Other Motors

Other  Motors

In this section you will find different Electric motors. if you dont know what you need, mail us, and we will advise about the best application for your needs.

Products


  • 500MX Motor Shaft

    500MX Motor Shaft

    Apply for RCM-BL500MX Motor

    Specification:

    500MX Motor Shaft x 1(4.8x5x67mm)
    Bearings 695ZZ x 1
    Bearings MR95ZZ x 1

    SKU: HMP50M02
    €12.50
    inc. VAT

     LOW STOCK
  • 800MX Brushless Motor(440KV)

    800MX Brushless Motor(440KV)

     800MX Brushless Motor(440KV)

    Product info HML80M04T
    Instructions:

    •  To meet the power and torque requirements of enthusiasts, the high output 800MX motor was born in Alignfs R&D lab. With dramatic increase in torque and power output, capable of 4440 watts continuous power output and 8800 watts of burst power!
    •  800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it's capable of maintaining consistent torque and head speed through continuous F3C maneuvers..
    •  Due to the 800MXfs high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
    •  800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    •  The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    •  Maintenance freeAhigh torqueAhigh efficiencyAstable, and low noise.
    •  Highspeed ball bearings, powerful magnetic outrunner rotor.
    •  Suitable For TREX 700E/800E F3C.


    Specification:

    •  Input Voltage:3S12S
    •  Max Continuous Current: 100A/200A(2sec)
    •  Max Output Power: 4440W/8800W(2sec)
    •  KV Value: 440KV
    •  Stator Arms: 12
    •  Magnet Poles: 10
    •  Dimension: Spindle 6x56.7x94.5mm
    • œWeight: 508g


    Accessories:

    •  Socket screw(M4X10)X4
    •  Washer(Ø4XØ10X1)X4
    •  4mm gilt terminal x 3


    SKU: HML80M04T
    €236.00
    inc. VAT

     LOW STOCK
  • 800MX Brushless Motor(520KV)

    800MX Brushless Motor(520KV)

     800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it’s capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
    Due to the 800MX’s high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
    800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    Maintenance free、high torque、high efficiency、stable, and low noise.
    High-speed ball bearings, powerful magnetic outrunner rotor.
    Suitable for T-REX 700E 、T-REX800E helicopters.

    SPECIFICATIONS

    • Input Voltage: DC11.1V-50.4V
    • Max Continuous Current: 115A/250A(2sec)
    • Max Output Power: 5100W/11000W(2sec)
    • KV Value: 520KV
    • Stator Arms: 12
    • Magnet Poles: 10
    • Shaft: 6x56.7x93.5mm
    • Weight: 508g
    SKU: HML80M01
    €229.00
    inc. VAT

     72HR STOCK
  • Align 250MX Brushless Motor(3600KV)

    Align 250MX Brushless Motor(3600KV)

    The 250MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.

    • Input voltage:2S~3S 2-3cell Li-Po
    • Max continuous current:16/24A(5sec)
    • Max output power:Approx. 170w/250W(5sec)
    • KV value:3600KV
    • Dimension:spindle 2.5xΦ25.5x22.4mm
    • Weight:Approx. 33.5g
    SKU: HML25M01
    €29.90
    inc. VAT

     72HR STOCK
  • Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor(1800KV)

    1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    3.Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
    4.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    5.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    8.Suitable for T-REX 450E series,Must with RCE-BL45X Brushless ESC(Governer Mode)(HES45X01).

    Specification:
     

    • Input voltage:6S
    • Max continuous current:30A/45A(5sec)
    • Max output power:Approx. 650w/970W(5sec)
    • KV value:1800KV
    • Dimension:spindle 3.5x29.2x38mm
    • Weight:Approx. 87g

    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(Φ2.6XΦ5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set
    SKU: HML46M01T
    €55.90
    inc. VAT

     72HR STOCK
  • Align 850MX Brushless Motor (540KV)

    Align 850MX Brushless Motor (540KV)

    Align 850MX Dominator Brushless Motor (540KV)

    To meet the power and torque requirements of enthusiasts, the high output 850MX motor was born in Align’s R&D lab. With dramatic increase in torque and power output, capable of 5330 watts continuous power output and 110000 watts of burst power!
    Inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It's capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
    850MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    The 850MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    Maintenance free, high torque, high efficiency, stable, and low noise.
    High-speed ball bearings, powerful magnetic outrunner rotor.
    Suitable for T-REX 700E series helicopters and other 700 level models.

