Connectors & Cables

Connectors & Cables

We are the #1 provider of high performance connectors in the R/C market place.

Products


  • 12FG charge connector

    12FG charge connector

    Connector DIY for charge cable. You will need to solder the cable , supplied connector Only

    SKU: SKU21104
    €5.00
    inc. VAT

     IN STOCK
  • 2 pin LOCKING Connector

    2 pin LOCKING Connector

    Set of Male+Female with 15cm wire attached.

    • Locking device, patented.
    • Use is where you want to be safe your battery doesnt disconnect in flight.


    SKU: KRC1002
    €4.00
    inc. VAT

     IN STOCK
  • 2-7S Adaptor JST-EH

    2-7S Adaptor JST-EH

    LBA 7U JST-EH Adaptor (Board Only)

    NEW! Balancer Multi-Adapter for Hyperion Balance Chargers. This is the 2S to 7S Board ONLY.
    SKU: EOSLBA7UEH
    €6.00
    inc. VAT

  • 3s Lipo Balance Extension Lead (JST-XH) 30cm

    3s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 3s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

    SKU: 3SBALEXT
    €2.50
    inc. VAT

     IN STOCK
  • 4s Lipo Balance Extension Lead (JST-XH) 30cm

    4s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 4s Lipo Balance Extension Lead (JST-XH) 30cm
    This extension made from 24awg cable. produced in Germany
    SKU: 4SBALEXT
    €2.60
    inc. VAT

     IN STOCK
  • 5s Lipo Balance Extension Lead (JST-XH) 30cm

    5s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 5s Lipo Balance Extension Lead (JST-XH) 30cm
    This extension made from 24awg cable. produced in Germany
    SKU: 5SBALEXT
    €2.80
    inc. VAT

     IN STOCK
  • 6mm gold connectors with housings,180 amp rated

    6mm gold connectors with housings,180 amp rated

    Rated up to 180 amps, 6mm gold connector, with Housing, to avoid reverse polarity by mistake and also accidental shortcuts.

    Gold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!

    Rated to around 180A , Excellent for high current systems., and High voltage setups.
    Pack includes 2 male, 2 female, 2 housings

    SKU: RCON-GOLD6H
    €4.50
    inc. VAT

     IN STOCK
  • 6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair

    6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair

     6mm RCPROPLUS Supra X Gold Bullet Connectors 10 pair,(10M,10F)

    These Supra X bullet connectors are a must for the modellers who are after the ultimate in a high voltage / high current demand connector. Coated in 24K gold they offer low resistance, large surface contact, recessed wire cavity, solder window and they "click" when pushed together. Excellent for motors, ESC's, batteries, power-meters and chargers.

    Features:

    • High voltage
    • High current
    • Large surface contact
    • Recessed wire cavity
    • Solder window
    • Positive "Click" when pushed together

    Specs:

    • Peak current: 240A
    • Continuous current: 200A
    • Suits wire: 8 ~ 10AWG
    • Finish: 24K Gold Plated 3 microns
    • Quantity: 3 male / 3 female connectors
    SKU: RCA6808SPCP10
    €19.50
    inc. VAT

     IN STOCK
  • Aligator connector

    Aligator connector

    Alligator Connectors. Black+ Red

    SKU: AV1324
    €1.50
    inc. VAT

     IN STOCK
  • Amass 3.5mm gold plated connector with Red Housing

    Amass 3.5mm gold plated connector with Red Housing

    3.5mm gold Connectors for connecting to your battery, speed control, charger, power meter or similar applications!!

    These have low resistance, and gives the best electric flow.

    • Diameter: 3.5mm
    • Current: 80Amp Max
    • Weight: 2.19gr/set

    Included:

    •  2 x Red Casing
    •  2 x Male 3.5mm Gold Bullet
    •  2 x Female 3.5mm Gold Bullet
    SKU: AM-1008
    €2.50
    inc. VAT

     IN STOCK
  • Angled JR plug

    Angled JR plug

    JR plug to make your own sim cable or Trainer cord

    SKU: SKU40933
    €4.50
    inc. VAT

     IN STOCK
  • AS150 7mm Gold Plated Anti Spark Connector Set

    AS150 7mm Gold Plated Anti Spark Connector Set

    This connector features an insulated tip to stop big sparks from higher voltage applications.

    This coupled with the plastic self insulating shroud offers a safe and affective connector package with no shrink tube needed.

    Note:

    •   When powering on, please connect the plug without yellow collar first, and then connect the plug wth yellow collar.
    •   There is a Aniti Spark Protector in plug with yellow collar. (Please refer to the picture below.)

