Generic Upgrades

Generic Upgrades Generic upgrades which can be used on most Helicopters

Products


  • 30-50 Size Carbon Boom support

    30-50 Size Carbon Boom support

    Carbon Boom support, with CNC caps

    SKU: RCUO-102
    €16.00 €18.00
    inc. VAT

     72HR STOCK
  • 3D AL servo horn

    3D AL servo horn

    3D CNC servo arm, for Futaba /Jr servos( standard size)
    Avaliable in - 38mm length , 1 pcs

    SKU: KRS299
    €5.00
    inc. VAT

     IN STOCK
  • 3D Purple Paddles m4

    3D Purple Paddles m4

    3D Purple Paddles (2)

    SKU: KS3282
    €4.99
    inc. VAT

     IN STOCK
  • 60-90 Flybar Hardened 4mm

    60-90 Flybar Hardened 4mm

    Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers and more 3D response for expert flyers. Pack of 1 piece, 4mm diameter, 52cm long.
    SKU: SKU14553
    €4.00
    inc. VAT

     IN STOCK
  • Ball Links NEON - Rocket city, fits all helis 2-3mm thread

    Ball Links NEON - Rocket city, fits all helis 2-3mm thread

    NEW - NEON COLOURED !!

    Made from the same low friction polymer resin as our regular "Rocket" ball links but now in high visibility neon orange, green and yellow.
    Suitable for use on 2.0 & 3 mm pushrods but can be re-drilled to suit up to a 3mm thread if required.
    Available in standard or short body versions.

    Supplied in packs of 10

    SKU: SKU14249
    €4.90
    inc. VAT

     IN STOCK
  • Ball links set

    Ball links set

    Blue or neon red colors, set of 10

    SKU: SKU14187
    €5.00
    inc. VAT

     IN STOCK
  • Boom Support Bridge

    Boom Support Bridge

    Tail Support Bridge , a Must for your heli. Stop vibrations of Boom support .

    Fits 6-8mm supports.

    SKU: KS535
    €7.50
    inc. VAT

     IN STOCK
  • Boom Support Ends

    Boom Support Ends

    Suatable for 6 MM CARBON tubes.
    Set of 4

    SKU: RCUO-117
    €10.00 €13.00
    inc. VAT

     IN STOCK
  • Canopy Rubber nuts, 450 size, set of 4

    Canopy Rubber nuts, 450 size, set of 4

    Canopy Rubber nuts, made from wear resistant rubber material.

    can be used on Any 300-450 class helicopter canopy.

    SKU: HS1279
    €3.00
    inc. VAT

     IN STOCK
  • Canopy Rubber nuts, 600-700 size, set of 4

    Canopy Rubber nuts, 600-700 size, set of 4

    Canopy Rubber nuts, made from wear resistant rubber material.

    can be used on Any 600-700 class helicopter canopy.

    SKU: H60149
    €4.00
    inc. VAT

  • CANOPY THUMB SCREW

    CANOPY THUMB SCREW

    Aluminium Thumb screw set, Very light, 4 pcs pack.

    M3, fits all size canopies

    SKU: RJX02
    €3.00
    inc. VAT

    
  • Carbon Boom ms Stinger

    Carbon Boom ms Stinger

    Carbon Boom for MS stinger

    SKU: RCM16360
    €19.00
    inc. VAT

     LOW STOCK
  • Carbon Boom support Ends set

    Carbon Boom support Ends set

    CNC ends set(caps), for 8mm tubes.

    Include 4 pcs, silver Anodized color
     

    SKU: RCRO-103
    €8.00
    inc. VAT

     IN STOCK
  • Carbon Flybar Stiffeners

    Carbon Flybar Stiffeners

    These carbon fibre flybar stiffening sets simply slide over the flybar and lock in place with alloy collars. Provide important bending resistance and help protect from handling damage. Available to suit 3 flybars.

    SKU: RCQU-H4020
    €6.00 €11.00
    inc. VAT

     LOW STOCK
  • Carbon Header Tank Mount

    Carbon Header Tank Mount

    High quality carbon fiber header tank mount for any nitro/gas heli.
    Weight - 5gr.