    Specification:

    • Input Voltage:12S
    • Max Continuous Current: 120A/250A(2sec)
    • Max Output Power:5330W/11000W(2sec)
    • KV Value: 540KV
    • Stator Arms: 12
    • Magnet Poles: 10
    • Dimension: Spindle 6x56.7x112.5mm
    • Weight: 570g

    Accessories:

    • Socket screw(M4x10)X4
    • Washer(F4xF10x1)X4
    • 4mm gilt terminal x 3
    SKU: HML85M01T
    €264.00
    inc. VAT

     72HR STOCK
  • Align Brushless Motor 460 MX 3200 KV

    Align Brushless Motor 460 MX 3200 KV

    Align 460MX Brushless Motor 3200KV

    1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 3s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor
    2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    3.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    4.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    5.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    6.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    7.Suitable for T-REX 450E series.

    Specification:

    • Input voltage:3S
    • Max continuous current:46A/68A(5sec)
    • Max output power:Approx. 500w/730W(5sec)
    • KV value:3200KV
    • Dimension:spindle 3.5x29.2x38mm
    • Weight:Approx. 87g
    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(Φ2.6XΦ5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set
    SKU: HML46M02T
    €58.00
    inc. VAT

     72HR STOCK
  • Align T-Rex 150 Main Motor set

    Align T-Rex 150 Main Motor set

    Align T-Rex 150 Main Motor set

    • KV value: 8200KV
    • Input voltage: 2S
    • Stator Arms: 9
    • Magnet Poles: 6
    • Dimension: 1.5x13.7x21mm
    • Weight: 6.5g

    Accessories:

    • Main Motor set x 1
    • Socket Button Head Screw x 2(#0-80x3mm)
    SKU: HML15M01
    €20.99
    inc. VAT

     72HR STOCK
  • Avizar Multicopter Motor MC2810-950KV, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC2810-950KV, fits 400-500 size models, 4-6S

    MC2810-950kv is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms 

    Fits Spyder Little, F550, and many others.

    As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    - Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    - Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

    Specifications:

    •   No-load speed: 950 KV
    •   Load current: 27 Amps
    •   Max Watts : 400w
    •   No load current: 0.7 Amps
    •   Japan NMB bearings
    •   Weight: 60gr
    •   Motor Diameter :35 mm
    •   Recommended Battery: 4-6 S
    •   Propellers to use: from 9-11"

    Included:

    •   MC2810 motor.
    •   Propeller mount with screws, Nut and Cup.

    Sample testing data is below.

    Volts-14.8  4S Amps Watts Torque-gr
    Prop- Graupner 10x5 1 13 120 gr
      4 57 395 gr
      10 143 850 gr
      16 230 1200 gr
    Volts-14.8 4S Amps Watts Torque
    Prop- Graupner 11x5 1 13 143 gr
      4 57 410 gr
      10 143 930 gr
      16 230 1350 gr
    SKU: MC2810-950KV
    €32.00
    inc. VAT

  • Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    MC2834-1100kv is a high torque motor especially developed for the 450 CLASS  Multi-rotors platforms 

    Note- for those who want to fly Acrobatic Quads, or Speed model: 6S configuration with  7-9" prop, you will get a LOT of speed, up to 140 km/h. we recommend it only for those who experienced in FPV or Quads flying.

    Fits Spyder Little, F550, and many others.

    The big advantage that it can be used with 8-10" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    2- Heat, 25% lower heat generation thanks to ceramic bearings.

    3- Japanese NMB bearings, highest resistance to vibrations.

    4- 40cm cables, will allow direct connection to esc, wherever located.

    Specifications:

    •   No-load speed: 1100KV
    •   Load current: 22 Amps
    •   No load current: 0.8 Amps
    •   Long cables (40cm)
    •   Japan NMB bearings
    •   Weight: 81gr
    •   Motor Diameter :28.5 mm
    •   Recommended Battery: 4-6S
    •   Propellers to use: from 8-10"

      Included:

      MC2834 motor, 40cm wires
      Propeller mount with screws, Nut and Cup.