    Features:

    • Patented anti-spark design
    • Open side for easy soldering
    • Low resistance cladding
    • Reusable threaded end design, easy to insert / take off from protect case
    • Tightening ring on Female side to prevent losses after long time use

    Specification:
     

    •   Ø7mm (Male Pin) continuance current: 150A
    •   Peak current: 200A
    SKU: AMASS-AS150
    €8.30
    inc. VAT

     IN STOCK
  • Banana Panel Mount Jack Socket Connectors

    Banana Panel Mount Jack Socket Connectors

    This jack easily mounts and contains a solder point for connection. 4mm opening to accept banana plugs.
    Set of 2 (Black and Red)

    SKU: RCM20423
    €2.50
    inc. VAT

     IN STOCK
  • Banana Plug set 4mm

    Banana Plug set 4mm

    4mm Banana Jack (Gold plated) set, fits all Chargers..

    Set of  Red & Black or Blue & Yellow

    SKU: RCM16244
    €2.50
    inc. VAT

     IN STOCK
  • Battery Heavy duty connector

    Battery Heavy duty connector

    Excellent quality made in Europe, those cable made from Silicone 2x0.50mm cable.Fits Futaba or Jr ( per choice)Provided QualityThis cable is produced and tested with most modern procedures. Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts. Each product equipped with label or Quality control and date of test.Those cables provided with 3 years Guarantee.

    SKU: MU59189
    €5.00
    inc. VAT

     IN STOCK
  • Battery Heavy duty connector

    Battery Heavy duty connector

    Excellent quality connectors, made in Germany

    The cable made from Silicone 2 x0.50mm .Fits Futaba or Jr ( per choice) .

    This cable is produced and tested with most modern procedures. Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
    Those cables provided with 3 years Guarantee.

    SKU: SKU11222
    €6.00
    inc. VAT

  • BEASTX 8cm Receiver Adapter- BX76002

    BEASTX 8cm Receiver Adapter- BX76002

    BEASTX Receiver Adapter Cable 8cm-BX76002

    SKU: BTXA76002
    €9.90
    inc. VAT

     LOW STOCK
  • BeastX Microbeast Receiver Adapter Cable 15cm

    BeastX Microbeast Receiver Adapter Cable 15cm

    Set of long receiver wiring leads for the MICROBEAST flybarless system.

    Length of 15cm and intended to be used to connect the MICROBEAST to your receiver.

    Package includes:

    • 3 multi conductor receiver leads, each 15cm in length.
    SKU: BTXA76006
    €9.90
    inc. VAT

     72HR STOCK
  • BEC/JST connectors

    BEC/JST connectors

    Set of 2P JST/BEC connectors with Silicone wires, up to 10amps Continious power.
    Including Male and Female. Length : +/- 20cm

    SKU: KRL618
    €3.00
    inc. VAT

     IN STOCK
  • Bid Cable 300 mm

    Bid Cable 300 mm

    Cable for BID chips, 300mm

    SKU: RB8474
    €4.00
    inc. VAT

  • Charge & Balance Cable for T-Rex 150

    Charge & Balance Cable for T-Rex 150

    Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for your 2S battery pack. Connect to your battery with the JST-XH connector, as used in the T-Rex 150. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. Top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    Specifications

    •   Input Charge Connector: Male 4mm Banana Plug
    •   Input Balance Connector: Male 2S JST-XH
    •   Output Connector: Female 2S JST-XH
    •   Wire Type: 22 AWG Silicone
    •   Length: 20CM
    SKU: SKU48601
    €5.00
    inc. VAT

     IN STOCK
  • Charge & Balance Cable for T-Rex 150 Parallel 4 batteries

    Charge & Balance Cable for T-Rex 150 Parallel 4 batteries

    Parallel (6x) JST-XH Charge & Balance Cable for T-Rex 150

    Avizar parallel charge leads allow you to charge up to four battery packs simultaneously. Constructed from silicone cable, produced in Germany, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to four of your 2S battery packs. Connect to your batteries with the JST-XH connectors, as used in the T-Rex 150. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. Top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    Specifications

    •   Input Charge Connector: Male 4mm Banana Plug
    •   Input Balance Connector: Male 2S JST-XH
    •   Output Connector: 2S Female JST-XH
    •   Wire Type: 16 AWG Silicone Charge Lead, 22 AWG Silicone Balance Lead
    •   Current Rating: 8A
    •   Length: 30cm
    SKU: AV53548
    €8.90
    inc. VAT

     LOW STOCK
  • Charge cable T12FG/FX-30

    Charge cable T12FG/FX-30

    Transmitter battery charge lead for T12FG and FX-30 transmitters (1.7 mm).

    SKU: Robbe8260
    €7.00
    inc. VAT

     LOW STOCK
  • Charge cable with Banana connector

    Charge cable with Banana connector

    Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

    Directly connect to your charger with Banana 4mm bullet connectors, and bare wires to connect any of your desired connectors.
    50cm of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup.

    Specifications

    •   Input Connector: Male 4mm Banana Plug
    •   Output Connector: Bare wires
    •   Wire Type: 12 AWG Silicone
    •   Length: 50cm
    SKU: KRB669C
    €5.00
    inc. VAT

     IN STOCK

Manufacturers

Back