Beam Helicopters

Beam Helicopters

Beam helicopters produced in Korea, they are known worldwide as best products in range

Products


  •  Swashplate Assembly

    Swashplate Assembly

    Beam Swashplate Assembly
    SKU: BMH421201
    €39.00
    inc. VAT

     LOW STOCK
  •  Tail Center Hub

    Tail Center Hub

    Tail Center Hub: E4

    SKU: BMH421423
    €3.00
    inc. VAT

     IN STOCK
  • Antirotation

    Antirotation

    Antirotation
    SKU: BA-05014
    €4.50
    inc. VAT

     72HR STOCK
  • Antirotation Plate

    Antirotation Plate

    BMH421123 - Antirotation Plate

    SKU: BMH421123
    €3.80
    inc. VAT

     IN STOCK
  • Ball Link Set

    Ball Link Set

    Ball Link Set

    SKU: BA-02011
    €7.00
    inc. VAT

     LOW STOCK
  • Ball Link Set

    Ball Link Set

    Ball Link Set 18pcs

    SKU: BMH423013
    €3.90
    inc. VAT

     IN STOCK
  • Battery Mount Plate

    Battery Mount Plate

    BMH421106 - Battery Mount Plate w/Hardware

    SKU: BMH421106
    €9.00
    inc. VAT

     IN STOCK
  • Battery Mount Plate, Foam: E4-A

    Battery Mount Plate, Foam: E4-A

    Battery Mount Plate, Foam: E4-A

    SKU: BMH425014
    €6.00
    inc. VAT

     IN STOCK
  • BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

    BEAM 4026-530 KV Brushless Motor for 550-600 class helicopters

    Beam Brushless motor 4026-530KV, designed for most 550-600 models with up to 12s Lipos.Those motors are produced in Korea, make this product high quality motor.

    Specifications:

    • Motor KV - 530KV RPM/Volt
    • Stator Arms - 12
    • Magnet Poles - 10
    • Motor Timing - 5deg
    • Drive Frequency - 8kHz
    • Input Voltage : 3-12s
    • Max Continuous Current - 65A
    • Max Continuous Power - 2850W
    • Weight (g/oz) - 631g / 12.734oz
    • Shaft size : 6mm

     

     

    SKU: B4026-530
    €149.00
    inc. VAT

     IN STOCK
  • Beam 450 DFC Flybarless Head Set

    Beam 450 DFC Flybarless Head Set

    This is a Complete set of  Beam Flybarless Head, and is intended for use with the All Beam E4 450 models.

    DFC head is most acrobatic rigid head today in the market.

    SKU: E4-9043
    €69.90
    inc. VAT

     72HR STOCK
  • Beam 450 Flybarless Head Set

    Beam 450 Flybarless Head Set

    This is a Complete set of  Beam Flybarless Head, and is intended for use with the All Beam E4 450 models.

    Normal Flybarless head is for those who like the sport flying

    SKU: E4-9042
    €69.90
    inc. VAT

     LOW STOCK
  • Beam 450 SE Tail Shaft (4)

    Beam 450 SE Tail Shaft (4)

    Beam Tail Shaft, for SE version only, 4 pcs in set

    SKU: E4-9022
    €6.60
    inc. VAT

     IN STOCK
  • Beam Autorotation Case

    Beam Autorotation Case

    Beam Autorotation Case, all versions
    SKU: BMH421211
    €9.00
    inc. VAT

  • Beam Autorotation Case Advance

    Beam Autorotation Case Advance

    Beam Autorotation Case, for beam E4 Advance
    SKU: BMH425006
    €9.00
    inc. VAT

     LOW STOCK
  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

     IN STOCK
    SALE
  • Beam Blade Holder Guide Set FBL

    Beam Blade Holder Guide Set FBL

    This is a replacement Beam Blade Holder Guide Set, and is intended for use with the Beam E4 V2 Advance 450 class helicopter

    SKU: E4-5055
    €8.00
    inc. VAT

     IN STOCK
  • Beam Control Rod Set (2)

    Beam Control Rod Set (2)

