV applications.
    This offers better looks and excellent protection.
    Easy to setup and use standard SMA and RP-SMA connectors.

    Description:
    SWR≤1.5   
    Weight:13g   
    Connect: SMA(needle inside) or RP-SMA(hole inside)
    Size: TX 8cm,  RX 12cm

    SKU: CL-58
    €25.00 €35.00
    inc. VAT

     IN STOCK
  • Clover Leaf Antenna 5.8GHz TX-RX

    Clover Leaf Antenna 5.8GHz TX-RX

    Circular Polarization is one of the biggest step forward in the progression of the FPV experience of the last few years. It has improved signal reception on all bands and brought 5.8Ghz video from one of the least practical systems to now one of the best.

    This is a 5.8Ghz Cloverleaf antenna for your transmitter and receiver.  A plastic enclosure is included to stop the antenna from being bent or damaged.  The connection on this antenna is a SMA type connector.

    A cloverleaf antenna has 3 distinct lobes on it.  Is is usually used to connect to your transmitter unit that is onboard your multicopter or aircraft.  This is an omni-directional antenna so you might have some signal loss when you are flying directly above the receiver as this antenna does not rediate directly below or above the antenna axis.  However overall the cloverleaf antenna is the best type to use for your transmitter.
    Cloverleaf Antenna Specifications

    Set of TX and RX antennas Included!

    •   Gain: 5dBi
    •   Antenna connector: SMA Plug
    •   Standing wave ratio(SWR): <1.5
    •   Length: 8cm
    •   Weight: 12.5g
    SKU: FPVCA02
    €25.00 €29.00
    inc. VAT

     IN STOCK
  • Collapsible folding GPS Antenna Mount without stand

    Collapsible folding GPS Antenna Mount without stand

    Collapsible folding GPS Antenna Mount without stand

    •   Collapsible design
    •   Compatible with 4mm GPS antenna mount.
    •   T6 aluminum
    •   Weight only 4gr
    •   Silver color
    SKU: AV0130A-04201
    €9.00
    inc. VAT

     IN STOCK
  • DJI Naza-M BTU Bluetooth Unit

    DJI Naza-M BTU Bluetooth Unit

    The Naza-M now provides assistant software for iPhone4s, iPhone5, iPad3, iPad4, iPadmini, iPod5. You can do parameter adjustments at any time on your mobile devices, using only the BTU with a built-in Bluetooth module which makes it easier and convenient. It uses low power Bluetooth to minimize the power consumption of your mobile devices. It is easy to use and will automatically save your last connection records. The password mechanism ensures your safety link. Parameters can be automatically synchronized to the Cloud Server and can be restored immediately when you changed your mobile devices.

    Specifications
    •   Built-in Bluetooth(4.0)
    •   Working Temperature: -10℃~+50℃
    •   Communication Distance: 50m
    •   Weight: 17g
    •   Power Consumption: 240mw(0.04A@6V)
    SKU: DJI-Naza-M-BTU
    €49.00
    inc. VAT

     LOW STOCK
  • DUO Diversity 5.8GHz 48CH (RaceBand) receiver RD945 with auto Scan ,LCD screen

    DUO Diversity 5.8GHz 48CH (RaceBand) receiver RD945 with auto Scan ,LCD screen

    The Boscam RD945 is  one of the best FPV receivers on the market and now it has been made even better thanks to its recent upgrade, which provided an additional 8 channels to make it RaceBand compatible. Note that it still offers all of the 32 traditional FPV channels, so it's fully compatible with other 5.8Ghz gear on the market including Fatshark & ImmersionRC gear.

    In addition to the RD945's wide range of frequencies, it also boasts many other features including, a true 40 channel diversity receiver with dual AV outputs which can be used to feed a monitor or goggles; auto channel search at the push of a button, and a clear LCD display that shows band/channel and the actual frequency number. It also supports a wide input voltage range 6-28v making it compatible with most power sources, including LiPo batteries. Finally, we're also impressed with the construction of the RD945. The Rx is contained within a durable metal case, which also acts to shield the receiver increasing its sensitivity.