    Example test data

    Voltage (V) Prop (inch) Load current(A) Power(W) Thrust(G) Efficiency (G/W)
        11.1V      10*6          19,8    219,78    1000          4,55

     

    SKU: MC2834-1100
    €29.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    New version availiable,. replacing this 930KV, improoved stator, better performance.
    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S Will be delivered instead.

    SKU: MC3525-930
    €29.00
    inc. VAT

  • Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    MC3525-950KV is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms THIS Motor is a tuning V2 version for the older motor 3525-930kv

    Fits Spyder Little, F550, and many others.

    As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    - Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    - Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

    Specifications:

    •   No-load speed: 950 KV
    •   Load current: 22 Amps
    •   Max Watts : 325
    •   No load current: 0.8 Amps
    •   Japan NMB bearings
    •   Weight: 60gr
    •   Motor Diameter :35 mm
    •   Recommended Battery: 4-6 S
    •   Propellers to use: from 9-11"

    Included:

    •   MC3525 motor
    •   Propeller mount with screws, Nut and Cup.

    Sample testing data is below.

    Volts-14.8  4S Amps Watts Torque-gr
    Prop- Graupner 10x5 1 13 120 gr
      4 57 395 gr
      10 143 850 gr
      16 230 1200 gr
    Volts-14.8 4S Amps Watts Torque
    Prop- Graupner 11x5 1 13 143 gr
      4 57 410 gr
      10 143 930 gr
      16 230 1350 gr
    SKU: MC3525-950
    €29.00
    inc. VAT

     IN STOCK
  • BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

    BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

    Beam Brushless motor 4026-530KV, designed for most 550-600 models with up to 12s Lipos.Those motors are produced in Korea, make this product high quality motor.

    Specifications:

    • Motor KV - 530KV RPM/Volt
    • Stator Arms - 12
    • Magnet Poles - 10
    • Motor Timing - 5deg
    • Drive Frequency - 8kHz
    • Input Voltage : 3-12s
    • Max Continuous Current - 65A
    • Max Continuous Power - 2850W
    • Weight (g/oz) - 631g / 12.734oz
    • Shaft size : 6mm

     

     

    SKU: B4026-530
    €149.00
    inc. VAT

     IN STOCK
  • BL A2204-14 1400KV

    BL A2204-14 1400KV

    A2204-14 1400KV Outrunner Brushless Motor

    Those motors produced OEM by strict requierments: Extra Low Vibrations, Balanced core and outside corps, Thicker Wire- are just part of the features those motors comes with.

    They made especially for FPV/Multirotors products, however they can be used on other products as well.
    Benefit from Highest quality at the low price due the mass production.

    Model: 2204-14
    Motor size: Ф28*12mm
    Shaft size: Ф3.175mm
    Weight: 22g
    KV(rpm/v): 1400
    Max Power: 97W
    Battery: 2-3Li-Po
    Test Prop: 6030/7040
    Ri(M Ω): 0.270
    ESC(A): 10A

    SKU: RCTA2204-1400KV
    €19.00
    inc. VAT

     IN STOCK
  • BL Motor Set

    BL Motor Set

    1 x BL Motor
    2 x Motorscrew M3x6
    1 x Motor Pinon Gear 12T
    SKU: CH450-004
    €19.00
    inc. VAT

  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • Brushless electromotor EM-400/24

    Brushless electromotor EM-400/24

    Brushless electromotor for CH-46 - Brushless outrunner features:

    Weight: 76 g
    Measures: 35 x 31 mm (d x l)
    No. of cells: 6-10
    RPM/V: 1190
    Max. efficiency: 82 %
    Max. efficiency current: 6 - 15 A (>75 %)
    Current capacity: 22 A/60 s
    Shaft diameter: 4 mm
    SKU: MS-010
    €50.00
    inc. VAT

     LOW STOCK
  • Brushless Motor NHM-30-6P-EX - JR Forza 450EX

    Brushless Motor NHM-30-6P-EX - JR Forza 450EX

    Brushless Motor NHM-30-6P-EX for JR Forza 450EX

    SKU: JRH61927
    €74.50
    inc. VAT

     LOW STOCK
  • GTX-820 Brushless

    GTX-820 Brushless

    Solid aluminum construction.