    Beam Control Rod Set (2)

    SKU: BMH425054
    €5.00
    inc. VAT

     IN STOCK
  • Beam E4 - Tail Control Rod Set

    Beam E4 - Tail Control Rod Set

    Beam E4 - Tail Control Rod Set

    SKU: BMH421443
    €11.90
    inc. VAT

     IN STOCK
  • Beam E4 450 size Autorotation One-way Sleeve

    Beam E4 450 size Autorotation One-way Sleeve

    Beam 450 Autorotation One-way Sleeve, 2 pcs in set

    SKU: BMH421214
    €4.20
    inc. VAT

     IN STOCK
  • Beam E4 450 size Tail Pulley (x2)

    Beam E4 450 size Tail Pulley (x2)

    Beam E4 450 size Tail Pulley (2pcs),

    Fits Beam  E4 version 402 and Advance

    SKU: BMH421403
    €7.80
    inc. VAT

     IN STOCK
  • Beam E4 Advance SE 450 Flybarless Helicopter Kit

    Beam E4 Advance SE 450 Flybarless Helicopter Kit

    This is the Beam E4 Advance SE 450 Flybarless Helicopter Kit. A slop free CNC rotor head and control system, combined with a unique upright rubber tail servo mount system provides precise control that rivals any 450 size machine on the market. A simple frame design provides full support with two vertically stacked pieces of carbon fiber, high quality aluminum blocks, cross members and boom mounts, as well as carbon fiber trays. Additionally, the SE includes a redesigned tail housing, the ability to choose either a standard flybarless head or a DFC type head, and a fully serviceable swash plate, making the E4 Advance SE a true contender in the 450 class market.

    Features:

    •   Includes parts for both standard flybarless and DFC type heads depending on pilots flying style
    •   Main shaft for both standard and DFC head types
    •   Non breakable main grip with 3 ball bearing + thrust bearing type vantage
    •   Red swash cap addition
    •   Re-designed tail housing addition
    •   Metal tail control system addition
    •   Now detachable shaft + pulley instead of inseparable previous shaft+pulley set
    •   Re-designed boom brace mount addition
    •   Boom brace connector much longer than previous addition
    •   Re-designed frame addition
    •   Metal tail servo mount for standard and mini size type servo mounting
    •   Innovative design allows for reduced weight, easy servicing and low parts count
    •   Durable Canopy with aerodynamic design
    •   Fully serviceable CNC swash plate
    •   Robust carbon fiber frames
    •   Ultra quiet direct drive tail system

    Specifications:

    • Length: 660mm (26")
    • Height: 218mm (8.58")
    • Main Rotor Diameter: 723mm (28.46")
    • Tail Rotor Diameter: 150mm
    • Main Drive Gear: 150T
    • Main Drive Pulley: 51T
    • Motor Pinion: 11T or 13T
    • Gear Ratio: 1:13.6x4.25 or 1:11.5x4.25
    • Weight Less Power System: 645g (22.75oz)

    Needed to Complete:

    •   Transmitter & Receiver
    •   Servos
    •   Flybarless controller
    •   Electronic Speed Controller & Motor
    •   Lipo Battery
    •   Battery Charger
    •   Tools
    SKU: E4-SE100
    €249.00
    inc. VAT

     IN STOCK
  • Beam E4 DFC Control Rod Lever

    Beam E4 DFC Control Rod Lever

    Beam E4 DFC Control Rod Lever

    SKU: E4-9013
    €20.00
    inc. VAT

     IN STOCK
  • Beam E4 DFC Control Rod Lever Mount SE

    Beam E4 DFC Control Rod Lever Mount SE

    Beam E4 DFC Control Rod Lever Mount SE

    SKU: E4-9009
    €11.90
    inc. VAT

     IN STOCK
  • Beam E4 FBL Blade Holders

    Beam E4 FBL Blade Holders

    FBL Upgraded (SE) type blade holders for all FBL heads.
    SKU: E4-8001
    €38.00
    inc. VAT

     72HR STOCK

Manufacturers