Receivers

Receivers

 Receivers for Radios , Spektrum, Futaba, Hitec, Webra

Products


  •  JETI Central Box CB100

    JETI Central Box CB100

    JETI Central Box CB100

    The Central Box 100 is a switchboard designed for the complete management of servos in a model with on emphasis on safety.
    The Central Box has a unique design did Provides overload protection at each servo output.
    The Central Box can manage a single battery and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected to the Central Box. With JETI DC / DS transmitter, the full potential of the Central Box kann used, examined as an easy way to configure the Central Box, EX telemetry, and very fast servo response.
    Central Box 100 supports up to 8 protected servo outputs and a single battery input.

    Attributes:

    • Overload protection on each channel
    • Possibility to connect up to 2 receivers with serial interface (PPM, EX bus)
    • Built-in expander function for up to 3 sensors
    • MPX battery input connectors: 1x
    • 100Hz mode of servo outputs (10ms period)
    • Supports EX telemetry (voltage, current, capacity, and temperature measurement, overload indication, ...)
    • Easy settings changes via DC / DS transmitter
    • Firmware updates by user
    • Suitable for use with high voltage (HV) servos
    • Compact size for easy installation
    • Each output is Individually configurable (channel assignment, trim, reverse, A TV)

     

    SKU: J-CB-100
    €118.90
    inc. VAT

     72HR STOCK
    NEW
  • DSMX Compatible Satellite Full Range Receiver

    DSMX Compatible Satellite Full Range Receiver

    DSMX Compatible Satellite Full Range Receiver

    Modulation: DSMX Compatible (Also DSM2 backward Compatible)
    Band: 2.4 GHz
    Dimension: 1.7(L) x 1.5(W) x 1(H) mm
    Weight: 2.5 gram
    Voltage Range: 3.3V from Receiver

    SKU: SPX71009
    €18.00
    inc. VAT

  • DSMX Remote Receiver (satellite)

    DSMX Remote Receiver (satellite)

    The remote receiver can be used as a replacement for any DSMX receiver that utilizes a remote receiver. It can also be used as an optional second remote receiver for the AR9010 or fourth remote receiver for the AR9110. The remote receiver includes one 24-inch extension; however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes.

    Additional remote receiver extensions are available in 6", 9", 12", 24" and 36" lengths. Always purchase products from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM2, DSMX or Spektrum.

    Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them.

    Specification:

    • Type: DSMX Remote Receiver
    • Modulation:DSMX Band: 2.400-2.4835GHz
    • Length:0.98 in (25mm)
    • Width:0.89 in (23mm)
    • Height:0.27 in (9mm)
    SKU: SPM9645
    €39.00
    inc. VAT

     LOW STOCK
  • FM800 Super Mini FASST Compatible 8ch Receiver with SBUS/CPPM

    FM800 Super Mini FASST Compatible 8ch Receiver with SBUS/CPPM

    The FM800 is the smallest and lightest FASST compatible receiver on the market today weighing only 2g.  The FM800 2.4GHz FASST compatible receiver is designed to work with FUTABA FASST 2.4GHz transmitters and is compatible with Futabas LBT protocol.
    It can output 8ch Sbus and 8ch CPPM and has been specially designed for the smallest applications such as micro quadcopters and in any application where a full range receiver is required.

    • The FM800 receiver includes a host of cables making connecting the receiver to most of todays moden flight controllers quick and easy.
    • Specs:
    • Operating Current: 50mA max
    • Operating Voltage: 3.6 ~8.4V
    • Latency: S.BUS mode:14mS @ FASST multi-channel mode, 16mS @ FASST 7ch mode
    • CPPM mode: 21mS @ FASST multi-channel mode, 24mS @ FASST 7ch mode
    • Sensitivity: Approx -90dBm
    • Weight: Approx 2g
    • Dimensions: 30 x 14 x 3mm
    • Output mode: S.BUS or CPPM can be selected
    • Number of channels: 8
    • Range: Approx 1km

    Includes:

    • FM800 Super Mini FAAST Compatible 8Ch Receiver
    • Cables
    SKU: KSFM800
    €36.00
    inc. VAT

     IN STOCK
  • FR-SKY X8R 8 channels ACCST S-BUS Recveiver with antenna PCB FR-SKY

    FR-SKY X8R 8 channels ACCST S-BUS Recveiver with antenna PCB FR-SKY

    FR-SKY X8R 8 channels ACCST S-BUS Recveiver with antenna PCB

    Specification:

    • SBUS Port (from 1 to 16 channels)
    • Smart Port (telemetry)
    • RSSI Port
    • PWM 8 channels
    • Posssibility of combine 2 X8R for 16 channels PWM (mode D16)
    • Size : 46.25x26.6x14.2mm
    • Wheight : 12.1g
    • Tension : 4.0V-10.0V
    • Amp use : 100mA
    • Range (>1.5km) 
    SKU: FRS-X8R
    €39.90
    inc. VAT

     LOW STOCK
  • FrSky Redundancy Bus - Dual Power Dual Receiver Double guarantee!

    FrSky Redundancy Bus - Dual Power Dual Receiver Double guarantee!

    Building redundancy in to our RC systems not only makes them safer but also helps to protect our investments.
    The FrSky Redundancy Bus brings an added measure of insurance and reliability to the FrSky RC system. It gives us the ability to integrate dual receivers and dual power supplies into our control systems. The result is then, that the Redundancy Bus (RB) has a spare control signal and a spare power supply to rely upon in the event of a malfunction.

    The RB also supports the S.Port telemetry system and its sensors as well as SBUS. Last but not least the RB monitors all 16 servo output channels for over current and over voltage conditions, and will limit those outputs to protect your servos in the case something goes awry.

    The Redundancy Bus comes with two, six pin power connectors and shrink tubing. Wiring the power connectors is pretty simple. If you look closely at the top of the supplied plugs you will see the plus and minus symbols for positive and negative polarity. Simply insert your power wire into the center of the three pins of either the plus or minus side and solder all three pins to that wire. The plugs are keyed so you cannot accidentally plug them in backwards.

    SKU: FRS-RED-BUS
    €79.00
    inc. VAT

     LOW STOCK
  • FrSky S.Port Tool Kit - STK

    FrSky S.Port Tool Kit - STK

    FrSky S.Port Tool Kit - STK

    The S.Port Tool Kit or STK allows configuration of the S6R receiver from your computer.

    SKU: FRS-STK
    €15.90
    inc. VAT

     IN STOCK
    NEW
  • FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

    FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

    FrSky S6R 6ch Receiver w/ 3-Axis Stabilization + Smart Port Telemetry

    FrSky has combined the popular FrSky receiver technology with a super stable 3-axis system for fixed wing aircraft.
    The S6R is based on the STM32 platform, with both receiver and flight control functions.
    The S6R includes a three-axis gyroscope and three-axis accelerometer sensor module, with settings that are programmable via FrSky radios or the PC configuration tool (with FrSky STK).
    Besides six-channel receiver function, the S6R also has stability augmentation, automatic level, crane, sideward flight, and shutdown functions of conventional airfoils.
    Delta wing (flying wing) and V-tail models only support stability augmentation, automatic level and shutdown functions.

    Features:

    • Built-in 3-axis gyro and 3-axis accelerometer sensor module
    • Has RSSI PWM output (0~3.3V) onboard
    • Built-in battery voltage sensor
    • Smart Port enabled

    Compatibility:     

    • FrSky Taranis X9D/ X9D Plus/X9E/Horus X12S/XJT in D16 mode
    • S6R-EU only work with FrSky Tatanis X9D-EU/ X9D Plus-EU / X9E-EU / Horus X12S-EU / XJT-EU in D16 mode

    Model:    

    • 6CH receiver with buil-in 3-axis gyro and 3-axis acceleration

    Specifications:

    • Dimension: 47.42*23.84*14.7mm(L*W*H)
    • Weight: 12.1g
    • Operating Range: full range
    • Operating Voltage Range: 4.0~10V
    • Operating Current: 100mA@5V
    • Number of Channels: 6CH (1~6CH from conventional channel outputs)
    • Measurement Range: ±4g

     

    SKU: FRS-S6R-EU
    €31.90
    inc. VAT

     IN STOCK
  • FrSky SBUS to CPPM Decoder with Pins

    FrSky SBUS to CPPM Decoder with Pins

    FrSky SBUS to CPPM Decoder with Pins

    The FrSky SBUS & CPPM Decoder can be used to decode SBUS or CPPM signals and converts them to PWM signals for use with conventional analog and digital servos.  
    This decoder is compatible with receivers that feature the SBUS port.
    A few examples are the FrSky TFRSB 9TFR4SB, TFR8SB) and X series (X8R, X6R) receivers and the Futaba S.BUS receivers (R6208SB, and others) as well as tools like the FrSky SBUS Servo Channel Changer and the Futaba SBC-1.