    SKU: RCC001
    €9.00
    inc. VAT

     IN STOCK
  • Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition.
    Fits RJX helicopters, also can fit Align and other models 600-700 size.
    Comes with metal adapters.
    SKU: UP61066
    €34.00
    inc. VAT

     IN STOCK
  • Carbon Tail Boom 22mm

    Carbon Tail Boom 22mm

    Rigid, Lighter and more Stronger then the stock metal boom, made from High Strength material.


    This is a boom to be used on helicopter with sizes OD-22 mm, ID 20.5, Length- 950 mm, so can be adapted to any heli with this OD size.

    Made in Germany

    Thanks to the new technology - this Boom is stronger then the original Metal Boom.

    SKU: RCMX-001
    €69.00 €79.00
    inc. VAT

    
  • Carbon Tail Pushrod

    Carbon Tail Pushrod

    This carbon tail pushrod kit is a must for smooth, positive and accurate tail control The kit includes a pair of CNC machined alloy servo brackets for mounting to the boom, lightweight carbon rod and a pair of end fittings .

    Sizes Available are:

    21,22,24mm

    SKU: RCQU-026
    €34.00 €37.00
    inc. VAT

     LOW STOCK
  • Clutch Liner Material - 20x12mm (4pcs)

    Clutch Liner Material - 20x12mm (4pcs)

    Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm
    4 pieces of 20x12mm

    Why do i need aftermarket material?

    The material used in today systems as Align, and others is very thin, around 0.8-1mm.

    After seen a lot of clutches broken in the air, we came with aftermarket material.
    The main reason for those breaking clutches is the distance between the clutch and the material.
    Example, the diameter of clutch( metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.
    Every technical person knows that the material which clutch made from is spring metal which expand  with turning, but it is very limited, and can expand to 0.3-0.5mm  if more space exist, the clutch risk to break.

    So if you need to change the liner, use thicker material and do the following:

    Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.
    If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.
    If you use 1.5mm, its better, however the clutch will be tight to insert,
    In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.
    You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

    The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

    SKU: SKU4053
    €10.00 €15.00
    inc. VAT

     IN STOCK
  • Clutch Lining material- for all Nitro, Gas motors

    Clutch Lining material- for all Nitro, Gas motors

    CLUTCH  LINING material, Thickness of 1.5mm , fits All nitro and gas motors using Clutch sytems.

    The biggest advantage of this material that its thicker than provided in the clutches material, and will fit better the clutch,preventing it from over openning and breaking.

    for more tips how to use it, contact us.

    Included clutch lining material +/-10x30cm, which should be enough for 5-8 liners.

    SKU: S4464
    €6.90
    inc. VAT

  • Flybar 30-50

    Flybar 30-50

    Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers.3mm FLYBAR, Set of 1 flybar
    SKU: SKU14551
    €3.00
    inc. VAT

  • Flybar Conical Weight and stiffner for 4mm flybars

    Flybar Conical Weight and stiffner for 4mm flybars

    Flybar conus weight and stiffener.
    Those conical  adapters must be fitted on any Helicopter to balance the flybar.
    The conus creates good and equal Load Sharing on the Flybar Area and will prevent the flybar to weaken and break as a result of vibrations.This is a "Must" part for any Helicopter.
    Fit 4mm flybars , made from  7075 Alu , set of 2 pieces.

    SKU: SKU9075
    €6.00
    inc. VAT

     IN STOCK
  • Flybar Weight Set 3mm

    Flybar Weight Set 3mm

    Single piece Flybar weights. Fit all models with 3mm flybars.

    Weight per pcs.: 7gr
    Diameter inside: 3mm
    This kit includes 2 pcs. inclouding set screws

    SKU: QUIP103
    €5.00
    inc. VAT

     IN STOCK
  • HD boom support 8mm

    HD boom support 8mm

    Twin 8mm diameter Carbon fibre boom support set with high quality alloy CNC machined end fittings for superior strength and durabaility. For all 60-90size helis

    SKU: AMT-05
    €18.00
    inc. VAT

     IN STOCK

Manufacturers

Back