Flybarless controllers

Flybarless controllers

Flybarless combos and controllers

Products


  • 3G Link cable

    3G Link cable

    ●3G link cable incorporates PC configuration GUI (graphical user interface) and latest 3G firmware update to improve system stability, and added pirouette compensation to stabilize center point during pirouettes.
    ●Opens up numerous configuration parameters within the 3G system. Pilots can fine tune the system through the PC GUI to suit individual preferences.
    ●Configurable parameters includes options relating to aileron, elevator, rudder, and combined functions.
    ●Provides real time display of radio control signal speed output, so pilot can fine tune the system based on the helicopter response to control sticks relationship display .
    ●Ability to display the current status of parameters in 3G system for setup verification.
    ●Parameter import/export function to allow backup of settings, as well as exchange of parameters with others through internet.

    ●Compatible with USB version 1.0/1.1/2.0
    ●Minimum OS requirement:WINDOWS XP/ VISTA/ 7
    ●CD Content:
    3G V2.1 Upgrade Software
    3G Configuration GUI
    USB Driver
    Microsoft .NET Framework 3.5 URL
    Instruction Manual

    SKU: HEP3GF02
    €12.99
    inc. VAT

     72HR STOCK
  • APS Gyro

    APS Gyro

    APS Gyro is an electronic flight augmentation device, and can only function when used with Align's 3GX flybarless system. With APS gyro installed, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home. It is the perfect tool for flight training, as well as aerial photography applications.
    Functions of Align APS Gyro :
    1.Semi-autonomous take off / Landing.
    2.Point to point automatic flights.
    3.Emergency bailout stabilization.
    4.Failsafe:Automatic return home during loss of signal situation.
    5.Simple logical setting through transmitter.
    6.Supports software upgrades.
    Features:
    ●Align APS has build in 3-axis accelerometer, 3-axis magnetic compass, altimeter, and GPS sensor to work with DSP processor to enable APS to have precise detection and control abilities.
    ●For use with Align's 3GX flybarless system for ease of install and simplified setup, APS is functional with a few setup steps.
    ●Multi flight mode and multi navigate functions. Which is the system with most modes and functions in the current market.
    ●Failsafe function, When helicopter lose RC signal, APS will take over and fly the helicopter back to where the helicopter regains RC signal.
    ●Automatically helicopter stabilize function. When helicopter's attitude is not stable, switch to APS Mode will enable APS to immediately stabilize helicopter and provide a big help for the beginners.
    ●Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
    ●Supports software upgrades.

    ●APS Control Unit × 1
    ●APS Sensor × 1
    ●APS gyro anti-vibration foam × 6(34x9x3mm)
    ●APS sensor mount × 1(34.5x30x6mm)
    ●APS sensor mounting platform tailboom clamp (550-700) × 1
    ●APS sensor mounting platform tailboom clamp (500) × 1
    ●APS sensor mounting platform tailboom clamp (450) × 1
    ●APS controller vibration dampening metal plate × 1(35.4x27.9x3mm)
    ●Signal Y-adapter × 1
    ●APS Signal wire × 1(350mm)
    ●GPS Signal wire × 1(160mm)
    ●Self tapping screw × 2(T2x10mm)
    ●Self tapping screw × 2(T2.6x10mm)
    ●Self tapping screw × 2(T3x12mm)
    ●Gyro foam × 1 (3M 24x24x2mm)
    ●Plastic flat screwdriver × 1(Φ3xΦ7x40mm)
    SKU: HEGAPS01
    €625.00
    inc. VAT

     72HR STOCK
  • Bavarian Demon Flybarless system Protective ultrasound cap

    Bavarian Demon Flybarless system Protective ultrasound cap

    If any Bavariandemon /HeliCommand X-series device is installed in a turbine-powered model we recommend the use of this protective ultrasound cap.

    The HC-X-series is prepared as standard for use in turbine-powered models by internal sound-guarding measures. However, this protection may not be sufficient, depending on the individual design and construction of the fuselage.

    To cover even these eventualities the use of the protective ultrasound cap is absolutely essential for use in models with a turbine power system.