    Specification:

    • Channel Output Cable Lengths: 210mm
    • Total length: 350mm
    • Operating Temperature Range: -10-80℃
    • Operating Voltage Range: 4-10V
    • Compatibility for SBUS Connection Port: FrSky SBUS Servo Channel Changer, FrSky TFR8SB receiver, Futaba SBC-1 or Futaba S.BUS receivers (R6208SB, etc.)
    • Compatibility for PWM Connection Ports: digital servos

    SKU: FRS-DECODER
    €16.90
    inc. VAT

     LOW STOCK
    NEW
  • FrSky SCC Servo channel changer (SBUS, CPPM)

    FrSky SCC Servo channel changer (SBUS, CPPM)

    FrSky SCC Servo channel changer (SBUS, CPPM)

    The FrSky Servo Channel Changer is a tool designed for setting the channel of FrSky S.BUS & CCPM compatible servos (e.g. D12MB, Futaba S.BUS servos and the FrSky S.BUS to PWM Decoder).
    Simply connect the servo or decoder to the servo connection port of this device and a power source to the battery connection port.
    Then use the roller switch to change and set the channel numbers accordingly.

    Specification:

    • Dimensions: 48x67x22mm
    • Weight: 6.7g
    • Operating Voltage: 3~16V
    • Operating Temperature: -10~45°C
    • Compatibility: FrSky S.BUS & CCPM compatible servos, Futaba S.BUS servos, FrSky S.BUS to PWM Decoder

    SKU: FRS-SCC
    €22.90
    inc. VAT

     IN STOCK
    NEW
  • FrSky Smart Port Mini Lipo Voltage Sensor (MLVSS)

    FrSky Smart Port Mini Lipo Voltage Sensor (MLVSS)

    Introducing the MLVSS (Mini Lipo Voltage Sensor w/ Smartport). FrSky miniaturized the FLVSS by removing the OLED screen and reconfiguring the remaining circuit into a more compact design that has reduced the size and weight of the original by approximately half. This appeals to those of us who have smaller, or weight critical aircraft. Other than the absence of the OLED screen, the functionality of the MLVSS is identical to that of the FLVSS, with the exception that you cannot connect two of these in series to measure voltages in excess of 6s.

    Specs:

    • Dimensions: 43 x 19 x 8mm
    • Weight: 2.8g
    • Voltage Range: 2s - 6s (6 - 25V)
    • Power Consumption: 10mA
    • Operating Temperature: -10 - 70°C
    • Compatibility: Smart Port enabled receivers, such as X8R,  X6R, X4R, etc.

    Warning - The MLVSS has no polarity protection! Great care should be used to make sure you ALWAYS plug in the battery correctly. If this is an issue we strongly advise to use the FLVS instead, it features polarity protection.

    SKU: FRS-MLVSS
    €15.90
    inc. VAT

     72HR STOCK
  • FRSKY TELEMETRY Receiver X4RSB CPPM EU 3/16 channels ACCST S-BUS

    FRSKY TELEMETRY Receiver X4RSB CPPM EU 3/16 channels ACCST S-BUS

    FRSKY TELEMETRY Receiver X4RSB CPPM EU 3/16 channels ACCST S-BUS EU-LBT

    Dimension: 40*22.5*6mm (L x W x H)
    Weight: 5.8g
    Operating Range: full range (>1.5km)
    Operating Voltage Range: 4.0~10V
    Operating Current: 100mA@5V
    Number of Channels: 3/16Ch (1~3ch from conventional channel outputs,1~16ch from SBUS channel)
    Compatibility: FrSky X-series Module (XJT etc.) Taranis X9D in D16 mode(X4RSB is not work with D-series Module)

    Features:

    • RSSI (PWM) output
    • Lighter weight and physically smaller than D8R-II & D6FR
    • Two selectable failsafe setting options - native failsafe or user programmable failsafe
    • External analog telemetry port (AD2)
    • SB port is compatible with Futaba S.BUS servos and FrSky SBUS&CPPM compatible servo
    SKU: FRS-X4RSB
    €36.00
    inc. VAT

     IN STOCK
  • Frsky USB to Smart Port Programming Adapter

    Frsky USB to Smart Port Programming Adapter

    New Frsky USB to S.Port Update Adapter for transferring files and firmware to the Taranis and S.Port receivers and sensors.

