AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • 2-Axis Gimbal Tilt-Roll Camera servo operated Mount Kit

    2-Axis Gimbal Tilt-Roll Camera servo operated Mount Kit

    2-Axis Tilt-Roll Camera Mount Kit built to accommodate  most medium size SLR-like camera. up to 145m wide
    This kit includes an universal adapter plate. low cost, operated by servo. You can through simple modifications to fix it anywhere.

    Features:

    •     2-axis controllable.
    •     Fit for most medium size SLR-like camera.
    •     Build-in adjustable remote control shutter.  
    •     Fit for most RC aero vehicles via easily modify. (see the picture of mounting plate dimation)
    •     Light weight: 150g (without servos)

    Package content:

        Unassembled 2-Axis Tilt-Roll Camera Mount Kit x 1

    Requirement:

    •     Mini size servo
    •     Gyro or stabilizer (Option)

     

    SKU: 58001004
    €99.00
    inc. VAT

     IN STOCK
  • 2-Axis Nex-GH5 Series Brushless Gimbal with controller

    2-Axis Nex-GH5 Series Brushless Gimbal with controller

    Brushless Gimbal For Nex / GH camera type, 2-Axis
    Included with 2 axis controller, allow this gimbal to work independent  regardless the drone its installed on.
    can be also mounted on manual handle.
    Vibrations isolation dampening pad is included.

    • All CNC aluminum alloy manufactured;
    • Brushless motor direct drive;
    • Camera Types: support Midi SLR- such as Sony Nex, Panasonic GHx
    • Included two Brushless gimbal motors
    • Gimbal weight: +-310g without motors
    • Brushless controller 2 axis
    SKU: ASPGIMBAL
    €379.00
    inc. VAT

     72HR STOCK
  • 3-Axis Aerial  DSLR Brushless Gimbal with Alexmos controller- Demo model

    3-Axis Aerial DSLR Brushless Gimbal with Alexmos controller- Demo model

    3-Axis Aerial Version DSLR Brushless Gimbal for large SLR cameras such Canon D5, D800, fit other SLRs as well

    this is a demo model, it was only used for demo purpose, but never used. comes assembled.

    Included with Alexmos 3 axis controller, allow this gimbal to work independent  regardless the drone or application its installed on.
    can be also mounted on manual handle.
    Large Vibrations isolation dampening pad is included.

    The Gimbal’s tri-axial rotating parts are made of aluminum , on large flange bearings to reduce the stress on the motor, allowing the motors to rotate smoothly.

    Three high-power  professional Gimbal motors. The Yaw Axis motor shaft is hollow shaft, allowing wiring through the middle of the motor, reducing twisting during continuous rotation. The motor’s center hole diameter is 12.5 mm, allows 12 wire Slip ring installation.

    The Gimbal tube clamps are made of 25mm diameter made from FR-PA thermal injection molded plastic. These  clamps have very good elasticity and grip strength while holding carbon tubes, avoiding slips, and scratching the carbon tubes.

    Brushless motor direct drive;

    • Gimbal Size: 290*241*349mm  
    • Weight:1600g    
    • Max Load: 3KG

       Included:

       
    • Gimbal set, with Dampening and accessories
    • 3 Brushless Motors 
    • Alexmos 3-axis gimbal controller

    SKU: DSLRGIMBAL
    €489.00
    inc. VAT

     LOW STOCK
  • 3D Reversible ESC Prop 8x4 Carbon Composite propeller set CW & CCW

    3D Reversible ESC Prop 8x4 Carbon Composite propeller set CW & CCW

    3D Reversible ESC Prop-8x4 Carbon Composite propeller pair CW & CCW, Perfect for Invertix and other 3D quads.

    Set of 4 Carbon composite 8 x 4" propellers in black ( 2 x cw, 2 x ccw).

    These propellers are very special as each side of the propeller has a 4.5" pitch so if you are running reversible esc's you can fly 3D maneuvers and maintain upside down flight. The propellers have a 5mm mounting hole. These propellers are very stiff and light and have amazing balance. They are ideal for acrobatic flying and 3D flying.
     