    SKU: BD85705000
    €27.00
    inc. VAT

     LOW STOCK
  • BavarianDEMON 3SX Flybarless system for Helicopters with Auto stabilization and Fail safe

    BavarianDEMON 3SX Flybarless system for Helicopters with Auto stabilization and Fail safe

    High-quality, extremely compact 3-axis flybarless system
    Unique Rescue and Horizon modes
    Highest-quality silicon MEMS gyros on gold-plated circuit board

    FACTS & FEATURES:

    • World’s only true Rescue modes
    • Symmetric torque control
    • Usable in all types of RC helicopters (including flybar machines)
    • Supports all current servo and swashplate types as well as virtual swashplate rotation
    • CNC -milled aluminum housing
    • Various installation options, horizontal or vertical
    • Intelligent setup wizard
    • Real Time-Tuning for optimization of parameters in flight
    • Online up-datable
    • Internal swashplate mixer
    • Ultra-fast tail rotor gyro

    PRODUCT DESCRIPTION:

    The bavarianDEMON 3SX is a high-quality, exceptionally compact flybarless system for model helicopters.
 As a particular highlight for those who place particular value on the utmost security of their valuable RC helicopters the 3SX offers a rescue or horizon mode steered via an auxiliary channel. The rescue mode is - surprise, surprise - unique worldwide and enables the helicopter to shoot upwards via an automatic pitch action in addition to horizontal alignment.
     
    The 3SX contains a high-quality silicon MEMS gyroscope from the newest generation on a gold-plated printed circuit board, a demoniacally fast integrated tail gyroscope and a symmetric torque control.
The bavarianDEMON 3SX is universally usable for demoniacally rough 3D flights as well as for large scale helicopters (two and multiple blade).
It is even suitable for beginners due to the optional connectible horizon mode.
 The 3SX patented horizontal stabilization system contains various modes which specifically and completely automatically quickly steer the helicopter back into a horizontal flight attitude from flight manoeuvrings such as tic toc or piro flip - if the pilot would like this. The stabilization strength and the turning off and on of the horizontal mode can take place - via an auxiliary channel - directly from the transmitter.
     
    The 3SX is usable in electric, nitro, combustion-powered and turbine-powered helicopters.
 It supports all current analogue, digital and brushless servos, including narrow pulse servos on the tailpiece as well as all current swashplate variants and virtual swashplate torsion.
 The bavarianDEMON 3SX comes to its new owner in this elegant, demonically colored CNC-milled aluminium housing. Here it offers flexible installation options no matter whether horizontal or vertical.
Programming is conceivably simple thanks to a demoniacally brilliant set-up assistant.
In addition, the bavarianDEMON 3SX offers real-time-tuning for optimization of all important parameters in the flight.

     
    The connection cable from the receiver to the Bavarian Demon 3SX is inserted on both sides.
Of course, a Bavarian Demon 3SX is capable of on-line update via an integrated flash memory. In addition to its excellent flybarless features, the Bavarian Demon 3SX is hence a quasi "real-flying flight simulator" - however at the highest fun level.

    Included

    • Main sensor unit including mounting pads
    • Cable loom for receiver connection (90mm)
    • USB lead for direct connection to PC / Notebook
    • Firmware update via web
    SKU: BD8591
    €379.00
    inc. VAT

     LOW STOCK
  • BavarianDemon 3SX, 3X & Cortex Cable loom L150

    BavarianDemon 3SX, 3X & Cortex Cable loom L150

    BavarianDemon 3SX, 3X & Cortex Cable loom L150

    1 pcs. cable loom, 150mm
    Suitable for 3SX, 3X and CORTEX

    (1 pc. included in the delivery of the systems. Only as an accessory if the original is not suitable.)