    SKU: FRS-USB-SPORT
    €11.60
    inc. VAT

     LOW STOCK
  • FRSKY USB UPDATE dongle for X series receivers

    FRSKY USB UPDATE dongle for X series receivers

    FRSKY USB UPDATE dongle for X series receivers,This is the SPC cable that works with the FrUSB-3 upgrading cable and allows it to connect to Smart Port devices including XJT, X8R, X6R and smart port sensors.

    SKU: FRS-SPC
    €4.90
    inc. VAT

     LOW STOCK
  • FRSKY USB-3 Upgrade cable for D-trype receivers

    FRSKY USB-3 Upgrade cable for D-trype receivers

    This USB cable is used to update the firmware on FrSky 'D' series transmitter modules DFT, DJT and DHT and also 'D' series 8-channel telemetry receivers, Sensor Hub (FSH-01) and LCD Telemetry Display Screen (FLD-02).

    Specifications

    Connection type: Standard USB
    Lead length: 300mm x 2
    Weight: 12g

    SKU: FRS-USB3
    €14.90
    inc. VAT

     LOW STOCK
  • FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

    FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

    FrSky X4R 4ch 2.4Ghz ACCST Receiver with Telemery

    Features:

    • RSSI (PWM) output
    • Lighter weight and physically smaller than D8R-II & D6FR
    • Two selectable failsafe setting options - native failsafe or user programmable failsafe
    • External analog telemetry port (AD2)

     Specification:

    • Number of Channels: 4ch
    • Operating Voltage Range: 4V~10V
    • Operating Current: 100mA
    • Operating Range: Full Range (>1.5km)
    • Dimension: 40x22.5x6mm
    • Weight: 5.8g
    • Compatibility: FrSky X-series modual (XJT, etc) & Taranis X9D in D16 Mode)

    *Note: Does not work with D-series module.

    SKU: FRS-X4R
    €36.00
    inc. VAT

     IN STOCK
    NEW
  • Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

    Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

    Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

    The R3008SB is a T-FHSS telemetry-capable receiver that features S.Bus and S.Bus2 compatibility and 8 conventional ports. The receiver also features an external battery voltage connector.

    Size: 24.9 x 47.3 x 14.3mm
    Weight: 10.1g
    Power Requirement: 4.8-7.4V
    Battery F/S Voltage: Sets up with a transmitter
    Extra Voltage Port: 0 ~ 70V DC

    Not compatible with S-FHSS/FHSS/FASST/FASSTest systems.

    SKU: F1027
    €68.00
    inc. VAT

     IN STOCK
  • Futaba R6008SP 2.4 GHz RASST receiver

    Futaba R6008SP 2.4 GHz RASST receiver

    Compact, lightweight eight-channel 2.4 GHz RASST receiver with end-mounted servo sockets. With serial output, therefore ideal for controlling helicopters, quadrocopters and other models.
    With two aerials and diversity system. With extended range of more than 3000 m, making it sutable for large-scale flying machines. Where necessary, the 13 cm long aerials can be deployed outside the model if the fuselage or chassis is made of carbon fibre or metal.

    A serial output at the receiver requires special modules in the model which are capable of reading out the signal chain and processing it appropriately, e.g. the HC 3-Xtreme or Mini-V-Stabi, Mikrokopter, etc.  Conventional servos cannot be connected directly.

    No crystals, no spot frequency selection and maximum security from same-channel interference thanks to 2.4 GHz RASST technology. High-speed Frequency Hopping for effective suppression of interference signals. High Intermediate Frequency of 800 MHz for immunity to general background interference. Integrated EASY-Link button for simple binding.

    Can be used with all FASST transmitters with 8 channels or more when set to multi-channel mode.