    Suitable for the Formula-1 and other medium-sized and large racing and recreational craft..
    The shaft is adjustable tilt angle + 5 °, the height is about 12 mm. The electric motor is built using a water cooling.

    Specifications

    Length. 140 mm
    Width . 65 mm
    Height. 190 mm
    Weight. 600 g

    SKU: Graupner2380
    €212.00
    inc. VAT

     LOW STOCK
  • KDS Agile BL4020-1100KV Brushless Motor 550 Class

    KDS Agile BL4020-1100KV Brushless Motor 550 Class

    KDS BL4020-1100KV Brushless Motor For Agile 5.5 or other 550 class helicopter with 6S setup

    Specs:

    • Kv Value: 1100Kv
    • Number of Poles: 10P
    • Stator diameter: 41mm
    • Stator Thickness: 22mm
    • Stator-arm: 12
    • Coil number: 5 Turn Delta
    • No Load Current (lo/20v): 5.4A
    • Motor Resistance: 0.007Ω
    • The maximum continuous output current: 800A
    • Maximum continuous power: 1700W
    • Motor diameter: 50mm
    • Shaft diameter: 6.0mm
    • Motor length: 48.5mm
    • Temperature: «130 ℃
    • Peak temperature: «180 ℃
    • Correspondence ESC: »60A
    • Correspondence battery: Lipo 5-8s
    • Weight: 315g
    • Timing: 10
    SKU: BL4020-1100KV
    €159.00
    inc. VAT

  • Lynx Heli EOX Motor 2214-6S-2500KV

    Lynx Heli EOX Motor 2214-6S-2500KV

    Description:

    Lynx EOX brushless motors a new generation of high power, high efficiency helicopter motors.

    Our new EOX motors will open your eyes to performance.

    Developed by Lynx, these motors are perhaps the ultimate helicopter upgrade.

    Featuring a single wire coil assembly for the best in efficiency, power and cool running.

    High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.

    The EOX-2214 motor is the ultimate powerhouse for 300 class heli.

    Specificaly designed for Tareq and his Oxy3, the 6S-2500KV edition is designed to increase the Max Output Power and work with 6S.

    The high quality of all components and material used, as the choice of a special single wire rewind system grade this motor as a Limited Edition

    We introduce 3 Radial Bearign shaft supportand 100% Factory fine motor balancing for the ultimate motor consistency and vibe free.

    Overall dimension was designed to fit in the standard frame without touch battery or servo.

    EOX 2214 is sale with standard cable connector plugs.

    So the next time you want to upgrade your helicopter – think Lynx EOX!

    Technical Specification:

    • Motor Kv     2500KV
    • Max Lipo Cell     6s  (22.2 MAX INPUT VOLT)
    • Stator Diameter     22 mm
    • Stator Length     14 mm
    • No. of Stator Arms     9
    • No. Magnet Poles     6
    • Single Wire Diam.     0.40 mm
    • Max Continuous Current     30A
    • Max Continuous Power     666W
    • Weight     59.5g - with wire and pin
    • Outside Diameter     28 mm
    • Body Length     22.3 mm
    • Shaft Diameter     4mm - 3 Bearign Support
    • Pinion Shaft Diameter     3,17 mm - With Lock Surface
    • Overall Shaft Length     46.7 mm
    • Motor Timing     5deg
    • Drive Frequency     8kHz

    Packing List:

    • 1 x EOX 2214-6S-2500KV Motor with preinstalled conector plug
    • 4 x Hex Cup Screw M3x8
    SKU: LX8006
    €58.00
    inc. VAT

     72HR STOCK
    NEW
  • Lynx Heli EOX Motor 2222-3/4S-3900KV

    Lynx Heli EOX Motor 2222-3/4S-3900KV

    Description:

    Lynx EOX brushless motors a new generation of high power, high efficiency helicopter motors.

    Our new EOX motors will open your eyes to performance.

    Developed by Lynx, these motors are perhaps the ultimate helicopter upgrade.