    SKU: BD-CABLE-LOOML150
    €18.90
    inc. VAT

     LOW STOCK
  • BavarianDEMON 3X Flybarless system for Helicopters

    BavarianDEMON 3X Flybarless system for Helicopters

    3X: The worlds best 3-axis flybarless system
    Ideal for demonic 3D maneuvers
    Absolute stability, also in large scale helicopters

    FACTS & FEATURES:

    • Symmetric torque control
    • Usable in all types of flybarless RC helicopters
    • Supports all current servo and swashplate types as well as virtual swashplate rotation
    • CNC- milled aluminum housing
    • Various installation options, horizontal or vertical
    • Intelligent setup wizard
    • Real Time-Tuning for optimization of parameters in flight
    • Online up-datable
    • Internal swashplate mixer
    • Ultra-fast tail rotor gyro

    PRODUCT DESCRIPTION:

    The bavarianDEMON 3X is especially aimed at extreme 3D pilots, but also works X-extremely well for all other flybarless helis. Latest software algorithms, intelligent sensor technology combined with an unprecedented power, all this fitting the entire range of flybarless helicopters, electric, nitro, gaser and turbine powered. Because they are lighter, helicopter models without flybar are much more agile and maneuverable, and are approx. 15% more powerful. In combination with the bavarianDEMON 3X , huge performance is delivered, without the need to adjust the fragile flybar mechanism.

    Included

    • Main sensor unit including mounting pads
    • Cable loom for receiver connection
    • USB lead for direct connection to PC / Notebook
    • Firmware update via web

     

    SKU: BD8590
    €195.00
    inc. VAT

     72HR STOCK
  • BavarianDEMON AXON Bluetooth Flybarless controller

    BavarianDEMON AXON Bluetooth Flybarless controller

    Especially developed for all kind of RC helicopter, the AXON combines all State-of-the-Art features, without leaving a simple handling behind – primarily including the soon available Android- & iOS-Apps via Bluetooth. As one of the most important details when out at the flying field is the intuitive and easy handling and tuning of all parameter without the need of a PC or separate programming unit.

     

    •     Ultra-precise flight control
    •     Latest 32-bit technology
    •     Multiple Horizon- and Rescue modes
    •     3 bank sets
    •     Integrated governor (electric and gaser/nitro)
    •     Intelligent vibration analysis
    •     Android & iOS App Multi protocol input
    •     Future-proof via online update
    •     Prepared with sensor bus

    WHAT'S IN THE BOX

    •     AXON main unit
    •     Double-sided mounting tape, one each of ‚Acro‘ ACP and ‚Soft‘ ACP
    •     Cable loom to receiver (150mm)
    •     Mini USB cable Product information

     

    SKU: AXON
    €349.00
    inc. VAT

     LOW STOCK
  • BavarianDEMON CORTEX controller for Airplanes

    BavarianDEMON CORTEX controller for Airplanes

    New 3-axis stabilization system for fix wing model aircraft
    Extremely smooth flight characteristics - even in strong, gusty wind
    Faster training - Adjustable gyro assistance – Precise flight

    FACTS & FEATURES:

    • Easy to Run: simply read in your current control signals – ready
    • No PC necessary

    Supports:

    • 2 ailerons
    • 2 elevators
    • 1 rudder
    • Supports various receiver systems:
    • S.Bus (receipt)
    • Spektrum/JR satellites (up to 2 sats)
    • Jeti-/PWM-/PPM sum signal
    • Conventional receivers
    • Software and firmware updates via web


    The bavarianDEMON CORTEX is a stabilization system for fix wing model aircraft. And hence an absolute world first in this form.  The new brain and heart of your high-quality aircraft – immediately ready to run.  The CORTEX does not require any PC or additional software settings - unless it is desired. The CORTEX comes with a sensor unit, connection cable harness, adhesive pads, USB connection cable and exclusive design and information material from your favourite demon. There are software and firmware updates conveniently on the web. But the most important thing is the demon inside. Since it means pure flight fun with the greatest possible carelessness. No or hardly any more additional spending due to crashes. You will train faster with the CORTEX whereby the adjustable stop level helps. However and primarily for experienced pilots or demons among you, the CORTEX is indispensable from now on.

    Included

    • Main sensor unit including mounting pads
    • Cable loom for receiver connection (90mm)

    Optional accessory :USB lead for direct connection to PC / Notebook

    SKU: BD8593
    €259.00
    inc. VAT

  • BavarianDEMON Cortex PRO 3-axis Gyro for RC Planes

    BavarianDEMON Cortex PRO 3-axis Gyro for RC Planes

    BavarianDEMON Cortex PRO 3-axis Gyro for RC Planes

    The CORTEXpro opens up the next generation gate with even more demonic features and fun factors. Based on the latest 32-bit CPU technology and in addition to all state-of-the-art features, the brand new CORTEXpro offers a bunch of great news for more comfort in flight and setup. The combination of easy programming and basic setup without software, automatic signal type detection, compatibility with invariably all common analog and digital serial protocols, as well as the dual and redundant serial input and output option, is absolutely unique.