    Specification

    • Channel spacing: 8.00
    • Weight: 13 g
    • Channel spacing: 2048 kHz
    • Dimensions: 47 x 25 x14.3 mm mm
    • Voltage: 3.3-8.5

    SKU: F0993
    €132.50
    inc. VAT

     72HR STOCK
  • Futaba R6014 HS FASST receiver

    Futaba R6014 HS FASST receiver

    The R 6014HS receiver has a switch to select between Digital and Analogue servos. The signal pulse for digital servos on servo outputs 1-6 is even faster, which can give an even shorter latency time.
    Fitted with Dual Antenna Diversity System

    • Channel spacing: 14.00   
    • Weight: 21 g
    • Channel spacing: 2048 kHz   
    • Dimensions: 52,5 x 37,5 x 16 mm
    • Current: 50 mA

    SKU: RobbeF1059
    €179.00
    inc. VAT

  • Futaba R6303SB FASST S.Bus receiver

    Futaba R6303SB FASST S.Bus receiver

    This is the Futaba R6303SB 3-Channel 2.4Ghz FASST Micro S.Bus Receiver. Stop cable clutter with the innovative S.Bus system. It uses digital serial data communication technology to transmit control signals between your receiver and servos. A single S.Bus cable can carry signals to as many channels as your transmitter can handle. You no longer have to worry about plugging in the wrong servo to the wrong channel, because each servo knows what channel it is dedicated to in advance.

    S.Bus receivers are limited only by the number of channels your transmitter will handle. Don’t have S.Bus servos? No problem. SBD-1 S.Bus Decoder Cables let you use existing analog and digital servos, too. The Futaba S.Bus system is nothing short of revolutionary – and the revolution’s just beginning.

    Features:

    •   S.Bus system output and three conventional system channel outputs allows usage with conventional servos as well as S.Bus system compatible servos.
    •   When linking procedure is performed, receiver recognizes the signal mode (FASST 2.4GHz 7ch mode or 8ch/10ch/Multi Channel Mode) automatically
    •   High-speed or normal operating mode
    •   PWM 3CH (CH 1,2,3)
    •   S.BUS 16+2CH
    •   Small and light
    •   Dual antenna diversity (coaxial antenna)
    •   Full range
    •   Operating Voltage 3.5 – 8.4V’s

    Specifications:

    • Power Requirement: 3.7 – 7.4V
    • Power Voltage: 3.5 – 8.4V
    • Dimensions: 0.89 x 1.47 x 0.37" (22.5 x 37.4 x 9.3mm)
    • Weight: 0.25oz (7.2g)

     

    SKU: F1014
    €79.90
    inc. VAT

     LOW STOCK
  • Futaba R6308SBT FASST Telemetry receiver

    Futaba R6308SBT FASST Telemetry receiver

    Compact, lightweight R6308SBT 2.4 GHz FASST receiver with integral FASSTest® telemetry transmitter, for "transmitting model data back to the ground".

    In spite of its small size, the R6308SBT receiver features an integral FASSTest® telemetry transmitter, and can transmit a maximum of 32 telemetry data sets to the ground over a range of > 1000 m .
    Any existing FASST system can be converted to telemetry operation at any time by using an R6308SBT 2.4 GHz FASST telemetry receiver.
    Naturally the receiver is fitted with eight PWM outputs for normal servos. The PWM outputs are switchable, i.e. you can make use of either PWM channels 1...8 or 9...16. Two receivers can be operated in parallel to provide sixteen PWM channels.

    Channel 8 can be switched to S.BUS mode, in which case up to eighteen S-BUS servos or other devices can be connected to this output.
    Devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted. If two receivers are employed, the number of telemetry channels rises to 64.
    The receiver's integral transmitter sends telemetry data present at the S.BUS2 socket to the Telemetry-Box by radio; the data are then displayed on the screen, or generated in the form of audible or speech output.

    If a separate Wi-Fi-Box, No. F1667 with integral FASSTest receiver module is used, the telemetry data can also or alternatively be transmitted to a smart-phone (Android, Apple), netbook, laptop, etc., and any monitor connected to that device.

    When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.
    The outstanding features of the receiver are its small size of just 47.3 x 24.9 x 14.3 mm and weight of only 13 g you could ever need.


    SKU: F1002
    €120.00
    inc. VAT

     LOW STOCK
  • Futaba R7003SB FASSTest HV receiver

    Futaba R7003SB FASSTest HV receiver

    Compact, lightweight R7003SB 2.4 GHz FASSTest receiver with integral telemetry transmitter.