    Why do I need a diversity reciever?

    A diversity receiver is essentially two receivers all in one. In essence, it allows you two mix and match antennas for a solid video link. So it might be that you select a circular polarised omnidirectional antenna, which will provide good reception in all directions in the near field, and a directional high gain patch antenna for long distance flights. The diversity receiver is clever in that it will seamlessly switch between the receiver with the strongest signal.

    What is RaceBand?

    RaceBand was first pioneered by ImmersionRC to allow more pilots to race together without interferance. Essentially, RaceBand is just another set of 5.8Ghz frequencies, to be specific they are: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917. The difference between the RaceBand and the other 5.8Ghz bands is that RaceBand frequencies are more spread out across its band (37mhz separation) thus allowing more pilots to fly FPV together without their video feeds causing interference with each others.

    Note that many shops are still selling the the old FR632 32-channel version, which does not support RaceBand.

    Features:

    •     48 channels / 6 Bands - includes Race Band channels compatible with Fatshark & ImmersionRC gear
    •     Auto channel scan and lock on
    •     True 5.8GHz 32CH diversity system with indicator
    •     Dual buffered AV output for DVR or second monitor
    •     LCD display, frequency and channel synchronous display
    •     Power off channel memory

    RECEIVER Frequency:

        FR1 to FR6 Bands
     

    For best range and video link stability we recommend using circular-polarized, Patch or Helical Antenna Set (SMA), see 'related products' below.

    SKU: BOSCFR632
    €79.90
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna RP SMA Male to RP Female-20CM

    Extension Cable for Antenna RP SMA Male to RP Female-20CM

    Extension Cable for Antenna RP SMA Male to RP Female-20CM  - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 20cm

    SKU: SMAEXT2
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna RP-SMA jack to RP-SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 5cm

    SKU: RPSMAEXT6
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 5cm, 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 5cm

    SKU: SMAEXT4
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA jack to SMA plug,10cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug,10cm, 90 Degrees

    Extension Cable for Antenna SMA jack to SMA plug, 10cm , 90 Degrees - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 10cm

    SKU: SMAEXT5
    €6.00
    inc. VAT

     IN STOCK
  • Extension Cable for Antenna SMA Male to Female-20CM

    Extension Cable for Antenna SMA Male to Female-20CM

    Antenna extension - Extension Cable for Antenna SMA Male to Female,20CM  - Flexibility Your FPV System Deserves!

    An easy way to add the flexibility you need, this flexible adapter cable is an easy and effective way to adapt your FPV system with simplicity & ease.

    Utilizing a flexible cable system, this cable allows you to bend your antenna to the most optimal angle, allowing your FPV experience to be maximized with effective range.

    Easy to use and a great way to adapt your differing SMA connector types, use this flexible system for a quick and easy solution that gives your FPV system the flexibility it deserves!

    Length 20cm

    SKU: SMAEXT1
    €6.00
    inc. VAT

     IN STOCK
  • FatShark 5.8GHz Receiver Module for Dominators

    FatShark 5.8GHz Receiver Module for Dominators

    FatShark 5.8GHz Receiver Module for Dominators


    This 5.8ghz FPV Video/Audio Receiver Module from Fat Shark, is the perfect addition to one's Dominator Goggles. With this receiver you do not need to have any external video receiver. This helps eliminate tether wires going to the goggles giving one the freedom to move around without wires.

    This module fits into the Dominator on the side of the goggles and works perfectly with ImmersionRC's or FatShark's 5.8ghz video transmitters.

    Receive on the following frequencies:
     

    •   5740ghz
    •   5760ghz
    •   5780ghz
    •   5800ghz
    •   5820ghz
    •   5840ghz
    •   5860ghz

     

     

    SKU: 2901012
    €58.90
    inc. VAT

     72HR STOCK

Manufacturers

Back