    Let the DEMON take control over your cockpit and test the new CORTEXpro now! More fun, more safety, more comfort – presumably only your breath will backpedal…

     
    Features:

    • Multi protocol input and output
    • Latest 32-bit technology
    • Up to 24 channels, 16 stabilized
    • Receiver redundancy for 2 inputs
    • iOS & Android App for fine tuning
    • Easy teach-in via Tx
    • No software needed

     

    SKU: CORTEXPRO
    €299.00
    inc. VAT

     LOW STOCK
  • BavarianDEMON Helicommand RIGID V.2 Stabilization Assistant for Helicopters

    BavarianDEMON Helicommand RIGID V.2 Stabilization Assistant for Helicopters

    3-axis stabilization system for RC helicopters
    Demonically safe: With "Autopilot" function
    Ideal for beginner

    FACTS & FEATURES:

    • Stabilizes all horizontal control movements plus tail
    • RIGID mode for stabilization of flybarless rotor heads
    • Fail-safe function
    • For all types of helicopters
    • Auto-trim function
    • Integrated swashplate mixer
    • PILOT (stabilization) + AUX (tail gyro) channels
    • Linearisation of servo movements
    • Virtual swashplate rotation

    PRODUCT DESCRIPTION:

    The bavarianDEMON 3X is especially aimed at extreme 3D pilots, but also works X-tremely well for all other flybarless helis. Latest software algorithms, intelligent sensor technology combined with an unprecedented power, all this fitting the entire range of flybarless helicopters, electric, nitro, gaser and turbine powered. Because they are lighter, helicopter models without flybar are much more agile and maneuverable, and are approx. 15% more powerful. In combination with the bavarianDEMON 3X , huge performance is delivered, without the need to adjust the fragile flybar mechanism.

    Included

    • Sensor unit including mounting pads
    • Cable loom for receiver connection
    • USB lead for direct connection to PC / Notebook
    SKU: BD8592
    €279.00
    inc. VAT

     72HR STOCK
  • BavarianDEMON USB PC connection lead for setting up

    BavarianDEMON USB PC connection lead for setting up

    BavarianDEMON USB PC connection lead for setting up and storing all parameters and options.

    Also provides a possibility of transfering complete (pre-programmed) settings into and from the bavarian DEMON.

    The required USB cable is already part of the scope of supply. The PC ... Only connect the PC adapter the PC after the setup software has been installed

    SKU: BD92774
    €25.90
    inc. VAT

     IN STOCK
  • BEASTX 8cm Receiver Adapter- BX76002

    BEASTX 8cm Receiver Adapter- BX76002

    BEASTX Receiver Adapter Cable 8cm-BX76002

    SKU: BTXA76002
    €9.90
    inc. VAT

     LOW STOCK
  • BeastX Microbeast Receiver Adapter Cable 15cm

    BeastX Microbeast Receiver Adapter Cable 15cm

    Set of long receiver wiring leads for the MICROBEAST flybarless system.

    Length of 15cm and intended to be used to connect the MICROBEAST to your receiver.

    Package includes:

    • 3 multi conductor receiver leads, each 15cm in length.
    SKU: BTXA76006
    €9.90
    inc. VAT

     72HR STOCK
  • BeastX Spektrum Satellite Adaptor

    BeastX Spektrum Satellite Adaptor

    BeastX Spektrum Satellite Adaptor BXA76009

    SKU: BXA76009
    €18.50
    inc. VAT

  • BLE2SYS Microbeast Bluetooth Interface

    BLE2SYS Microbeast Bluetooth Interface

    BLE2SYS Microbeast Bluetooth Interface

    Simply set your Microbeast parameters with your smartphone through BLE2SYS Bluetooth Smart Interface.