    • Smaller, only 7g, lighter 3 /18 - channel 2.4GHz FASSTest S.BUS-Receiver with full range and integrated Telemetry transmitter.
    • Ultra-slim for models with narrow fuselages.
    • With the S-BUS system for up to 18 channels, making it suitable for all models from mini-helicopters to large-scale aircraft.
    • Normal PWM-output
    • The 3 PWM-Servo channels outputs are divided in 7 groups of outputs Port 1 and 2, whereby the output allocation may be freely selected.
    • S.BUS output Up to 18 of the new, programmable S-BUS servos or peripheral devices such as gyros,
    • Flybarless systems or speed controllers can be attached in series directly to this output.
    • One feed cable for all channels.
    • No cable „spaghetti“, and reduced weight.
    • All standard servos can be connected to receivers with an S.BUS PWM adapter.
    • It does not get any simpler.
    • High Response
    • Switchable output speed of the control pulse for digital servos, 6.3 ms instead of 16 ms,
    • which leads to a still shorter reaction time.
    • Aerial Diversity
    • The 2 Aerial Diversity system continuously checks the signal level at both aerial inputs and switches over in a split second to the stronger signal with no transition period.

    Telemetry

    • S.BUS2 devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted.
    • The receiver‘s integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest transmitter, where the data are displayed on-screen or generated in audible form.
    • Alternatively, the data can be transmitted to a separate Telemetry-Box.
    • When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

    Power

    • A further voltage range from 3.7…7.4 V nominal voltage, when using 7.4 LiPo-Batteries for receiver power, all connected servos must possess the appropriate voltage capability.
    • The receiver does not feature an internal servo voltage limiter for the high voltage servo voltage.

    Recommended accessory:

    • F1001100 „Extra Voltage“ connecting lead with fuse.

    Specification:

    • Frequency band 2.4 – 2.4835 GHz
    • Spot frequencies 36
    • Channel count 18
    • Channel spacing 2048 kHz
    • Transmission system FASSTest
    • Voltage 3.7...7.4 Volt (4 - 5 Nx, 2 LiFe, 1 - 2 LiPo)
    • Current 50 mA
    • Dimensions 37.4 x 22.5 x 9.3 mm
    • Aerial length 14 cm
    • Weight approx. 7,2 g


    Set contents
    Including adapter for the „Extra Voltage“ connecting lead at Port 2.

    SKU: F1004
    €99.00
    inc. VAT

     LOW STOCK
  • Futaba R7006SB Receiver 6/18ch 2.5 GHz FASST/FASSTest

    Futaba R7006SB Receiver 6/18ch 2.5 GHz FASST/FASSTest

    Futaba’s new full range R7006SB receiver is capable of operating with either FASST or FASSTest transmission modes, and offers 6 conventional and 18 S-Bus channel outputs yet is exceptionally compact and light.

    Specifications:

    • Range: Full
    • Modulation: FASSTest & FASST
    • S.BUS / S.Bus: S.Bus & S.Bus2
    • Weight / Gewicht: 8.5g
    • Dimensions: 22.5 x 38.1 x 12.2mm
    • Voltage: 3.7 - 7.4V
    • Channels: 7 PWM or 18 S-Bus
    SKU: F-R7006SB
    €103.99
    inc. VAT

     72HR STOCK
  • Futaba R7008SB S.Bus2 2.4GHz FASSTest Receiver

    Futaba R7008SB S.Bus2 2.4GHz FASSTest Receiver

    Compact, lightweight R7008SB 2.4 GHz FASSTest receiver with integral telemetry transmitter.

    In spite of its small size of only 47.3 x 24.9 x 14.3 mm and a weight of just 13 g the R7008SB receiver is a multi-talented device. It features an integral telemetry transmitter, and can send up to 32 telemetry data sets to the ground over a range of > 1000 m.
    Naturally the receiver is fitted with eight PWM outputs for normal servos. The PWM outputs are switchable, i.e. you can make use of either PWM channels 1...8 or 9...16. Two receivers can be operated in parallel to provide sixteen PWM channels.

    Channel 8 can be switched to S.BUS mode, in which case up to eighteen S-BUS servos or other devices can be connected to this output.
    Devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted. If two receivers are employed, the number of telemetry channels rises to 64.

    The receiver's integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest transmitter, where the data are displayed on-screen or generated in audible form. If a separate Wi-Fi-Box is used, the telemetry data can also be sent by radio to a smart-phone (Android, Apple), netbook, laptop, etc., and any monitor connected to that device.

    When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

    This receiver "only" works in conjunction with the new telemetry-capable FASSTest transmitters. If you wish to use the receiver with a FASST or RASST transmitter, you need to use R6308SBT 2.4 GHz.

    SKU: F1001
    €135.00
    inc. VAT

     72HR STOCK

Manufacturers

Back