    Contains 4 Reversible ESC Props

    • These props are ideal for multi rotors with reversible ESC's and enables 3D flying.
    • Do not include prop adapters
    • 5mm hole size

     

    SKU: REVESC8045
    €12.00
    inc. VAT

     LOW STOCK
  • 3M Gyro Mounting Pads adjesive 2.5mm (3pcs)

    3M Gyro Mounting Pads adjesive 2.5mm (3pcs)

    3m Gyro Pads

    These 3M high quality Gyro and receiver mounting pads are double sided tape which is used to both securely hold the gyro in place but just as importantly act as a dampener between the frame and the gyro. MADE from 3M material, with 2.5mm of thickness, 3 pcs in a set
    This allows for shock absorption from the Helicopters natural vibration.
    Each pad is cushioned to help to eliminate vibration

    SKU: 3MPADS
    €3.00
    inc. VAT

     IN STOCK
  • 3s Lipo Balance Extension Lead (JST-XH) 30cm

    3s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 3s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

    SKU: 3SBALEXT
    €2.50
    inc. VAT

     IN STOCK
  • 4s Lipo Balance Extension Lead (JST-XH) 30cm

    4s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 4s Lipo Balance Extension Lead (JST-XH) 30cm This extension made from 24awg cable. produced in Germany

    SKU: 4SBALEXT
    €2.60
    inc. VAT

     IN STOCK
  • 5.8G 32CH Wireless RF Power Adjustable AV Transmitter

    5.8G 32CH Wireless RF Power Adjustable AV Transmitter

    5.8G 32CH Wireless RF Power Adjustable AV Transmitter,
    When you fly in POWER restricted countries, you can use as low output as 25mw, and allow to change the power when flying abroad or in Non restricted countries:
    ( Please check always the local regulations for maximum allowed transmission power ), we sell this product for use Out of Belgium

    LCD display,frequency and channel asynchronous display.
    RF power output 8 step adjustable(25/50/100/200/400/500/600/800mW)
    Large input voltage range

    Specification:
     

    • Transmitting Frequency:ISM 5.6GHz-5.95GHz 32CH
    • Operating Voltage: +6.0V~+25.0V
    • Supply Current: 450mA/800mW/12V
    • Video Input Level: 1V±0.2Vp-p/75Ω
    • Audio Input Level: 0.5~2.0Vp-p/10KΩ
    • TV System: PAL/NTSC/SECAM(AUTO)
    • RF Output Power: 8 step adjustable(25/50/100/200/400/500/600/800mW)
    • Antenna Connector: SMA Connector
    • Operating Temperature: -10℃~+85℃
    • Weight:35g
    • Dimensions(L x W x H):50 x 37 x 17mm
    • Cable to Go -pro included.
    SKU: FT956
    €99.00
    inc. VAT

     IN STOCK
  • 5.8GHz Spiro Circular Polarized Antenna Set SMA

    5.8GHz Spiro Circular Polarized Antenna Set SMA

    Hot of the press, literally, the Circularly Polarized SpiroNet antennas are without doubt the best replacement available for your stock whip antennas. Manufactured to extremely high tolerances and 100% tested on a Rhode & Schwartz analyzer, these antennas yield unparalleled results when compared to hand made variants or DIY antennas.

    Left-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Antennas include standard SMA connector. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance. 

    Specifications:

    • Clover (TX) weight: 7.7g
    • Skew (RX) Weight: 8.6g
    • Connector: SMA 
    • Case size: 33.5m(w) 16mm(h)
    • Cable Length: 73mm(skew) 33.5mm(clover)

     

    SKU: Spiro58D
    €18.00 €22.00
    inc. VAT

     IN STOCK
  • 5s Lipo Balance Extension Lead (JST-XH) 30cm

    5s Lipo Balance Extension Lead (JST-XH) 30cm

    JST-XH 5s Lipo Balance Extension Lead (JST-XH) 30cm
    This extension made from 24awg cable. produced in Germany
    SKU: 5SBALEXT
    €2.80
    inc. VAT

     IN STOCK
  • 9X3.8 E Propeller

    9X3.8 E Propeller

    Composit Prop 9X3.8 Electro

    Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
    Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

    - Composite Propeller
    - Suitable GP & EP

    SKU: RCT9X3.8E
    €1.80
    inc. VAT

     IN STOCK
  • 9X4.7 E PropelleR

    9X4.7 E PropelleR

    Composit Prop 9X4.7 Electro

    Hub Adaptors are included, to fit to 3.17mm, 4mm, 5mm, 6mm, 6.5mm, 8 mm.
    Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.

    - Composite Propeller
    - Suitable GP & EP

    SKU: RCT9X4.7E
    €1.80
    inc. VAT

     LOW STOCK
  • ABS Spacer for Sky hero tuning

    ABS Spacer for Sky hero tuning

    This is the ABS material Spacer for Sky hero machines. it is higher (40mm) and usually used with Clamp (avclamp) as a set.