    Specifications:

    • Weight: 2,9g
    • Dimensions: 42,5x16x4,5mm

    In the box:

    • BLE2SYS Bluetooth Interface x1
    • 10cm wire (JR connector) x1
    SKU: BXA76015
    €39.90
    inc. VAT

     LOW STOCK
  • Futaba GYA460 Gyro - 6-Axis Flight Control (Aero)

    Futaba GYA460 Gyro - 6-Axis Flight Control (Aero)

    The new Futaba GYA460 is a 6 axis aircraft gyro which includes automatic flight attitude control and stabilisation. As well as having 3 independent gyros the GYA460 also features 3 acceleration sensors for attitude correction. With the GYA460 in operation the aircraft will maintain a stable attitude, whatever the wind conditions, enabling the pilot to enjoy flying the model instead of fighting the conditions.

    In beginner mode the maximum roll, pitch or yaw angle is limited to about 80°, and in the event of loss of control, the pilot can simply release the transmitter stick and the model will automatically recover into level flight. When the unit is in gyro mode, this recovery feature is disabled, allowing the model to carry out the full range of aerobatic manoeuvres, whilst gaining the stability and smoothness the 3 gyros bring

    With the gyro switch off model relies entirely on the skill of the pilot.

    The GYA460 is suitable for models with 2 aileron servos as well as Deltas or other models with elevons.

    Specifications:

    • 6-axis Flight Stabilisation
    • HV compatible
    • S-Bus or PWM connection options
    • 3 Flight modes
    • Beginner mode with emergency function
    • Elevon compatible

    Content:

    • GYA460
    • Connection lead PWM
    • Mounting pad
    • Mini screwdriver
    SKU: P-GYA460
    €90.90
    inc. VAT

     72HR STOCK
  • Gpro Flybarless System

    Gpro Flybarless System

    New multifunctional Gpro flybarless system with active CPU, processing 20 times faster than previous generation. The freshly new software structure improves system compensation, bring GPro up with precise and agile response, and also keep up-to-date flying performance than ever.The most important is that utilizes with latest iOS and Android APP can be easily and directly adjusted through mobile phone while at the field. New human oriented interface allows convenient and rapid setup and installation.

    Brand new CPU, processing 20 times faster than previous generation, bring GPro up with precise and agile response.
    Freshly new software process structure improves system compensation and keep up-to-date flying performance.
    Utilizes with latest iOS and Android APP that GPro can be easily and directly adjusted through mobile phone while flying outdoors.
    New human oriented interface allows convenient and rapid setup and installation.
    Superior flying characteristic remain the same flying control among T-REX 250-800 helicopters.
    Full support receivers and satellites currently on the market, including S.BUS/X.BUS and DSM2/DSMX/DSMJ/DMSS.

    Specifications:

    • Operating voltage range:DC 3.5V-8.4V.
    • Operating current consumption:<100mA  4.8V.
    • X and Y axis Operating Angle Range:-300/+300 degree
    • Z axis Operating Angle Range:-600/+600 degree
    • Sensor resolution: 12bit
    • Supports 90/120/135/140 CCPM swashplates
    • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
    • Futaba S.BUS/JR X.BUS system support
    • Rudder support 760 narrow band servos
    • Supports multi-blade rotor heads
    • Engine speed governor range:10500-21000 RPM
    • Operating Temperature:-20/65 degree
    • Operating Humidity:0%95%
    • RoHs cerification stamp
    • Size:36.5x25.2x15.6 mm
    • Weight:11.5g

    Includes:

    • USB Link cable set x 1
    • Signal wire x 3
    • Gpro Sticker x 1
    • Gpro Double Sided Tape x 2
    SKU: HEGPRO01
    €199.90
    inc. VAT

     72HR STOCK
  • Helicommand Pc interface USB

    Helicommand Pc interface USB

    PC USB interface for Helicommand- Bavarian demon ( All models)

    SKU: RCM16307
    €37.00
    inc. VAT

  • Helicommand Profi

    Helicommand Profi

    Designed for professional usage with industrial helicopters, commercial applications, and machines which are particularly valuable.
    • Particularly smooth and accurate stabilisation when the helicopter is hovering.
    • Positional stability up to altitudes of about 10 m, in winds of up to about 5 m / sec. Also suitable for use in built-up areas.
    • Expanded safe temperature range
    • High-grade fail-safe function (for PCM / FM) with automatic landing if radio link fails.
    • Serial interface for optional ground-link telemetry and for future additional instruments (magnetic compass and GPS)
    • Electronic linearisation with four-servo linkages to guard against mechanical stress
    • Robust, weatherproof aluminium housing with integral vibration / shock absorption features