    Featuring a single wire coil assembly for the best in efficiency, power and cool running.

    High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.

    The EOX-2222 motor is the ultimate powerhouse for 450 class heli. The 3/4S-3900KV edition is designed to increase the Max Output Power and work with 3/4S.

    The high quality of all components and material used, as the choice of a special single wire rewind system grade this motor as a Limited Edition

    We introduce 3 Radial Bearign shaft supportand 100% Factory fine motor balancing for the ultimate motor consistency and vibe free.

    Overall dimension was designed to fit in the standard frame without touch battery or servo.

    EOX 2222 is sale with standard cable connector plugs.

    So the next time you want to upgrade your helicopter – think Lynx EOX!

    Technical Specification:

    • Motor Kv     3900KV
    • Max Lipo Cell     3/4s  (16.8 MAX INPUT VOLT)
    • Stator Diameter     22 mm
    • Stator Length     22 mm
    • No. of Stator Arms     9
    • No. Magnet Poles     6
    • Single Wire Diam.     0.40 mm
    • Max Continuous Current     55A
    • Max Continuous Power     850W
    • Weight     84g - with wire and pin
    • Outside Diameter     28 mm
    • Body Length     30.3 mm
    • Shaft Diameter     4mm - 3 Bearign Support
    • Pinion Shaft Diameter     3,17 mm - With Lock Surface
    • Overall Shaft Length     55 mm
    • Motor Timing     5deg
    • Drive Frequency     8kHz

    Packing List:

    • 1 x EOX 2222-3/4S-3900KV Motor with preinstalled conector plug
    • 4 x Hex Cup Screw M3x5
    • 4 x Hex Cup Screw M3x8
    SKU: LX8007
    €59.99
    inc. VAT

     72HR STOCK
    NEW
  • Lynx Heli EOX Motor 2222-6S-1970KV

    Lynx Heli EOX Motor 2222-6S-1970KV

    Description:

    Lynx EOX brushless motors a new generation of high power, high efficiency helicopter motors.

    Our new EOX motors will open your eyes to performance.

    Developed by Lynx, these motors are perhaps the ultimate helicopter upgrade.

    Featuring a single wire coil assembly for the best in efficiency, power and cool running.

    High temperature rating Neodymium magnet and high quality material and component graduate EOX motor by Lynx a Limit Edition.

    The EOX-2222 motor is the ultimate powerhouse for 450 class heli. The 6S-1970KV edition is designed to increase the Max Output Power and work with 6S.

    The high quality of all components and material used, as the choice of a special single wire rewind system grade this motor as a Limited Edition

    We introduce 3 Radial Bearign shaft supportand 100% Factory fine motor balancing for the ultimate motor consistency and vibe free.

    Overall dimension was designed to fit in the standard frame without touch battery or servo.

    EOX 2222 is sale with standard cable connector plugs.

    So the next time you want to upgrade your helicopter – think Lynx EOX!

    Technical Specifications:

    • Motor Kv     1970KV
    • Max Lipo Cell     6s  (22.2 MAX INPUT VOLT)
    • Stator Diameter     22 mm
    • Stator Length     22 mm
    • No. of Stator Arms     9
    • No. Magnet Poles     6
    • Single Wire Diam.     0.40 mm
    • Max Continuous Current     40A
    • Max Continuous Power     870W
    • Weight     81g - with wire and pin
    • Outside Diameter     28 mm
    • Body Length     30.3 mm
    • Shaft Diameter     4mm - 3 Bearign Support
    • Pinion Shaft Diameter     3,17 mm - With Lock Surface
    • Overall Shaft Length     55 mm
    • Motor Timing     5deg
    • Drive Frequency     8kHz

    Packing List:

    • 1 x EOX 2222-6S-1970KV Motor with preinstalled conector plug
    • 4 x Hex Cup Screw M3x5
    • 4 x Hex Cup Screw M3x8
    SKU: LX8008
    €59.99
    inc. VAT

    NEW
  • Motor Shaft for Avizar motor 28XX

    Motor Shaft for Avizar motor 28XX

    Motor Shaft for Avizar motors

    SKU: AVIZ2822
    €2.00
    inc. VAT

     IN STOCK

Manufacturers

Back