Beam Helicopters

Products


  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

     IN STOCK
    SALE
  • Beam E4 Advance SE 450 Flybarless Helicopter Kit

    Beam E4 Advance SE 450 Flybarless Helicopter Kit

    This is the Beam E4 Advance SE 450 Flybarless Helicopter Kit. A slop free CNC rotor head and control system, combined with a unique upright rubber tail servo mount system provides precise control that rivals any 450 size machine on the market. A simple frame design provides full support with two vertically stacked pieces of carbon fiber, high quality aluminum blocks, cross members and boom mounts, as well as carbon fiber trays. Additionally, the SE includes a redesigned tail housing, the ability to choose either a standard flybarless head or a DFC type head, and a fully serviceable swash plate, making the E4 Advance SE a true contender in the 450 class market.

    Features:

    •   Includes parts for both standard flybarless and DFC type heads depending on pilots flying style
    •   Main shaft for both standard and DFC head types
    •   Non breakable main grip with 3 ball bearing + thrust bearing type vantage
    •   Red swash cap addition
    •   Re-designed tail housing addition
    •   Metal tail control system addition
    •   Now detachable shaft + pulley instead of inseparable previous shaft+pulley set
    •   Re-designed boom brace mount addition
    •   Boom brace connector much longer than previous addition
    •   Re-designed frame addition
    •   Metal tail servo mount for standard and mini size type servo mounting
    •   Innovative design allows for reduced weight, easy servicing and low parts count
    •   Durable Canopy with aerodynamic design
    •   Fully serviceable CNC swash plate
    •   Robust carbon fiber frames
    •   Ultra quiet direct drive tail system

    Specifications:

    • Length: 660mm (26")
    • Height: 218mm (8.58")
    • Main Rotor Diameter: 723mm (28.46")
    • Tail Rotor Diameter: 150mm
    • Main Drive Gear: 150T
    • Main Drive Pulley: 51T
    • Motor Pinion: 11T or 13T
    • Gear Ratio: 1:13.6x4.25 or 1:11.5x4.25
    • Weight Less Power System: 645g (22.75oz)

    Needed to Complete:

    •   Transmitter & Receiver
    •   Servos
    •   Flybarless controller
    •   Electronic Speed Controller & Motor
    •   Lipo Battery
    •   Battery Charger
    •   Tools
    SKU: E4-SE100
    €249.00
    inc. VAT

     IN STOCK
  • Beam Helicopter E4 Special Edition 450 SE FBL Combo

    Beam Helicopter E4 Special Edition 450 SE FBL Combo

    This is the Beam E4 Advance SE 450 Flybarless Helicopter combo. A slop free CNC rotor head and control system, combined with a unique upright rubber tail servo mount system provides precise control that rivals any 450 size machine on the market. A simple frame design provides full support with two vertically stacked pieces of carbon fiber, high quality aluminum blocks, cross members and boom mounts, as well as carbon fiber trays. Additionally, the SE includes a redesigned tail housing, the ability to choose either a standard flybarless head or a DFC type head, and a fully serviceable swash plate, making the E4 Advance SE a true contender in the 450 class market.

    Head

    • Choice between Flybarless Normal (Standard) and DFC types-depending on ones invidual flying style(contains both FBL Normal & DFC Head set)
    • Main shaft for both Standard & DFC Head types.
    • Non breakable Main Grip 3ball bearing + Thrust bearing type vantage.
    • Red Swash Cap addition.

    Tail

    • Newly designed Tail Housing addition.
    • Metal Tail Control system addition.
    • Now Detachable Shaft + Pulley (instead of inseparable previous shaft+pulley set)
    • Newly designed Boom Brace Mount addition.
    • Boom Brace Connector (much longer than the previous one)

    Frame

    • Newly designed Frame addition.
    • Metal Tail Servo Mount for Standard/Mini (Savox 1350 type) & Mini size type servos mounting

    Included:

    • Beam SE 450 Kit with SWE Main carbon Blades
    • Scorpion Motor 2221-8
    • 40amp esc for helis, e.g Hobbywing or equal
    • 3 Cyclic servos Align or Savox
    • 1 Tail servo Align or Savox
    • FBL unit Microbeast ( possible to change to other choices)

    Need to be completed:

    • Radio TX-RX
    • Flybarles System
    • Lipo battery  3s 2200

    Specifications:

    • Length: 660mm (26")
    • Height: 218mm (8.58")
    • Main Blade Length: 325mm
    • Main Rotor Diameter: 723mm (28.46")
    • Weight (less power system): 645g (22.75OZ)
    • Main Gear: 150T
    • Main Drive Pulley: 51T
    SKU: BEAM450SEcombo
    €450.00
    inc. VAT

     LOW STOCK

Manufacturers

Back