    High-quality instrumentation for maximum security.
    Essential features include:

    • Four optical imaging systems
    • Triple-axis accelerometers
    • Three high-quality SM gyros
    • Air-pressure altimeter
    • Four micro-processors
    • Second redundant CCD sensor for drift monitoring

    Purchase price includes configuration to the individual helicopter !

    Specification :
    Operating voltage: 4.8 - 6 Volts (4 - 5 NC)
    Current drain: approx. 300 mA at 5 V; approx. 200 mA at 6.5 V
    Weight complete: 230 g
    Dimensions: Height 73 mm, total 85 mm incl. lower protective tube, diameter 74 mm, 61 mm with side flattened

    SKU: RCM19024
    €3599.00
    inc. VAT

  • HYPE X3-Control Gyro system

    HYPE X3-Control Gyro system

    HYPE X3-Control Gyro system 

    The X3 Control is a 3-axis gyro system for stabilizing the attitude in surface models. The module can be used with any receiver system and is NOT linked to specific RC brands! The built-in motion sensors detect even the slightest movement of the model change at an early stage. Even before the human eye can perceive the movement of the model at all, the X3 Control already calculates a correction control pulse and sends it to the corresponding servo.

    The X3 module has 3-axis gyro and accelerometer sensors, which take control of the flight model in the three defined axes. A separate control channel, the module can be activated or deactivated in flight. In practice, support the X3 Control the pilot flying and the model can formally engage in the relevant flight position. Especially in gusty wind conditions, the model with the X3 Control is much calmer and more stable in the air.

    Specifications:

    • Input Voltage: 4.8-6V, current consumption approx: 48mA;
    • Dimensions including power strip: 47x23x10mm, weight (without cable): 3g

    Features:

    • 3-axis stabilization for airplanes
    • Adjustable control values ​​for each axis
    • Can be used with any remote control system!
    • Reversing the servo directions
    • Compact size
    • Light as a feather! Only 3g weight
    SKU: HYP27-1199
    €44.90
    inc. VAT

  • IKON FLYBARLESS SYSTEM

    IKON FLYBARLESS SYSTEM

    Ikon system- if not availiable, we will deliver the MSH brain instead.
    SKU: IKN1001
    €230.00
    inc. VAT

     72HR STOCK
  • MICROBEAST PLUS Flybarless Stabilization controller

    MICROBEAST PLUS Flybarless Stabilization controller

    MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft‘s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system. These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

    Box contents (MICROBEAST PLUS):

    MICROBEAST PLUS
    Receiver connection cables
    3M adhesive pads
    Adjustment tool
    Printed instruction manual

    MICROBEASTPLUS and MICROBEASTPLUSHD work with the world‘s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field.

    Further options are available with the optional USB2SYS in­ter­face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

    Specifications:

    • Input voltage  :3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
    • Processor: 32 Bit ARM
    • Sensor :6-Axis MEMS (Gyro + Accelerometer)
    • Dimensions :36 x 25 x 14 mm
    • Weight (w/o wiring) : Approx 11g

    Features:

    • Servo center pulses:
    • Swashplate: 1520µs
    • Rudder: 1520µs, 960µs, 760µs

    Servo pulse rates:

    • Swashplate: 50 - 200Hz
    • Rudder: 50 - 560Hz

    Swashplate mixing:

    • mCCPM, eCCPM: 90, 120, 135, 140
    • Swash phasing (by using StudioX)

    Input signals:

    • Single channels
    • PPM serial pulse
    • SRXL (JR XBus, SUMD, M-Link...)
    • Futaba S.Bus/S.Bus2
    • Spektrum Remote Receiver* (DSM2/DSMX)
    • * with Spektrum Remote Receiver adapter
    SKU: BXM76400
    €139.90
    inc. VAT

  • MICROBEAST PLUS HD Flybarless Controller

    MICROBEAST PLUS HD Flybarless Controller

    MICROBEAST PLUS HD is designed as „Heavy Duty“ version of MICROBEAST PLUS with an additional switchable high power input. It is particularly suitable for helicopters with standard sized servos and it reflects today‘s requirements for power supply like never before. The power supply port is realized by a well proven, high-quality connector. By using the included switch, the system can be activated electronically and remains operational even if the switch is disconnected by accident. Due to this fact the high power connection may be used without the switch at all. MICROBEAST PLUS HD has a housing in aluminum composite construction.