    1 Spacer is in the set

    SKU: AVSPACER
    €6.90
    inc. VAT

     IN STOCK
  • Aligator connector

    Aligator connector

    Alligator Connectors. Black+ Red

    SKU: AV1324
    €1.50
    inc. VAT

     IN STOCK
  • Alloy Hub Jet Wheel 58mm

    Alloy Hub Jet Wheel 58mm

    Alloy Hub Jet Wheel 58mm
    Diameter: 58mm
    Tyre height: 20mm
    Axel Size: 5mm
    Wheel comes with 2 brass fittings to hold the wheel onto the axel and allow for free spin.
    Well crafted and precise wheels

    SKU: SKU47583
    €9.90
    inc. VAT

     IN STOCK
  • Alloy Hub Jet Wheel 63mm

    Alloy Hub Jet Wheel 63mm

    Alloy Hub Jet Wheel 63mm
    Diameter: 63mm
    Tyre height: 20mm
    Axel Size: 5mm
    Wheel comes with 2 brass fittings to hold the wheel onto the axel and allow for free spin.
    Well crafted and precise wheels.

    SKU: SKU47584
    €10.50
    inc. VAT

     IN STOCK
  • Alloy Pushrod with Ball-Link 65mm

    Alloy Pushrod with Ball-Link 65mm

    Alloy Pushrod with Ball-Link 65mm

    Rod = 65mm
    Ball Link = 27mm x M3

    SKU: AY016034
    €2.90
    inc. VAT

     IN STOCK
  • Alu Adjustable Control Horns

    Alu Adjustable Control Horns

    Alu Adjustable control horns with ball link and hardware.

    Dimension

    • M4×40mm
    • 1 set incl 1 horn with hardware

    SKU: AV007-03203
    €3.00
    inc. VAT

     IN STOCK
  • Aluminium Heatsink Heat Sink Cooling Cooler Fin 20x14x6mm VTX, ESC

    Aluminium Heatsink Heat Sink Cooling Cooler Fin 20x14x6mm VTX, ESC

    This is a special Heat Sink to cool down your VTX or ESC.
    Reduce the temprature to keep your component safe.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it directly over the electronic components since it might shortcut

    Material : Aluminum
    Sizes 20 x 14 x 6mm
    Weight: 2.3 gr
    1 pcs included in package

    SKU: HS20146
    €3.20
    inc. VAT

     IN STOCK
  • Aluminium Heatsink Heat Sink Cooling Cooler Fin 25x24x16mm  VTX, ESC

    Aluminium Heatsink Heat Sink Cooling Cooler Fin 25x24x16mm VTX, ESC

    This is a special Heat Sink to cool down your VTX or ESC.
    Reduce the temprature to keep your component safe.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it directly over the electronic components since it might shortcut

    Material : Aluminum
    Sizes 24x25mm
    Weight: 5.2gr
    1 pcs included in package

    SKU: HS252416
    €3.60
    inc. VAT

     IN STOCK
  • Aluminum Ball link M3, silver (2pcs)

    Aluminum Ball link M3, silver (2pcs)

    Aluminum Ball link, M3 tread, 26mm long. Made for screw of M3 throw the ball.

    2 pcs in a set, Silver color

    SKU: AV023-01301A
    €5.00
    inc. VAT

     IN STOCK
  • Aluminum Heatsink For Video transmitter VTX 11x10x6mm

    Aluminum Heatsink For Video transmitter VTX 11x10x6mm

    This is a special Heat Sink to cool down your VTX.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it over the electronic components since it might shortcut

    Material : Aluminum
    Size 11x10x6mm
    Weight: 1gr
    1 pcs included in package

    SKU: HS11106
    €3.00
    inc. VAT

     IN STOCK
  • Aluminum Heatsink For Video transmitter VTX 14x14x6mm

    Aluminum Heatsink For Video transmitter VTX 14x14x6mm

    This is a special Heat Sink to cool down your VTX.

    Video transmitters known to be hot due the small cooling surface.This heatsink is the solution to reduce the temperature of the VTX and keep it long life. just glue it over the VTX where the heat comes from and its done. glue must be heat conducting or just attach it well that it touching the hot surface of vtx (metal plate part)

    Dont place it over the electronic components since it might shortcut

    Material : Aluminum
    Size 14x14x6mm
    Weight: 1.1gr
    1 pcs included in package

    SKU: HS14146
    €3.00
    inc. VAT

     IN STOCK
  • Aluminum Multi-function Universal Soldering Station Insulation

    Aluminum Multi-function Universal Soldering Station Insulation

    Aluminum Multi-function Universal Soldering Station Insulation

    Fits XT60/XT90/DEANS/Banana GOLD from 2.4 to 10.4mm

    Specifications:

    • Color: Red
    • Length of Screws: 24mm
    • Weight: 132g
    • Screws: 5.3g
    SKU: TOOL001
    €19.90
    inc. VAT

     IN STOCK

Manufacturers