    MICROBEAST PLUS HD

    • Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
    • Processor: 32 Bit ARM
    • Sensor: 6-Axis MEMS (Gyro + Accelerometer)
    • Dimensions: 36 x 25 x 21mm
    • Weight (w/o wiring): ca. 19g

    Features:

    • Servo center pulses:
    • Swashplate: 1520µs
    • Rudder: 1520µs, 960µs, 760µs

    Servo pulse rates:

    • Swashplate: 50 - 200Hz
    • Rudder: 50 - 560Hz

    Swashplate mixing:

    • mCCPM, eCCPM: 90, 120, 135, 140
    • Swash phasing (by using StudioX)

    Input signals:

    • Single channels
    • PPM serial pulse
    • SRXL (JR XBus, SUMD, M-Link...)
    • Futaba S.Bus/S.Bus2
    • Spektrum Remote Receiver* (DSM2/DSMX)
    • * with Spektrum Remote Receiver adapter


    Box contents:

    • MICROBEAST PLUS HD
    • Switch harness
    • Power cable
    • Receiver connection cables
    • 3M adhesive pads
    • Adjustment tool
    • Printed instruction manual
    SKU: BXM76500
    €159.90
    inc. VAT

     72HR STOCK
  • MICROBEAST PLUS PRO-EDITION Flybarless controller

    MICROBEAST PLUS PRO-EDITION Flybarless controller

    MICROBEAST PLUS is based on the popular MICROBEAST and starts the next level of the BEASTX flybarless revolution. MEMS sensors of the latest generation measure the aircraft′s rotational movement with unprecedented precision and transmit the data digitally and in real time to the control system.
    These new sensors are insensitive to typical vibrations of a model helicopter. The housing made of plastic composite material keeps the weight of MICROBEAST PLUS sensationally low.

    MICROBEAST PLUS and MICROBEAST PLUS HD work with the world′s proven EasySetup of BEASTX. The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can be changed simply and easily at the flying field.

    Further options are available with the optional USB2SYS in-ter-face and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can customize the unit specifically to their needs. StudioX for Windows & Mac is available for download at www.beastx.com.


    Additional features of PRO EDITION
    Governor
    AttitudeControl*

    *) AttitudeControl contains following functions:

    • Rescue mode (with/without extra pitch)
    • 3D-mode (with/without extra pitch)
    • Hover trainer

    Specifications

    • Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
    • Processor: 32 Bit ARM
    • Sensor: 6-Axis MEMS (Gyro + Accelerometer)
    • Dimensions: 36 x 25 x 14 mm
    • Weight (w/o wiring): ca. 11g

    Features

    • Servo center pulses:
    • Swashplate: 1520µs
    • Rudder: 1520µs, 960µs, 760µs

    Servo pulse rates:

    • Swashplate: 50 - 200Hz
    • Rudder: 50 - 560Hz

    Swashplate mixing:

    • mCCPM, eCCPM: 90, 120, 135, 140
    • Swash phasing (by using StudioX)

    Input signals:

    • Single channels
    • PPM serial pulse
    • SRXL (JR XBus, SUMD, M-Link...)
    • Futaba S.Bus/S.Bus2
    • Spektrum Remote Receiver* (DSM2/DSMX)  * with Spektrum Remote Receiver adapter

    Content

    • MICROBEAST PLUS PRO-EDITION
    • Receiver connection cables
    • 3M adhesive pads
    • Adjustment tool
    • Printed instruction manual


    Optional Accessories:

    • USB2SYS Interface
    • Spektrum Remote Receiver adapter
    SKU: BXM76400PE
    €249.00
    inc. VAT

     72HR STOCK

Manufacturers

Back